Handleiding Hotpoint SX 896L PX S Oven

Handleiding

6

GB

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Start-up and use

WARNING! The oven is

provided with a stop system

to extract the racks and

prevent them from coming

out of the oven (1).

As shown in the drawing,

to extract them completely,

simply lift the racks, holding

them on the front part, and

pull (2).

! The rst time you use your appliance, heat the empty oven

with its door closed at its maximum temperature for at least

half an hour. Make sure that the room is well ventilated

before switching the oven off and opening the oven door.

The appliance may emit a slightly unpleasant odour caused

by protective substances used during the manufacturing

process burning away.

! To make the setting process easier, keep the knob in

position: this will increase the scrolling speed of the numbers

on the display.

! Each setting will automatically be stored in the appliance

memory after 10 seconds.

! The touch controls cannot be activated if the user is

wearing gloves.

! In order to optimise the cooking performance, when

starting the selected function, product settings will be

applied that could cause a delayed start of the fan and

heating elements.

Some models are equipped with a system of hinges which

allows the door to close slowly, without the user having to

follow the movement through with his/her hand. To use the

system correctly, before closing the door:

• Open the door fully.

• Do not force the closing movement manually.

Control panel lock

! The control panel can be locked while the oven is off, once

cooking has started or nished and during programming.

To lock the oven controls, press and hold the button for

at least 2 seconds. A buzzer sounds and the display shows

the key symbol “n—O”. The and icons, when lit,

indicate lock function activation.

To deactivate the lock, press and hold the button again

for at least 2 seconds.

! When cleaning the appliance, the door lock may be closed

accidentally (there is an exposed spring). If this happens,

reopen it by turning the door lock upwards (see gure).

KO OK

Setting the clock

! The clock can only be set when the oven is switched off. If

the oven is in standby mode, pressing the button once will

display the current time setting. Press it again to set the time.

After connection to the power supply network or after

a blackout, the button and the digits on the TIME display

will ash for 10 seconds.

To set the clock:

1. Press the button.

2. Turn the TIMER knob towards and to adjust the

hour value.

3. Once you have reached the correct hour value, press

the button.

4. Repeat the above process to set the minutes.

If a blackout occurs, it will be necessary to reset the clock.

If the icon ashes on the display, this indicates that the

clock has not been set correctly.

Setting the minute minder

! The minute minder may be set regardless of whether the

oven is switched on or off. It does not switch the oven on or off.

When the set time has elapsed, the timer emits a buzzer

that will automatically stop after 30 seconds or when any

active button on the control panel is pressed.

To adjust the timer proceed as follows:

1. Press button .

2. Turn the TIMER knob towards and to adjust the

hour value.

3. Once you have reached the desired value, press the

button again.

The lit symbol will remind you that the minute minder

is on. The DISPLAY will show the countdown.

To cancel the minute minder, press the button and use

the knob to set the time to 00:00. Press button again.

The icon will switch off to indicate that the minute minder

has been disabled.

Starting the oven

1. Switch the control panel on by pressing the button.

The appliance buzzer sounds three times (ascending) and

all buttons light up in sequence.

2. Select the desired cooking mode by turning the

SELECTOR knob. The display shows:

- the temperature associated with the mode, if programming

manually;

- “Auto” and the duration alternately, if programming is

automatic.

3. Press the button to begin cooking.

4. The oven will begin its preheating phase, the preheating

indicators will light up as the temperature rises.

5. When the preheating process has nished, a buzzer

sounds and all the preheating indicator lights show that this

stage has been completed: the food can then be placed in

the oven.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Hotpoint SX 896L PX S Oven. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Hotpoint. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Hotpoint SX 896L PX S Oven in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Hotpoint Ovens
Meer handleidingen voor Ovens

Veelgestelde vragen over Hotpoint SX 896L PX S Oven

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Hotpoint SX 1038N CX S Oven

Handleiding

Hotpoint FA5 841 P IX HA Oven

Handleiding

Hotpoint FA3 530 H BL HA Oven

Handleiding

Hotpoint 2AF 530 H IX HA Oven

Handleiding

Hotpoint SHB 33J K Oven

Handleiding

Hotpoint 7O 4FA 841 JC IX HA Oven

Handleiding

Hotpoint FA3 540 H IX HA Oven

Handleiding

Hotpoint FA 55Y4 IX Oven

Gerelateerde categorieën