Handleiding Hotpoint H7I HP42 LO Vaatwasser

Handleiding

EN

3

Daily Reference Guide

LIGHT ON THE FLOOR - A LED light projected on the oor indicates

that the dishwasher is working. The light goes o at the end of a cycle.

This feature is active by default, but it is possible to deactivate it in the

“SETTINGS MENU”.

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: [email protected]

Pre-treatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and pressure of the incoming

water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor calibration. The sensor calibration can increase

program duration by up to 20 min.

PROGRAMS TABLE

Program Programs description

Drying

phase

ActiveDry

Available

options

*)

Duration

of wash

program

(h:min)

**)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

P1

Eco 50°- Program is suitable to clean normally soiled tableware,

that for this use, it is the most ecient program in terms of its

combined energy and water consumption, and that it is used to

assess compliance with the EU Ecodesign legislation.

3:30 9.5 0.76

P2

Auto Intensive 65° - Automatic pro-

gram for heavily soiled dishes and pans.

Senses the level of

soiling on the dishes

and adjusts the program

accordingly. When the

sensor is detecting the

soil level an animation

appears in the display

and the cycle duration is

updated.

2:25 - 3:10 15.5 - 24.5 1.30 - 1.70

P3

Auto Mixed 55° - Automatic program

for normally soiled dishes with dried

food residues.

1:20 - 3:00 7.5 - 19.5 0.75 - 1.20

P4

Auto Fast Wash 50° - Automatic

program for normally and lightly soiled

dishes. The everyday cycle that ensures

optimal cleaning and drying perfor-

mance in a shorter time.

1:00 - 1:50 7.5 - 15.5 0.70 - 1.10

P5

Rapid 45°

- Program is recommended for limited amount of

lightly-soiled dishes with no dried food residues. Does not include

the drying phase.

-

0:30 - 0:40 10.0 - 12.0 0.55 - 0.65

P6

Delicates 45° - Program for delicate items, which are more

sensitive to high temperatures, for example, glasses and cups.

1:40 - 1:50 12.5 - 16.5 0.95 - 1.20

P7

Good Night 55° - Suitable for night-time operation of the

appliance. Ensures optimal cleaning and drying performance

with the lowest noise emission.

3:50 - 4:10 10.5 - 14.5 0.80 - 1.15

P8

Sanitizing 65° - Normally or heavily soiled crockery, with

additional antibacterial wash. Can be used to perform

maintenance of the dishwasher.

-

1:55 - 2:10 12.0 - 19.0 1.40 - 1.80

P9

Soak - Used to refresh crockery planned to be washed later.

No detergent is to be used with this program.

-

0:12 4.5 0.10

P10

Self Clean 65° - Program to be used to perform maintenance

of the dishwasher, to be carried out only when the dishwasher

is EMPTY using specic detergents designed for dishwasher

maintenance.

-

-

1:15 11.0 1.10

FAVOURITE  The FAVOURITE program may be saved and will be easily

accessible. Find the program using PREVIOUS/NEXT, and then press

the FAVOURITE program button for 3 seconds.

DESCALE – Alarm - Limescale accumulation was detected on the

internal components of the appliance. Check if the Water Hardness

Setting is at the correct value and salt is present in the salt container (see

FIRST TIME USE), then use a descaling product (WPro brand is recommended)

with Self-Clean program. After a successful descaling, the icon will stop

being displayed.

If the actions above are not performed, product performance will deteriorate.

DESCALE warning will start blinking and «dES» alarm will appear on the

display. If still no action is taken, the appliance will only allow a certain number

of cycles to be started (indicated during «dES» alarm display) and then will

be BLOCKED to prevent component damage, with only the Self-Clean

program available. Performing a full descaling will unblock the product.

In the case of extremely high amounts of limescale, descaling may have to

be performed twice to be ecient

.

3D ZONE WASH - Thanks to the additional power jets this option

provides up to 80% more water power, a more intensive and powerful

wash in the lower rack, in the specic bottom area. This option is

recommended for washing pots and casseroles (please refer to the 3D loading

section).

HALF LOAD - If there are not many dishes to be washed, HALF LOAD is

used to save water, electricity or time, depending on the selected

program. Remember to reduce the amount of detergent.

EXTRA DRY - The higher temperature during the final rinse and the

extended drying phase allows for improved drying. The EXTRA DRY

option results in the lengthening of the wash cycle.

DELAY - The start of the program may be delayed for a period of time

between 0:30 and 24 hours.

1. Select the program and any desired options. Press the DELAY button

(repeatedly) to delay the start of the program. Adjustable from 0:30 to 24

hours. Once the 24 hours setting is reached, press the DELAY another time

to deactivate the DELAY function.

2. Press the START/Pause button and close the door within 4 sec. the timer

will begin counting down.

3. Once this time has elapsed, the indicator light switches o and the

program begins automatically.

The DELAY function cannot be set once a program has been started.

WATER TAP CLOSED – Alarm - Flashes when there is no inlet water or

water tap is closed.

ActiveDry - It is a convection drying system which automatically opens

the door during/after the drying phase to ensure exceptional drying per-

formance every day. The door opens at a temperature that is safe to your

kitchen furniture.

As additional steam protection, specially designed protection foil is added

together with the dishwasher.

To see how to mount protection foil please refer to the INSTALLATION GUIDE.

This feature is active by default, but it is possible to deactivate it in the

“SETTINGS MENU”.

OPTIONS AND FUNCTIONS

SENSING - When the sensor is detecting the soil level an

animation appears in the display (around 20 min.) and the cycle

duration is updated. SENSING is for the level of soiling on the dishes and is

present for all cycles (excepting Eco) adjusting the program accordingly.

OPTIONS can be selected/ deselected, after choosing the program, directly by pressing the corresponding button (if available - the indicator li-

ghts up) (see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED ashes rapidly

3 times and beeps will sound. The option will not be enabled. An option can change time or water or energy consumption for the program.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Hotpoint H7I HP42 LO Vaatwasser. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Hotpoint. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Hotpoint H7I HP42 LO Vaatwasser in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Hotpoint Vaatwassers
Meer handleidingen voor Vaatwassers

Veelgestelde vragen over Hotpoint H7I HP42 LO Vaatwasser

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Hotpoint FDUD 4411 P Vaatwasser

Handleiding

Hotpoint LFF 8M121 C EU Vaatwasser

Handleiding

Hotpoint HAFC 2B+26 UK Vaatwasser

Handleiding

Hotpoint PFT 8H4X UK Vaatwasser

Handleiding

Hotpoint LFB 5B019 EU Vaatwasser

Handleiding

Hotpoint LFF 8M132 IX EU Vaatwasser

Handleiding

Hotpoint ELTF 11M121 C EU Vaatwasser

Handleiding

Hotpoint LTF 11M121 C UK Vaatwasser

Gerelateerde categorieën