Handleiding Honeywell HT350B Ventilator

Handleiding

4 5

On/Off

Press the Power button (

) once to turn the fan on.

Press the Power button a second time to turn the fan off.

Sound Level/Speed Control

The fan will automatically start on the “Sleep” level when

initially turned on. To adjust the sound level/speed up or

down, press the Fan button ( ) repeatedly to increase level.

Oscillation

To activate the Oscillation feature, press the Oscillation

button (

) once. Press the Oscillation button again to turn

the Oscillation off.

Auto Off Timer

You can set the Auto Off Timer on your fan using the remote by press-

ing the timer button ( ). You can toggle through 2, 4, or 8 hours, or

press the button a fourth time to shut the

timer off.

Remote Control Storage

When not in use, the remote control may be stored in the recessed

area located on the backside of the fan in the upper left hand corner.

Align the backside of the remote to the recessed area on the fan. A

magnet in the remote will hold the remote in place. (Fig. 5).

HT450 SERIES REMOTE CONTROL OPERATION

Fig. 5

HT450 SERIES ONLY REMOTE CONTROL BATTERY

INSTALLATION/REPLACEMENT INSTRUCTIONS

If your unit comes equipped with a remote control, you will need

to install 2 AAA batteries.

A. Remove battery door by sliding downward in direction of

arrow (Fig. 4).

B. Insert 2 AAA batteries into the remote following the

directional guides in the recessed slots.

C. Replace battery door by sliding upward opposite of arrow direction until door snaps in place.

NOTE: DO NOT MIX OLD AND NEW BATTERIES. DO NOT MIX ALKALINE, STANDARD

(CARBON-ZINC) OR RECHARGEABLE (NICKEL-CADMIUM) BATTERIES.

SEE RECYCLERS IN YOUR AREA FOR PROPER DISPOSAL OF BATTERIES.

HT450 REMOTE CONTROL ASSEMBLY INSTRUCTIONS

Fig. 4

Oscillation

To activate the Oscillation feature, press the Oscillation button ( ) once. Press the Oscillation

button again to turn the Oscillation off.

Auto-off Timer

When activated, this setting will automatically turn off your fan after the selected period of time.

To activate, choose from 2, 4, or 8 hour settings by performing the following function:

• 2 hours: Press the Timer button ( ) once.

• 4 hours: Press the Timer button twice.

• 8 hours: Press the Timer button a third time.

Press the Timer button a fourth time to turn the Timer feature off.

If the user hits the Power button, this will override all functions and the unit will shut

“OFF”. The timer setting will be cleared.

HT450 SERIES FAN OPERATION (Cont.)

USER SERVICING INSTRUCTIONS

CLEANING AND STORAGE

• Ensure the fan is turned off and unplugged.

• Use only a soft cloth to gently wipe the outer surfaces of the fan clean.

• To clean between the grilles and fan blade area, we recommend using a pipe cleaner, flexible

dust wand, vacuum cleaner or compressed air to gently remove the dust.

• To clean the rear grille use a soft dry cloth.

• DO NOT immerse the fan in water and never allow water to drip into the motor housing.

• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.

• For storage, you may leave the fan assembled and covered to protect it from dust. Store the

fan in a cool, dry place.

Note: Only the HT450 series model includes a remote control. The HT350 series model

will not operate with and does not include a remote control.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a par-

ticular installation. If this equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio TV technician for help.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Honeywell HT350B Ventilator. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Honeywell. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Honeywell HT350B Ventilator in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Honeywell Ventilatoren
Meer handleidingen voor Ventilatoren

Veelgestelde vragen over Honeywell HT350B Ventilator

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Honeywell HT-800 Ventilator

Handleiding

Honeywell HY-047B Ventilator

Handleiding

Honeywell HV-140E Ventilator

Handleiding

Honeywell HV-142E Ventilator

Handleiding

Honeywell HO-1100RE Ventilator

Handleiding

Honeywell HT-700PE Ventilator

Handleiding

Honeywell HS-120C Ventilator

Handleiding

Honeywell HT-700BE Ventilator

Gerelateerde categorieën