Handleiding Goji GDTWSTG23 Koptelefoon

Handleiding

Cleaning the Contact Pins

If one of the earbuds cannot be powered on, or the

earbud status indicator is ashing abnormally while

it is charging, it may be caused by poor charging

connection. You may need to clean the contact pins by

following the steps below:

1. Slightly dampen a cotton swab with isopropyl

alcohol and gently wipe the contact pins in the

charging case and on the earbuds thoroughly.

2. Repeat the cleaning until all the dirt or dust have

been totally removed.

3. Put the earbuds back into the charging case. When

the earbuds can be charging again properly, the

earbuds status indicators will light up red or blue.

Operations

If you receive or make a call while listening to music, the

music is paused until you end the call.

To Tap the touch sensor

Turn On

• Put the earbuds into your

ears, you will hear “Power

On” from the earbuds.

• Or, tap and hold 5 seconds,

you will hear “Power On”

from the earbuds. (When

power off)

Turn Off Tap and hold 5 seconds, you

will hear “Power O” from

the earbuds.

Playback Functions

Increase volume Twice (right earbud)

Decrease volume Twice (left earbud)

Play / Pause track Once

Skip to next track Tap and hold 1 second (right

earbud)

Go to previous track Tap and hold 1 second (left

earbud)

Not compatible with all smartphone brands;

please check your individual smartphone user

manual.

To Earbuds status indicators

Turn On Blue indicator ashes 3 times

Turn Off Red indicator ashes 3 times

Enter pairing Red and blue indicator ash

alternately

Play track Blue indicator ashes every 3

seconds

Pause track Blue indicator ashes every 5

seconds

Answer call Blue indicator ashes 3 times

every 5 seconds

To Tap the touch sensor

Call Functions

Answer / End a call Once

Reject a call Tap and hold 1 second

Reset Earbuds

If there are any connection problems with the earbuds,

please reset by following the steps below:

1. Place both earbuds into the charging case and close

the lid.

2. Wait for a few seconds. Then take both earbuds out of

the charging case to pair again.

If reset does not x your issue or one or both of your

earbuds are still unresponsive, please try Factory Reset

as below:

Specications

Earbuds

Model GDTWSTG23

Sensitivity 105 dB ± 3 dB (SPL at 1 KHz &

126 mV,1 mW)

Impedance 16 Ω

Frequency Response 20 Hz - 20 kHz

Bluetooth® Interface Bluetooth® 5.0

Bluetooth® Profiles A2DP, AVRCP, HFP, HSP

Charging Case

Battery Type Li-ion Rechargeable

Battery

Battery Capacity 500 mAh

Input DC 5 V, 330 mA

Charging Time Within 3 hours

Operating Temperature 10 – 35 °C

Dimension (L × W × H) 61.2 × 27.2 × 51.1 mm

Net Weight 35.5 g

Features and specications are subject to change

without prior notice.

Batteries

Earbuds

Model YJ581012

Battery Type Li-ion Polymer Cell

Battery Rating 3.7 V / 48 mAh

Designation Code ICP6/11/11

Manufacturer Y J Power Group Limited

Dimension (L × W × H) 6.8 × 10.5 × 10.8 mm × 2

Net Weight 1± 0.1g x 2

Charging Case

Model 902030

Battery Type Li-ion Rechargeable Battery

Battery Rating 3.7 V / 500 mAh / 1.85 Wh

Designation Code 1ICP9/20/30

Manufacturer Dongguan Pengcheng

New Energy Technology

Co., Ltd.

Dimension (L × W × H) 9.2 × 20.5 × 32.5 mm

Net Weight 11± 0.1g

Factory Reset

Power o the earbuds:

1. Tap and hold the touch sensor

for 5 seconds. You will hear

“Power o” from the earbuds.

Touch sensor

Touch

sensor

contact pins

contact pins

Earbud status

indicator

Reset the earbuds:

2. Tap and hold the touch sensor

for approximately 12 seconds.

3. You will hear “Power on”,

“Pairing” and a “Di” sound.

Release the touch sensor right

after the“Di” sound and the

earbuds will be turned o again.

4. Place the earbuds back into the

charging case and close the lid.

Wait for a few seconds.

5. Take the earbuds out of the

charging case and pair again.

Operating Distance Up to 10 m

Frequency Range 2400 - 2482 MHz

Max. Transmitted

Power

3 dBm EIRP

Battery Type Li-ion Polymer Battery Pack

Battery Life Up to 4 hours

Charging Time Within 2 hours

Operating

Temperature

10 – 35 °C

Dimension

(L × W × H)

20.27 × 21.48 × 31.55 mm

× 2

Net Weight 3.6 g × 2

Hints and Tips

If product is not working:

• Recharge the earbuds.

• Ensure the earbuds are switched on.

• Ensure your Bluetooth®-enabled device’s wireless

function is active.

• Move earbuds closer to the device.

• Re-pair the earbuds with the device.

• Ensure there are no other wireless devices within

discovery mode.

• Try to disconnect and then re-establish the

Bluetooth® connection.

• Try to reset your devices.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Goji GDTWSTG23 Koptelefoon. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Goji. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Goji GDTWSTG23 Koptelefoon in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Goji Koptelefoons
Meer handleidingen voor Koptelefoons

Veelgestelde vragen over Goji GDTWSTG23 Koptelefoon

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Goji GINBT14 Koptelefoon

Handleiding

Goji GRETWSW24 Koptelefoon

Handleiding

Goji GTCONRG18 Koptelefoon

Handleiding

Goji GTCIBTB18 Koptelefoon

Handleiding

Goji GINBT15 Koptelefoon

Handleiding

Goji G4BOEBK14 Koptelefoon

Handleiding

Goji GTCUSBC19 Koptelefoon

Handleiding

Goji GSPINBT16 Ear Hook Koptelefoon

Gerelateerde categorieën