Handleiding Honeywell CM61 Thermostaat

Handleiding

How can I switch the CM61 off?

Press the OFF button. The unit has an intelligent built-in frost protection

feature, so that if the temperature falls below 5°C, it will automatically

switch the heating on.

How do change the batteries?

With no other accessories tted and for applications other than electric

heating, the batteries should last about 4 years.

When the batteries need replacing, a ashing symbol will be

displayed.

To change the batteries:

1. Lift up the front ap to reveal the battery compartment. Open the

battery compartment by inserting a coin underneath the bottom right

edge of the ap and lift out.

2. Replace the used batteries with 2 new AA LR6 Alkaline Batteries and

push the battery compartment rmly back into the front of the unit.

RESPECT YOUR ENVIRONMENT!

Take care to dispose of used batteries carefully.

NOTE: If you take more than one minute to change the batteries the clock

may need to be reset - see How do I adjust the time?

Can I use my CM61 to control my air-conditioning

system?

Yes. Please refer to your installer for more information.

What does 'SERVICE' on the display of my CM61

mean (optional)?

NOTE:

This option only works if activated by your installer.

The 'SERVICE' indicator is displayed at set intervals as a reminder that

your heating system requires a routine check. Please call your installer

to arrange a maintenance visit.

The symbol will remain on the display of the CM61 until it is either reset

or disabled by your installer. The CM61 and heating system will continue

to operate as normal.

How do I set the time?

The time can be set with the CM61 in the AUTO, MAN or OFF operating

modes. Press

+ or

-

until the correct time is displayed. Each button

press will change the time by one minute. Holding the button down for a

few seconds will change the time slowly at rst, then quickly. Make sure

AM or PM is correct.

How do I get started with the factory default tem-

perature program?

Press the AUTO button. The CM61 will now control your heating using

the built-in temperature program:-

3. Press TEMP

or

to adjust the rst temperature level. Holding

the button down will change the temperature quickly. The temperature

can be set in 0.5°C steps from 5°C to 30°C.

4. Press PROG 2 to display the second temperature level and time

levels. Set these by pressing

+ or

-

and TEMP

or

.

5. The remaining temperature changes can be displayed by pressing

PROG buttons 3, 4, 5 and 6 and adjusted by using

+ or

-

and

TEMP

or

. (If you don’t want to use all the temperature change

times 2, 3, 4, 5 or 6 refer to the section “What if I don’t want to use

all 6 temperature change times?”).

6. Press AUTO when you have completed your programming, The CM61

will now control the room temperature to match your program.

What if I don’t want to use all 6 temperature

change times?

Although the CM61 has up to 6 temperature / time changes available

(PROG 1 – 6), any unused settings may be deleted by holding down the

appropriate button (PROG 2 – 6) for 2 seconds.

To reinstate any deleted setting hold down the button again for 2

seconds.

Can I change the programmed temperature for a

short time?

When the CM61 is in AUTO mode (display will show “AUTO”) the

temperature can be adjusted temporarily by pressing TEMP

or

. The temperature will return to the program at the next temperature

change time.

How do I check the programmed temperature?

In normal operation the temperature displayed is the actual room

temperature. To check the programmed temperature press

and the

display will show the programmed temperature with the two small

arrows.

How do I set one temperature for the whole day?

To operate as a simple thermostat with one temperature throughout the

day, press MAN. Adjust the manual temperature by pressing

TEMP

or

. The manual temperature can be set anywhere from 5°C to 30°C

in 0.5°C steps.

I am going on holiday for a few days. How do I

save energy but ensure that the house is warm

when I return?

1. Make sure the CM61 is in AUTO or MAN mode.

2. Press (HOLIDAY) to display the holiday days counter and

temperature.

3. Press

+ or

-

to set the holiday time (1 - 99 days).

4. Press TEMP

or

to set the holiday temperature (5°C - 30°C).

The unit will control to the new temperature for the set number of days

holiday. At midnight the holiday counter will be reduced by one until the

selected number of days have passed. The unit will then return to normal

control as set by the MAN or AUTO button.

To cancel the HOLIDAY setting, press the button a second time.

CM61 Controls/Display Layout

The diagram below details the key button functions and display

information.

PM

What other accessories can I buy that work with

the CM61?

Honeywell provides other accessories and “Add-On” modules that can

be used with your CM61, ask your installer for details :

1. Automatic Time Setting (ATS) “Add-On” Module *

The ATS module picks up a daily time signal from a transmitter in Central

Europe and corrects the time on the CM61 display. So:

• You never need to set or adjust the time

• There is no need to adjust the unit by -/+ 1 hour in summer / winter

since the unit does this automatically

• Your CM61 is the most accurate clock in your home, so you can use

this information to set-up all your other clocks.

* Not available in all Geographic Regions depending on transmitter range

and home location.

2. Outside Temperature Sensor Accessory

The Outside Temperature Sensor accessory can be tted to your CM61

to display the outside temperature. By pressing the

twice, the CM61

displays the external temperature.

3. Remote Temperature Sensor Accessory

The Remote Temperature Sensor accessory can be tted to your CM61

to control the temperature of another room where it is inconvenient to

locate the CM61 e.g. commercial premises where the public may adjust

buttons.

Daily

Program 1 2 3 4 5 6

Time 6:30 8:00 12:00 2:00 6:00 10:30

Temperature 21°C 18°C 21°C 18°C 21°C 16°C

1 2 3 4 5 6

Battery Low

Indicator

Time Display Burner on

Indicator

Temperature

Change Buttons

= increase

= decrease

Information

Enquiry

Button

Temperature

Display

Holiday ButtonOff Button

Manual Function

Button

Battery

Compartment

Time

Change

Buttons

Program

Buttons

Automatic

Function

Button

TEMP

AUTO MAN OFF

1 2 3 4 5 6

PROG

EXT

CM61 Display Backlight

The CM61 has a backlit display that

will illuminate when a button is pressed

for easier viewing of the display in low light conditions. After the last button

press the backlight will remain on for 7 seconds.

SERVICE

How do I set my own daily temperature

program?

1. Press PROG 1. The rst temperature change time and temperature

level will ash to indicate they can be changed. (the two small

arrows are displayed only when the programmed temperature level

is shown).

2. Press

+ or

-

to adjust the rst temperature change time. Holding

the button down will change the time quickly. The change time can be

set in 10 minute steps from 03:00 in the morning. The change time

can be adjusted up to 02:50 on the next morning, so you can maintain

the evening temperature after midnight.

(Note: If you attempt to move a change time past the next change

time, both times will be moved).

3. Press TEMP

or

to adjust the rst temperature level. Holding

the button down will change the temperature quickly. The temperature

can be set in 0.5°C steps from 5°C to 30°C.

1 2 3 4 5 6

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Honeywell CM61 Thermostaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Honeywell. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Honeywell CM61 Thermostaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Honeywell Thermostaten
Meer handleidingen voor Thermostaten

Veelgestelde vragen over Honeywell CM61 Thermostaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Honeywell T87M1011 Round Modulation Thermostaat

Handleiding

Honeywell TH3000 Thermostaat

Handleiding

Honeywell Chronotherm CMT907G Thermostaat

Handleiding

Honeywell CT50K1002/E1 Thermostaat

Handleiding

Honeywell Round Sound Thermostaat

Handleiding

Honeywell RTH111B1024/E1 Thermostaat

Handleiding

Honeywell CM5000 Thermostaat

Handleiding

Honeywell RCHT9610WFSW2003/W Thermostaat

Gerelateerde categorieën