Handleiding Indesit IDVA 835 (EU) Wasdroger

Handleiding

2

GB

Installation

10

m

m

15 mm

15 mm

15 mm

15 mm

B

A

Where to install the tumble dryer

If the dryer is installed below a worktop,

ensure there are 10 mm

between the upper pa-

nel of the dryer and any

objects above it, and 15

mm between the sides

of the machine and the

walls or furniture units

adjacent to it. This ensu-

res adequate air circu-

lation. Make sure the air

inlets on the rear panel are not blocked or

obstructed.

Ventilation

This appliance gently dries laundry by taking in cold, clean

and relatively dry air, heating it and passing it through the

fabric. To facilitate the drying process, damp air is expelled

at the rear, through a ventilation hose. When the dryer is in

use, there has to be adequate ventilation to avoid a back

flow of gases into the room from appliances burning other

fuels, including open fires.

Mobile ventilation system

When using the tumble dryer with the mobile ventilation

system, a ventilation hose must be connected. The hose

should be securely fastened to the ventilation hole at

the rear of the appliance (see “Description of the tumble

dryer”). We recommend the hose is connected to an outlet

near the tumble dryer, if possible. If it cannot be installed

in a permanent spot, the tumble dryer will still function

perfectly well if the ventilation hose is passed through a

partially-opened window.

Make sure you do not point the ventilation hose towards

the air inlet, which is located on the rear of the appliance.

The ventilation hose should not exceed a maximum

length of 2.4 metres; it should also be shaken frequently

to remove any fluff, dust or water deposits inside it. Make

sure you do not crush the hose. The hose supplied has an

oval section to aid installation.

Fixed ventilation kit

We recommend the ventilation hose is connected to a

ventilation kit for windows or doors, available from the

retailer which originally sold you the appliance or from your

local spare parts stockist.

Wall ventilation hole

1. Leave an opening in the wall.

2. Make the hose as short and

straight as possible, in order

to prevent any moisture from

condensing and leaking back

into the appliance.

3. The hole in the wall must

also be straight and pointing

downwards, so that the flow of

air coming out is not impeded.

Areas A and B should be

checked frequently, to prevent the accumulation of fluff or

debris, particularly if the tumble dryer is used very often.

The hose adaptor must be fitted correctly, in order to

prevent damp air from coming back into the room.

GUIDE TO FITTING THE VENT HOSE TO YOUR DRYER

Remove ‘oval-shaped’

Ventilation hose from

the packaging.Ensure

that you also remove

the two jubilee clips.If

you require to reduce

the length of the hose

please wear gloves when cutting the hose.

Pull to expand the end

of the Ventilation hose

prior to fitting.

If the hose has not

been expanded, the

jubilee clip will not

clamp the hose to the

adaptor.

Place one of the the

jubilee clips over the

end of the extended

vent hose.

The second jubilee clip

can be used to secure

the opposite end of the

vent hose to a wall mounting kit (not supplied).

Clamp the ventilation

hose to the rear vent

outlet by tightening

the jubilee clip with a

screwdriver.

If the hose has not

been expanded, the

clip will not clamp the hose to the rear vent outlet.

The tumble dryer may protrude further forward from the

worktop. Please do not push the tumble dryer too far

backwar.

Ventilation hole

The ventilation hole should be directly behind the dryer in

order to keep the hose as short as possible.

Make sure you do not push the tumble dryer too far

backwards, as this could lead to the ventilation hose being

crushed, bent or even disconnected.

There should be no cuts, kinks or “U”-shaped bends

in the hose, as these could impede ventilation or trap

condensation.

The end of the hose must be facing downwards, in order to

prevent the hot, damp air from forming condensation in the

room or the tumble dryer.

Make sure that the tumble dryer is adequately ventilated,

and that the end of the ventilation hose is not pointing

towards the air inlet pipe on the rear of the appliance.

The ventilation hose must always be fitted to ensure

optimum performance.

The hose will need to be expanded to be fitted and

clamped.

Make sure that the ventilation hose, air inlet vents, and

outlets are not obstructed or blocked.

Do not let the tumble dryer recirculate exhaust air.

Improper use of the tumble dryer may result in fire hazards.

Ventilation

The air emitted by the tumble dryer must not be expelled in

the same duct as used for the fumes produced by different

appliances which burn gas or other fuels.

Do not discharge the exhaust air into an extraction system

or any duct with an extractor fan. This will affect the way

the thermal controls operate and can result in a fire hazard.

Make sure that the room in which the

tumble dryer is installed is not damp, and

that it is adequately ventilated.

We do not recommend that the dryer is

installed in a cupboard but the dryer must

never be installed behind a lockable door,

a sliding door or a door with a hinge on the

opposite side to that of the dryer door.

The appliance must be installed with the

rear surface placed against a wall.

Electrical connections

Before plugging the appliance into the so-

cket, check the following:

Make sure your hands are dry.

The socket must have an earth connec-

tion.

The socket must be able to withstand the

machine’s maximum power output as indi-

cated on the rating plate (see Description of

the tumble dryer).

The power supply voltage must fall within

the values indicated on the rating plate (see

Description of the tumble dryer).

Do not use extension leads. Do not pull

the power supply cable. Do not use multiple

plug adaptors if the appliance is fitted with a

plug. For appliances with fitted plug, if the

plug is not suitable for you socket outlet,

contact a qualified technician.

The dryer must not be installed outdoors,

even if the space is sheltered.

Once installed, the dryer’s electrical wire

and plug must be within reach.

The power cord must not be bent or

squashed.

If the plug being replaced is a non-

rewirable type, then the cut-off plug must be

disposed of safely. DO NOT leave it where it

can be inserted into a socket and create a

shock hazard.

The electric cord must be regularly

checked. If the supply cord is damaged, it

must be replaced by service agent.

(see

Service).

The manufacturer denies any

responsibility should any of these rules not

be followed.

If in doubt about any of the above consult

a qualified electrician.

Levelling the tumble dryer

The tumble dryer should be installed level in order to

operate correctly.

After installing the tumble dryer in its permanent

position, make sure it is level; check its side-to-side

levelling first, followed by front-to-back.

If the tumble dryer is not perfectly level, use a wooden

block to support it while you adjust the two front feet, up

or down as necessary.

Before you start your dryer

Once the tumble dryer is installed, clean the inside of the

drum before operating it and remove any dirt accumulated

during transportation.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Indesit IDVA 835 (EU) Wasdroger. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Indesit. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Indesit IDVA 835 (EU) Wasdroger in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Indesit Wasdrogers
Meer handleidingen voor Wasdrogers

Veelgestelde vragen over Indesit IDVA 835 (EU) Wasdroger

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Indesit IDCL G5 B H (EU) Wasdroger

Handleiding

Indesit YT M10 71 R UK Wasdroger

Handleiding

Indesit G 31 VU (UK) Wasdroger

Handleiding

Indesit EDCE G45 B H (EU) Wasdroger

Handleiding

Indesit IDV 75 S (EU) Wasdroger

Handleiding

Indesit IDCA H G35 B (FR) Wasdroger

Handleiding

Indesit IDCA 735 S(EU) Wasdroger

Handleiding

Indesit IND90110 Wasdroger

Gerelateerde categorieën