Handleiding Inventum NB861 Blender

Handleiding

Before you use the appliance for the rst time, please do

as follows: Carefully unpack the appliance and remove

all the packaging material. Keep the material (plastic

bags and cardboard) out of reach of children. Check

the appliance after unpacking for any damage, possible

from transportation. Place the mixer on a at and stable

surface. Rinse all the accessories - glass jug, knives and

lid - with warm soapy water and dry them thoroughly.

Wipe the base with a damp cloth. Always roll out the

cord completely.

When the mixer is in use, the ingredients will be

transported along the sides of the jug to the top and will

come down through the middle. This system guarantees

that even ice cubes will be completely crushed.

A plastic lock ring is connected at the bottom of the jug.

This ensures the jug to stand stable on a at surface.

Make sure that all the parts are dry before you use the

appliance.

• Place the mixer on a at and stable surface as soon as

you have rolled out the cord.

Practice a few times to disassemble and assemble the

mixer without any ingredients.

• The middle of the lid has a cap which can be used as a

measuringcup and for adding ingredients. Through the

opening in the lid you can gradually add ingredients.

• The base contains the motor. Because of it’s size, the

housing is very stable. The four feet on the

bottom of the base guarantee this stability.

• The switch regulates the speed of the mixer. The mixer

has 2 speeds and a ice crush button.

- Position 0 = off.

- Position 1= the lowest speed.

- Position 2 = the highest speed.

The controls are on the front of the mixer.

• The mixer can crush ice cubes with the ice crush

position. This means that the mixer is only activated

when you push the button P. As soon as you let go of

the button the mixer will be deactivated.

2 | BEFORE FIRST USE

Before plugging into a socket, check that the voltage in

your home corresponds with the voltage printed on the

bottom of the appliance.

1. Place the mixer on a at, clean and dry surface.

2. Make sure that the mixer is not activated.

3. Place the ingredients in the jug and lock it with the

lid.

4. Activate the mixer by choosing a speed setting.

Attention: Do not activate the mixer constantly, this

can cause engine problems. Do not use the mixer for

more then 1 minute continuously, wait 1 minute

before you operate it again.

5. When the mixer has nished mixing, blending or

crushing set the speed button to position 0 and wait

until the knives have stopped turning

, before you

remove the jug.

• When the glass jug is cracked or chipped, do not use

the mixer anymore.

This could lead to damage while using the mixer.

• To avoid splashes always place the lid on the jug.

• Always add liquid ingredients before adding solid

ingredients in the mixer.

• The mixer mixes best when you do not add pieces

which are too large.

• Always add a cup of liquids when you crush ice cubes.

• To add ingredients while the mixer is activated, take

the cap out of the lid and add the ingredients through

the opening.

• When the ingredients stick to the sides of the jug or

are not mixed properly, shut off the engine: wait until

the knives have stopped turning and push the

ingredients with a spatula towards the knives.

• To prevent the ingredients from being blend to small,

take into account that the mixer mixes in seconds, not

minutes!

• Working with warm ingredients can cause a build-up of

pressure in the jug and that can cause hot liquids to

escape when you take the lid of the jug. Therefore

always remove the cap from the lid when you are

processing warm ingredients.

3 | USING THE MIXER

17

4 | TIPS

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Inventum NB861 Blender. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Inventum. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Inventum NB861 Blender in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Inventum Blenders
Meer handleidingen voor Blenders

Veelgestelde vragen over Inventum NB861 Blender

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Inventum NB500R Blender

Handleiding

Inventum NB600R Blender

Handleiding

Inventum NB435B Blender

Handleiding

Inventum NB860 Blender

Handleiding

Inventum NB800 Blender

Handleiding

Inventum MB34 Blender

Handleiding

Inventum NB450B Blender

Handleiding

Inventum NB65 Blender

Gerelateerde categorieën