Each user can store up to 60
measurements.
+ button
MEM button to access the
Memory.
MEM button will recall a
START/STOP button.
USER button
MEM button to access the Memory.
DATE/TIME
SET buttons (
the data for the selected user will
Note:
• Follow local ordinances and recycling instructions regarding disposal or
Warranty section of this manual.
outside these temperature and humidity ranges:
SYMPTOMS POSSIBLE CAUSES CORRECTION
when the START/
STOP button is
pushed.
down.
incorrectly.
in the correct positions.
EE measurement
on display or the
the arm incorrectly.
properly so that it is
positioned correctly. Take
new measurement.
during measurement?
Keep arm steady during
measurement. Measure
again. Refer to
Shaking of the arm
communications equipment.
Test frequency (MHz) Modulation IMMUNITY TEST LEVEL (V/m)
NOTE:
LIMITED 5-YEAR WARRANTY
extends only to consumers and does not extend to Retailers.
warranties or guarantees shall immediately cease and terminate as to any products or
limitations and exclusions may not apply to you.
including interference that may cause undesired operation.
U.S. Contact Information
Company: Homedics, LLC.
Address: 3000 N. Pontiac Trail, Commerce Township, MI 48390
8:30am-7:00pm EST Monday-Friday 1-800-466-3342
This
particular installation. If this equipment does cause harmful interference
•
•
•
•
ELECTROMAGNETIC COMPATIBILITY (EMC)
Guidance and manufacturer’s declaration – electromagnetic emissions
Emissions test Compliance
Electromagnetic environment -
guidance
Class B
purposes.
Guidance and manufacturer’s declaration – electromagnetic immunity
Immunity
test
IEC 60601
test level
Compliance
level
Electromagnetic
environment-guidance
Electrostatic
discharge
discharge
discharge
discharge
following ranges:
Power
frequency
location in a typical commercial or
Guidance and manufacturer’s declaration – electromagnetic immunity
Immunity test IEC 60601 test level Compliance
level
Electromagnetic environment-
guidance
Conducted RF
communications equipment
separation distance calculated
to the frequency of the
transmitter.
adiated RF
from RF wireless
communications
equipment
pulse Mode and
other Modulation.
from RF wireless
communications
equipment using
the test methods
Mode and other
Modulation. The
from RF wireless
communications
equipment using the
Recommended separation
distance Considering to reduce
the minimum separation
for the reduced minimum
separation distance. Minimum
separation distances for higher
following equation:
E = 6/d
where P is the maximum
Interference may occur in the
shown on display.
plugged into monitor
correctly.
Take new measurement.
shown on display.
new measurement.
shown on display.
Error determining
measurement data.
properly so that
it is positioned
correctly. Take new
measurement.
on display.
System error.
measurement.
Note:
found on the Warranty page.
Measurement Method:
Rated Range of Cu
Pressure:
Measurement Range:
Rated Range of
Determination:
Accuracy:
Pulse:
Pressure Sensor:
Ination:
Deation:
Display: Liquid Crystal Display
Memory:
Unit Dimensions:
Unit Weight:
Cu Size:
Storage/Transportation
Environment:
<
Operation Environment:
Atmospheric pressure:
Power Supply:
Battery Life:
Product Life:
Sleeping Mode:
Accessories:
Internally powered equipment
Type BF equipment
loading
Follow instructions for use
Note:
POTENTIAL FOR ELECTROMAGNETIC INTERFERENCE
SUPPLIER’S DECLARATION OF CONFORMITY
Product Description: Blood Pressure Monitor
Model Numbers:
Trade Name:
FCC Compliance Statement
RECALLING VALUES FROM MEMORY
CLEARING VALUES FROM MEMORY
CARE, MAINTENANCE AND CLEANING
TROUBLESHOOTING
Storage/Transportation Environment Operating Environment
SPECIFICATIONS
WARRANTY
Praat mee over dit product
Laat hier weten wat jij vindt van de Homedics BPW-300 Bloeddrukmeter. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.