Handleiding Hitachi WR 16SA Slagmoersleutel

Handleiding

5

English

Don’t use tool for purpose not intended —for

example— don’t use circular saw for cutting tree

limbs or logs.

10. NEVER use a power tool for applications other

than those specified.

NEVER use a power tool for applications other than

those specified in the Instruction Manual.

11. Handle tool correctly.

Operate the tool according to the instructions

provided herein. Do not drop or throw the tool.

NEVER allow the tool to be operated by children,

individuals unfamiliar with its operation or

unauthorized personnel.

12. Keep all screws, bolts and covers tightly in place.

Keep all screws, bolts, and plates tightly mounted.

Check their condition periodically.

13. Do not use power tools if the plastic housing or

handle is cracked.

Cracks in the tool’s housing or handle can lead to

electric shock. Such tools should not be used until

repaired.

14. Blades and accessories must be securely mounted

to the tool.

Prevent potential injuries to youself or others.

Blades, cutting implements and accessories which

have been mounted to the tool should be secure

and tight.

15. Keep motor air vent clean.

The tool’s motor air vent must be kept clean so

that air can freely flow at all times. Check for dust

build-up frequently.

16. Operate power tools at the rated voltage.

Operate the power tool at voltages specified on its

nameplate.

If using the power tool at a higher voltage than

the rated voltage, it will result in abnormally fast

motor revolution and may damage the unit and

the motor may burn out.

17. NEVER use a tool which is defective or operating

abnormally.

If the tool appears to be operating unusually,

making strange noises, or otherwise appears

defective, stop using it immediately and arrange

for repairs by a Hitachi authorized service center.

18. NEVER leave tool running unattended. Turn power

off.

Don’t leave tool until it comes to a complete stop.

19. Carefully handle power tools.

Should a power tool be dropped or struck against

hard materials inadvertently, it may be deformed,

cracked, or damaged.

20. Do not wipe plastic parts with solvent.

Solvents such as gasoline, thinner benzine, carbon

tetrachloride, and alcohol may damage and crack

plastic parts. Do not wipe them with such solvents.

Wipe plastic parts with a soft cloth lightly

dampened with soapy water and dry thoroughly.

21. ALWAYS wear eye protection that meets the

requirement of the latest revision of

ANSI Standard Z87.1.

22. When working in high places, check there is

nobody below. During operation, take care not to

catch or tighten the cord accidentally.

23. Switch the reversing switch only after the motor

is stopped when it is necessary to change the

direction of the rotation.

24. Use a step up transformer when a long extension

cable is used.

25. Confirm the tightening torque by a torque wrench

before use in order to ascertain the correct

tightening torque to be used.

26. Attach the hex. socket securely onto the anvil. If

the hex. socket is insufficiently secured, it may drop

out and cause an accident. For hex. socket

attachment refer to "PRIOR TO OPERATION" on

page 8.

27. Confirm whether the socket has any crack in it.

28. Definitions for symbols used on this tool

V ............... volts

Hz ............. hertz

A ............... amperes

n

o .............. no load speed

W .............. watt

............ Class II Construction

---/min ...... revolutions per minute

.............. Alternating current

DOUBLE INSULATION FOR SAFER

OPERATION

To ensure safer operation of this power tool, HITACHI

has adopted a double insulation design. “Double

insulation” means that two physically separated

insulation systems have been used to insulate the

electrically conductive materials connected to the power

supply from the outer frame handled by the operator.

Therefore, either the symbol “ ” or the words “Double

insulation” appear on the power tool or on the

nameplate.

Although this system has no external grounding, you

must still follow the normal electrical safety precautions

given in this Instruction Manual, including not using the

power tool in wet environments.

To keep the double insulation system effective, follow

these precautions:

䡬

Only HITACHI AUTHORIZED SERVICE CENTER

should disassemble or assemble this power tool,

and only genuine HITACHI replacement parts

should be installed.

01Eng_WR16SA_US 10/9/12, 4:19 PM5

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Hitachi WR 16SA Slagmoersleutel. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Hitachi. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Hitachi WR 16SA Slagmoersleutel in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Hitachi Slagmoersleutels
Meer handleidingen voor Slagmoersleutels

Veelgestelde vragen over Hitachi WR 16SA Slagmoersleutel

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Hitachi WR 12DH Slagmoersleutel

Handleiding

Hitachi WR 14VB Slagmoersleutel

Handleiding

Hitachi WR 9DMR Slagmoersleutel

Handleiding

Hitachi WH 14 Slagmoersleutel

Handleiding

Hitachi WR 18DBDL Slagmoersleutel

Handleiding

Hitachi WR 18DHL Slagmoersleutel

Handleiding

Hitachi WR 18DMR Slagmoersleutel

Handleiding

Hitachi WR 14DMR Slagmoersleutel

Gerelateerde categorieën