Handleiding Iwata EXF-38T Ventilator

Handleiding

APPLICATION

Compared with traditional axial fan,EXF series axial fan has large air

volume, low noise, energy saving and convenient to be used. Shutters

can be opened and closed to achieve dust-proof, waterproof and clean

appearance.It can blow or exhaust air .It can transport gas which doesn't

contain flammable, explosive, corrosive and viscous substances .Its gas

temperature is not more than 40

and gas dust and particulate matter

in the body not exceeding 150 mg/m . W

idely used in factories,

warehouses and other places where easy to produce exhaust gas, heat

air and poor ventilation need to be cooled or ventilated.

Schematic diagram for adjust ing belt tension:

INSTALLATION

1. Before installation, check whether the fan is damaged and deformed due to

packing and transportation.

2. During installation , make sure the connection parts are well fixed and

clearance between blade and housing should be uniform and no collision.

3. When installing the fan in the wall, don't install the unit completely inside.

The part measuring from the shutter to the body as 140 mm is the

maintenance positi

on of the fan shutter linkage system, and this part can not

be installed in the wall.

4. The fan must be installed in a horizontal position. Eight m8 riveting nuts

on the body must be used to fix.

5. This fan is not allowed to be hoisted directly and hoisting need to add

hanger or support for horizontal installation.

6. Voltage fluctuation does not exceed rated voltage 5.

7. The motor wiring must be carried out by professionals to ensure the correct

and safe wiring.

8. The default us

e state of the fan is to connect the pipe or equipment in front

or back .When the inlet (outlet) does not connect the pipe, the personnel may

directly contact the inlet and outlet. It needs to add safety protection device

and the user can contact the manufacturer to purchase additional protective

device.

9. After the fan is installed, the fan surface should be kept clean, and the fan

should be protected before formal use to prevent subsequent construction

from polluting the fan

surface. Many pollutants in the wet environment will

form an accelerated corrosion on the surface of the fan.

10

. All fan design is in principle non-rainproof design,

Outdoor use needs to add rainproof facilities or special

custom fan. Under the condition of seaside use, ordinary

fan can not meet the requirements of anti-corrosion

and needs special customization.

Use and Maintenanc

e

1. Test the machine before formal use

and con firm t he following items:

a

! correct connec

tion .

b

!

no ab normal noise.

c

!

power is not o verloaded.

d

! fan rotation is consistent with marking.

2. Make sure the machine test i s normal before it can be formally used.

3. When bei ng used as indoor exhaust, doors and windows can not be closed,

there should be enough air for its discharge, otherwise it is easy to cause motor

burning.

4. Don't start and stop the fan too often.

5. Shall regularly check the parts of the f an to ensure that the fan can start and

run normally at any time.

6.

In order to avoid the damage caused by the blade vibration due the damage of

dynamic balance, the fan blade must be checked every month regularly. If dust

and oil are found on the surface of t he blade, it must be cleaned before use.

7. If the fan is not in use for a long time, check that the connecting parts are

reliable and can be used normally after trial operation.

M8 adjusting bolt

- 2-

- 1-

M8

Rivet Nut

Shutter

Direction

PROPELLER FAN

(Belt Driven)

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Iwata EXF-38T Ventilator. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Iwata. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Iwata EXF-38T Ventilator in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Iwata Ventilatoren
Meer handleidingen voor Ventilatoren

Veelgestelde vragen over Iwata EXF-38T Ventilator

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Iwata AIRCOOL-Z20 Ventilator

Handleiding

Iwata AIRBLASTER-13R Ventilator

Handleiding

Iwata UVJET-M20R Ventilator

Handleiding

Iwata KLF-07B Ventilator

Handleiding

Iwata AIRBLASTER-21 Ventilator

Handleiding

Iwata TORNADO 30R-NV Ventilator

Handleiding

Iwata TURBO AIR 75R Ventilator

Handleiding

Iwata JET-1000D Ventilator

Gerelateerde categorieën