Handleiding JVC GM-P420PCE Plasma monitor

Handleiding

GM-P420PCE

GM-P421PCE

GM-P420E

1-6

No.51953

10

Precautions

• Before making connections, turn off all the equipment.

• Plugs should be firmly inserted; poor connection could cause noise.

• To unplug a cord, be sure to grasp its plug and pull it out.

• Connect the power cord after having finished all other connections.

• Refer also to the user manual of each piece of equipment.

Available Signals

Video signals

The following signals can be input to this Monitor:

• VIDEO A and VIDEO B terminals accept — PAL, PAL60, NTSC, NTSC4.43, and SECAM signals.

• COMPONENT/RGB B terminals accept — 480i, 576i, 480p, 720p, and 1080i (1035i) signals. (You need to set “RGB/COMPO.”

to “COMPO.” on the menu (see page 23).

(For GM-P420PCE and GM-P421PCE, to input the above signals, you need to install the video input unit (IF-C422P1G), which is

separately purchased.)

Computer signals (Preset)

This Monitor has 13 preset video modes for the most popular industrial standard, and the signals of the following image

resolutions can be input to the RGB input terminals.

1 PC98 640 400 24.8 56.4 Non-interlace

2 VGA400-70 640 400 31.5 70.1 Non-interlace

3 VGA480-60 640 480 31.5 59.9 Non-interlace

4 VGA480-72 640 480 37.9 72.8 Non-interlace

5 VGA480-75 640 480 37.5 75.0 Non-interlace

6 MAC13” 640 480 35.0 66.7 Non-interlace

7 SVGA-56 800 600 35.2 56.3 Non-interlace

8 SVGA-60 800 600 37.9 60.3 Non-interlace

9 SVGA-72 800 600 48.1 72.2 Non-interlace

10 XGA-60 1024 768 48.4 60.0 Non-interlace

11 XGA-70 1024 768 56.5 70.1 Non-interlace

12 RGB15K-60 — — 15.7 59.9 Interlace

13 RGB15K-50 — — 15.6 50.0 Interlace

Notes:

• When a signal other than listed above is input, a part of the screen may become void or an unnecessary picture may appear.

• Signals, though they are within the acceptable range of frequencies, may not be displayed normally, depending on the signal

type.

• Depending on the connected equipment, the Monitor may not be compatible with composite sync (Cs) or G on sync signals.

• When a preset mode signal is input, the vertical frequency displayed on the screen will have an “*” shown at its right top

position.

• When No. 7 to No. 11 signals are input, lines will become thin if their signal frequencies are higher than the screen resolution.

Connections

Screen resolution

Horizontal

Vertical

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

Signal name Scan systemNo.

9

ENGLISH

Installation

Precautions

• When mounting the Monitor vertically, consult your dealer. (See also page 13).

• When installing the Monitor, be sure to use a dedicated Stand Unit, Wall Mounting Unit, or Monitor Hanger Unit, depending

on a particular case. Ask your dealer for installation.

• When installing the Monitor, refer also to the user manual for each option to use. Do not tilt the Monitor rightward, leftward,

or backward.

• Route the power cord and connection cables along wall or floor corners to avoid walking on them.

• For good heat dissipation, try to leave the following distances of space (minimum) around the Monitor.

• The ambient temperature of the installation place should be within the range of 0˚C to 40˚C.

• When installing the Monitor in a place, such as near the ceiling, the remote control may not work correctly because of possible

effects from the surroundings. If this happens, use the remote control as a wired remote control or move the Monitor where it

is free from these effects.

When installing the Monitor on a stand

When mounting the Monitor on the wall

Notes:

• Do not allow the same image (pattern) to be continuously displayed on the screen for a long time; otherwise, the area on the

screen corresponding to the image may vary in brightness, leaving an afterimage on the screen. To reduce the afterimage, you

can use the Refresh function (see page 28).

• The Monitor is manufactured using very high-precision technology, allowing for more than 99.99% active pixels, however, be

aware that only a slight number of pixels may be deficient or lit at all times.

• Do not install the Monitor in such a way that the Monitor and other AV equipment affect each other adversely. (For example,

if a disturbed image or noise due to electromagnetic interference occurs, or if the infrared remote control malfunctions, change

the installation place.)

Front View

50

200

MENUINPUT POWER

100

100

100

Side View

Unit: mm

50

200

When hanging the Monitor from the ceiling

Side View

Take measures against the Monitor from overturning:

To protect against abnormal events such as earthquakes and to prevent unexpected accidents, take appropriate measures

for preventing the Monitor from overturning; should it overturn, this could lead to personal injury.

For detailed information, refer to the manual supplied for the stand.

Wall

Unit: mm

Unit: mm

200

150

50

50

MENUINPUT POWER

150

Front View

Side View

Downloaded from www.Manualslib.com manuals search engine

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je JVC GM-P420PCE Plasma monitor. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met JVC. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van JVC GM-P420PCE Plasma monitor in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor JVC Plasma monitoren
Meer handleidingen voor Plasma monitoren

Veelgestelde vragen over JVC GM-P420PCE Plasma monitor

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

JVC GM-P421PCE Plasma monitor

Handleiding

JVC GM-P420E Plasma monitor

Handleiding

LG MT-42PZ12 Plasma monitor

Handleiding

LG MZ-42PM10 Plasma monitor

Handleiding

LG MZ-42PZ14 Plasma monitor

Handleiding

LG MZ-42PZ24 Plasma monitor

Handleiding

LG MT-60PZ12V Plasma monitor

Handleiding

Sanyo PDP-42H1EN Plasma monitor

Gerelateerde categorieën