Handleiding Indesit DFC 2C24 A Vaatwasser

Handleiding

4

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times

and beeps will sound. The option will not be enabled.

HALF LOAD / EXTRA LIGHT

The button has two functions: HALF LOAD and EXTRA LIGHT.

Select the wash cycle and press the HALF LOAD/EXTRA LIGHT

button; the indicator light will go on.

Press the HALF LOAD/EXTRA LIGHT button again to deselect

this option.

HALF LOAD

If there are not many dishes to be washed, a half load cycle may

be used in order to save water, electricity and detergent.

The amount of detergent can be halved.

EXTRA LIGHT

Compatible with the wash cycle EXTRA only.

This option makes EXTRA suitable to large delicate crockery and

items. This option includes no drying phase.

Make sure the crockery and items are dishwasher-safe.

DELAY

It is possible to delay the start time of the program by 2, 4 or

8 hours:

1. After selecting the desired program and any other options,

press the DELAY button. The indicator light will go on.

2. Select the desired delay time by pressing the DELAY button

repeatedly. The 2 hours, 4 hours and 8 hours indicator lights

will go on in succession. If the DELAY button is pressed again,

the option is deselected and the indicator light goes o.

3. After the selection process, the countdown will begin if the

START/Pause button is pressed. The selected delay-period

indicator light is on and the START/Pause button lights up

(xed light).

4. Once this time has elapsed, the DELAY indicator light goes o

and the program begins.

The DELAY function cannot be set once a program has

started.

DRAIN OUT

To stop and cancel the active cycle, the Drain Out function can

be used.

A long press of START/Pause button, will activate the DRAIN OUT

function. The active program will be stopped and the water in

the dishwasher will be drained out.

PUSH&GO

Push&GO button is an easily distinguishable button that allows

you direct access to the Push&GO program, a wash and dry cycle

that ensures great cleaning performance in a short time. You

don’t have to worry which program to choose, Push&GO cycle

will do the work for you.

To select Push&GO program, switch on appliance, press only

Push&GO button for 3 seconds.

AUTO DOOR

Auto Door is a convection drying system which automatically

opens the door during/after drying phase to ensure exceptional

drying performance every day. Door opens at the temperature that is

safe to your kitchen furniture.

As additional steam protection, special designed protection foil is added

together with the dishwasher (depending on the model type - can be

the need to buy it). To see how to mount protection foil please refer to

(INSTALLATION GUIDE).

Auto Door functionality could be disabled by the user as follows:

• To DISABLE: Switch On, then switch O the machine. Keep the P button

pressed for 5 sec., at the end of 5 sec the dishwasher plays a short

beep. Press the ON/OFF button, the dishwasher plays the long beep.

• To ENABLE: Switch On, then switch O the machine. Keep the P button

pressed for 5 sec., at the end of 5 sec the dishwasher plays a short beep.

Press the ON/OFF button, the dishwasher plays the melody.

EXTRA

EXTRA makes it possible to carry out a heavy-duty wash cycle of

large crockery up to a max height of 53cm: baking pans, oven

grids, dripping pans, hob grids, large saucepans, serving dishes,

pizza dishes, stainless-steel hood lters.

Remove the upper rack to load bulky crockery.

Release the two locks (right and

left) and pull out the rack.

When the upper rack is tted, the

locks must be always closed.

In order for the water to reach the

crockery everywhere, arrange it as

shown in the Figure.

The cycle can also be used on large delicate crockery using the

option EXTRA LIGHT

(see OPTIONS AND FUNCTIONS)

.

Do not start the dishwasher without the upper rack using

wash cycles other than EXTRA.

To carry out the wash cycle EXTRA and EXTRA with the

EXTRA LIGHT option pour the detergent DIRECTLY INTO

THE TUB and not into the dispenser.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Indesit DFC 2C24 A Vaatwasser. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Indesit. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Indesit DFC 2C24 A Vaatwasser in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Indesit Vaatwassers
Meer handleidingen voor Vaatwassers

Veelgestelde vragen over Indesit DFC 2C24 A Vaatwasser

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Indesit DSCFE 1B10 RU Vaatwasser

Handleiding

Indesit I3B L634 B Vaatwasser

Handleiding

Indesit DFC 2C24 A X Vaatwasser

Handleiding

Indesit IDL 50 EU .2 Vaatwasser

Handleiding

Indesit DFO 3C26 X Vaatwasser

Handleiding

Indesit DF9E 1B10 Vaatwasser

Handleiding

Indesit DMIF 14B1 EU Vaatwasser

Handleiding

Indesit DIE 2B19 A Vaatwasser

Gerelateerde categorieën