Handleiding Indesit LD70 S1 X Koel-vries combinatie

Handleiding

4

Health & Safety guide

Installation, including water supply (if any) and

electrical connections, and repairs must be carried

out by a qualied technician. Do not repair or replace

any part of the appliance unless specically stated in

the user manual. Keep children away from the

installation site. After unpacking the appliance, make

sure that it has not been damaged during transport.

In the event of problems, contact the dealer or your

nearest After-sales Service. Once installed, packaging

waste (plastic, styrofoam parts etc.) must be stored

out of reach of children - risk of suocation. The

appliance must be disconnected from the power

supply before any installation operation - risk of

electric shock. During installation, make sure the

appliance does not damage the power cable- risk of

re or electric shock. Only activate the appliance

when the installation has been completed.

Be careful not to damage the oors (e.g. parquet)

when moving the appliance. Install the appliance on

a oor or support strong enough to take its weight

and in a place suitable for its size and use. Make sure

the appliance is not near a heat source and that the

four feet are stable and resting on the oor, adjusting

them as required, and check that the appliance is

perfectly level using a spirit level. Wait at least two

hours before switching the appliance on, to ensure

that the refrigerant circuit is fully ecient.

To guarantee adequate ventilation, leave a space

on both sides and above the appliance. The distance

between the rear of the appliance and the wall

behind the appliance should be 50 mm, to avoid

access to hot surfaces. A reduction of this space will

increase the Energy consumption of product.

WARNING: To avoid a hazard due to instability,

positioning or xing of the appliance must be done

in accordance with the manufacturer instructions. It

is forbidden to place the refrigerator in such way

that the metal hose of gas stove, metal gas or water

pipes, or electrical wires are in contact with the

refrigerator back wall (condenser coil).

ELECTRICAL WARNINGS

It must be possible to disconnect the appliance

from the power supply by unplugging it if plug is

accessible, or by a multi-pole switch installed

upstream of the socket in accordance with the

wiring rules and the appliance must be earthed in

conformity with national electrical safety standards.

Do not use extension leads, multiple sockets or

adapters. The electrical components must not be

accessible to the user after installation. Do not use

the appliance when you are wet or barefoot. Do not

operate this appliance if it has a damaged power

cable or plug, if it is not working properly, or if it has

been damaged or dropped.

If the supply cord is damaged, it must be replaced

with an identical one by the manufacturer, its service

agent or similarly qualied persons in order to avoid

a hazard- risk of electric shock.

CLEANING AND MAINTENANCE

WARNING: Ensure that the appliance is switched

o and disconnected from the power supply before

performing any maintenance operation; never use

steam cleaning equipment- risk of electric shock.

Do not use abrasive or harsh cleaners such as

window sprays, scouring cleansers, ammable

uids, cleaning waxes, concentrated detergents,

bleaches or cleansers containing petroleum

products on plastic parts, interior and door liners or

gaskets. Do not use paper towels, scouring pads, or

other harsh cleaning tools.

DISPOSAL OF PACKAGING MATERIALS

The packaging material is 100% recyclable and is marked with the recycle

symbol

.

The various parts of the packaging must therefore be disposed of

responsibly and in full compliance with local authority regulations

governing waste disposal.

DISPOSAL OF HOUSEHOLD APPLIANCES

This appliance is manufactured with recyclable or reusable materials.

Dispose of it in accordance with local waste disposal regulations.

For further information on the treatment, recovery and recycling of

household electrical appliances, contact your local authority, the

collection service for household waste or the store where you purchased

the appliance. This appliance is marked in compliance with European

Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly, you will help prevent

negative consequences for the environment and human health.

The symbol

on the product or on the accompanying documentation

indicates that it should not be treated as domestic waste but must be

taken to an appropriate collection center for the recycling of electrical

and electronic equipment.

ENERGY SAVING TIPS

Install the appliance in a dry, well ventilated room far away from any heat

source (eg. radiator, cooker, etc.) and in a place not exposed directly to

the sun. If required, use an insulating plate.

To guarantee adequate ventilation follow installation instructions.

Insucient ventilation at the back of the product increases energy

consumption and decreases cooling eciency.

Frequent door opening might cause an increase in Energy Consumption.

The internal temperature of the appliance and the Energy Consumption

may be aected also by the ambient temperature, as well as location of

the appliance. Temperature setting should take into consideration these

factors.

Reduce door opening to a minimum.

When thawing frozen food, place in the refrigerator. The low temperature

of the frozen products cools the food in the refrigerator. Allow warm

food and drinks to cool down before placing in the appliance.

Positioning of the shelves in the refrigerator has no impact on the

ecient usage of energy. Food should be placed on the shelves in such

way to ensure proper air circulation (food should not touch each other

and distance between food and rear wall should be kept).

You can increase storage capacity of frozen food by removing baskets

and, if present, Stop Frost shelf.

Do not worry about noises coming from the compressor which are

described as normal noises in this product’s Quick Guide.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Indesit LD70 S1 X Koel-vries combinatie. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Indesit. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Indesit LD70 S1 X Koel-vries combinatie in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Indesit Koel-vries combinaties
Meer handleidingen voor Koel-vries combinaties

Veelgestelde vragen over Indesit LD70 S1 X Koel-vries combinatie

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Indesit XIT9 T3U X Koel-vries combinatie

Handleiding

Indesit LR8 S2 S B Koel-vries combinatie

Handleiding

Indesit LR8 S2 W B.1 Koel-vries combinatie

Handleiding

Indesit INFC8 TT33X Koel-vries combinatie

Handleiding

Indesit LI8 SN2E W Koel-vries combinatie

Handleiding

Indesit BIAA 33 F SI Y Koel-vries combinatie

Handleiding

Indesit LI7 S1E W Koel-vries combinatie

Handleiding

Indesit LR9 S2Q F X B Koel-vries combinatie

Gerelateerde categorieën