Handleiding Graco 2M19VIB Secure Coverage Babyfoon

Handleiding voor je Graco 2M19VIB Secure Coverage Babyfoon nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 2 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

Parent Unit
• The battery must be plugged into the Parent Unit before the
unit will be ready for use. Remove the battery door cover on the
Parent Unit with a key or flat blade screw driver. Remove the battery
pack from the packaging and plug into the back of the unit. Place
the battery pack into the recess and press the wire into the slot on
the side. Replace the battery door.
Nursery Unit
• Turn the unit over, and use screw driver to remove the battery door.
• Place 3-AAA (1.5V-LR03) batteries into the battery compartment. Note
the proper orientation of the batteries.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon zinc), or rechargeable
(ni-cadmium, etc) batteries.
• Place the battery door back on the unit.
• Please remove a dead battery promptly. A dead battery left in the unit
may leak, damaging your unit.
• Do not attempt to recharge a non-rechargeable battery.
• A rechargeable battery CANNOT be recharged by plugging the AC
adapter into the Nursery Unit.
• Remove the batteries from the unit if it is no longer being used or will
be stored for an extended period of time.
• The Parent Unit(s) can use either the rechargeable battery that comes with the unit or standard 120 volt AC household
current. The Nursery Unit uses 3-AAA (1.5V-LR03) batteries or standard 120 volt AC household current.
• To use AC adapters, plug the connector on the cord into the AC adapter jack on the side of the Parent Unit and the back of the
Nursery Unit, then plug adapter into a standard wall outlet.
• Use ONLY the Graco adapters included with the unit. Do not use these adapters with other equipment under any
circumstances.
• If units do not work, check that AC adapters are plugged into working outlets.
• When electricity is off (from a power failure, etc.), the Nursery Unit will operate on 3-AAA (1.5V-LR03) batteries. If the Power
LED is not lit, turn the power off and then back on to the Nursery Unit. A green LED indicates that the batteries are fine. A red
LED indicates that the batteries are low. If the LED does not light at all, then replace the batteries. The Parent Unit will operate
if the rechargeable battery is charged.
• In case you are experiencing some interference, the channel on the Nursery Unit can be changed by pressing the “ch”
button on the side of the unit. The Parent Unit will automatically scan all of the available channels until it locks on to the
Nursery Unit. If you are still experiencing interference, press the channel button on the side of the Nursery Unit up to 6
times until a good channel is found.
Battery Installation
Using AC Adapters
Selecting Channels
3
+
-
+
-
+
-
Plug in cord
Batteries should be disposed of properly
by recycling.
Download de handleiding in het Nederlands en/of Engels (PDF, 0.27 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Graco 2M19VIB Secure Coverage Babyfoon vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Graco 2M19VIB Secure Coverage Babyfoon?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Graco 2M19VIB Secure Coverage Babyfoon. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Graco 2M19VIB Secure Coverage Babyfoon. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Graco. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Graco 2M19VIB Secure Coverage Babyfoon in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Graco
Model 2M19VIB Secure Coverage
Categorie Babyfoons
Bestandstype PDF
Bestandsgrootte 0.27 MB

Alle handleidingen voor Graco Babyfoons
Meer handleidingen voor Babyfoons

Veelgestelde vragen over Graco 2M19VIB Secure Coverage Babyfoon

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Waarom haalt mijn babyfoon niet het bereik dat in de brochure/handleiding staat? Geverifieerd

Het bereik dat merken opgeven voor een babyfoon is vaak gebaseerd op gebruik zonder obstakels zoals muren of meerdere verdiepingen. Als het bereik tekortschiet, probeer de babyfoon dan zo te plaatsen dat het aantal obstakels minimaal is.

Ik vind dit nuttig (657) Lees meer

Als ik bij mijn baby luister dan hoor ik duidelijke ademhaling, maar de babyfoon laat deze niet horen. Hoe kan dit? Geverifieerd

Dit heeft te maken met de gevoeligheid van de babyfoon. Verhoog de gevoeligheid van de babyfoon om zachtere geluiden door te geven.

Ik vind dit nuttig (336) Lees meer
Handleiding Graco 2M19VIB Secure Coverage Babyfoon

Gerelateerde producten

Gerelateerde categorieën