Handleiding Holmes HANF76BLZ07-UC Ventilator

Handleiding voor je Holmes HANF76BLZ07-UC Ventilator nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 2 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS
FEATURES - OPERATIONS
NOTE: Ensure that fuse
cover is completely open
before attempting to
remove fuse.
3. Remove fuse carefully by
using a small screwdriver
to pry the fuse out of the
compartment by the metal
ends of the fuse. (see
Figure 2)
4. Place plug on a solid, flat surface. Insert new 5 Amp,
125 Volt fuse into fuse compartment and use a small
screwdriver to secure the metal ends of the fuse into
the compartment.
CAUTION: Risk of fire. Replace fuse only with 5
Amp, 125 Volt fuse.
5. Slide fuse cover closed completely. If fuse cover is
difficult to close, make sure fuse is secured in place
completely by pressing down on metal ends of the fuse.
6. Risk of fire. Do not replace attachment plug. Contains
a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
FAN CLEANING
Always unplug the fan before cleaning or
disassembling.
Do not allow water to drip on or into the fan motor
housing.
Use a soft cloth moistened with a soap solution to
carefully clean the front and rear grills.
Do not use any of the following as a cleaner:
gasoline, thinner, benzene.
We recommend the periodic cleaning of your fan by
lightly running a vacuum cleaner nozzle over the fan grill
to remove any dust or dirt that may have accumulated
inside or on the unit.
NOTE: Please be cautious around the motor housing
area. Do not allow the motor or electronics to be exposed
to water. Do not attempt to take off the grills of this fan
or access the blade in any way.
FAN STORAGE INSTRUCTIONS
Your fan should be stored in the off-season in its original
box. It is important to keep it in a safe, dry location.
We recommend using the original (or appropriately
sized) box.
Please remember to protect the fan from dust or
moisture.
ASSEMBLY INSTRUCTIONS
Your Table Fan comes completely assembled and is ready
for immediate use. Carefully unpack your fan, read the
instructions completely, plug it in and enjoy!
OPERATING INSTRUCTIONS
1. Set fan on a dry, level surface.
2. Plug cord into any standard 120 volt AC outlet. Please
make sure the speed control is in the OFF position (
o
).
3. The Speed Control is located on the back of the Fan
Motor Housing. The speed is adjusted by turning the
speed control to the desired setting: OFF - (
o
), HIGH
- (II), LOW - (I).
ADJUSTMENT INSTRUCTIONS
Tilt Adjustment
Move or adjust the fan head to desired position.
Wall Mounting Instruction
1. Use the mounting location guide below as a template
to outline the hole location.
2. Using 1/4 inch (0.6cm) drill bit, drill pilot hole
through the wall.
3. Insert 1/4 inch (0.6cm) plastic anchors into the holes.
4. Screw in two #8-15 x 1- 1/4 inch (0.6cm) screws
through the two holes in the base.
5. Hang the fan onto the screws.
6. Hardware not included with fan.
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for
your fan. Please remember:
REPLACEABLE FUSE
If your (5 Amp, 125 Volt) replaceable fuse blows, please
visit our website at www.holmesproducts.com for
information on how to order a new fuse. Follow the below
instructions to replace the fuse on the plug.
User Servicing Instructions
1. Unplug your fan. Grasp plug and remove from the
receptacle or other outlet device. Do not unplug by
pulling on cord.
2. Open fuse cover, located on the top of the plug, by
using your thumb or a flathead screwdriver to slide
the cover down towards the prongs.
When using electrical appliances, basic safety precautions
should always be taken including the following:
1. Read all instructions before using this appliance.
2. Use fan only for purposes described in the instruction
manual.
3. To protect against electrical shock do not immerse
unit, plug or cord in water or spray with liquids and
plug the appliance directly into a 120V AC electrical
outlet.
4. Close supervision is necessary when any appliance is
used by or near children.
5. Unplug from outlet when not in use, when moving
fan from one location to another, before putting on
or taking off parts and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate in the presence of explosive and/or
flammable fumes.
8. To avoid fire hazard, NEVER place the cord under
rugs or any parts near an open flame, cooking or
other heating appliance.
9. Do not operate any appliance with a damaged cord
or plug after the appliance malfunctions, or has been
dropped/damaged in any manner. Discard fan or
return to an authorized service facility for
examination and/or repair.
10. Do not run cord under carpeting. Do not cover cord
with throw rugs, runner, or similar coverings. Do not
route cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be
tripped over.
11. The use of attachments not recommended or sold by
the appliance manufacturer may cause hazards.
12. Do not let the cord hang over the edge of a table,
counter or come in contact with hot surfaces or leave
exposed to high traffic areas.
13. Do not use outdoors.
14. To disconnect, grip plug and pull from wall outlet.
Never yank on cord.
15. Always use on a dry, level surface.
16. Do not operate fan until fully assembled with all
parts properly in place.
17. This product is intended for household use ONLY and
not for commercial or industrial applications.
18. WARNING: To reduce the risk of electrical shock
and injury to persons, do not use in window.
19. WARNING: To reduce the risk of fire or electric
shock, do not use this fan with any solid-state speed
control device.
20. This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from
the outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse
rating) and check the product. If the replacement fuse
blows, a short circuit may be present and the product
should be discarded or returned to an authorized
service facility for examination and/or repair.
PLEASE READ AND SAVE
THESE IMPORTANT
SAFETY INSTRUCTIONS
CLEANING / MAINTENANCE
A
A. Fan Head
B. Tilt Adjustment
Knob
C. Fan Base
C
B
Figure 1
MOUNTING LOCATION GUIDE
Use this diagram to help properly line up screws.
If you have any questions regarding your product or
would like to learn more about other Holmes
®
products, please visit our website at
www.holmesproducts.com. For inquiries regarding
recycling and proper disposal of this product, please
contact your local waste management facility.
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit in
a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
Figure 2
Fuse
Metal ends
Fuse cover
HANF76BLZ-UC_15EM1.indd 2 1/20/15 9:55 AM
Download de handleiding in het Nederlands en/of Engels (PDF, 0.49 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Holmes HANF76BLZ07-UC Ventilator vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Holmes HANF76BLZ07-UC Ventilator?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Holmes HANF76BLZ07-UC Ventilator. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Holmes HANF76BLZ07-UC Ventilator. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Holmes. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Holmes HANF76BLZ07-UC Ventilator in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Holmes
Model HANF76BLZ07-UC
Categorie Ventilatoren
Bestandstype PDF
Bestandsgrootte 0.49 MB

Alle handleidingen voor Holmes Ventilatoren
Meer handleidingen voor Ventilatoren

Veelgestelde vragen over Holmes HANF76BLZ07-UC Ventilator

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Heeft een ventilator invloed op de kamertemperatuur? Geverifieerd

Nee, een ventilator verplaatst alleen de lucht, wat een verkoelend effect op de huid heeft.

Ik vind dit nuttig (147) Lees meer

Wat is de beste plek voor een ventilator? Geverifieerd

Als een bron van koude lucht is, zoals een airconditioner, dan kan een ventilator gebruikt worden om deze koude lucht beter en verder te verdelen. Indien alleen de ventilator gebruikt wordt dan is het het beste deze op hoofdhoogte te plaatsen. Het hoofd is één van de lichaamsdelen dat het meeste transpireert en bewegende lucht helpt dan bij het afvoeren van warmte. Dit geeft het meest verkoelende effect.

Ik vind dit nuttig (115) Lees meer
Handleiding Holmes HANF76BLZ07-UC Ventilator

Gerelateerde producten

Gerelateerde categorieën