Handleiding Logik L17KBS10 Waterkoker

Handleiding

GB-1 GB-2

GB-3

PRODUCT OVERVIEW

UNPACKING

Remove all packaging from the kettle. Retain the packaging. If you dispose

of it please do so according to local regulations.

The following items are included:

FIRST TIME USE

Clean your kettle by boiling a full kettle of water twice and then discarding

the water.

KEEPING THE MAINS CABLE TIDY

Extend the mains cable in the kettle stand to

the required length. Locate the mains cable

in one of the slots in the stand. For safety it

is recommended that the length of exposed

mains cable is kept as short as possible.

Place the kettle stand on a rm level surface

and plug in the mains plug at a standard

mains socket (240 Volt 13 Amp rated).

Instruction Manual

(Part number: L17KBS10-001)

The kettle

If items are missing or damaged, please contact Partmaster (UK only)

Tel. 0844 800 3456 for assistance.

This kettle must only be used with the stand provided.

DESCALING THE KETTLE

Depending on the hardness of the water

in your area, limescale may be deposited

on the heating element and the inside of

the kettle. This normal build-up is not

harmful to health but an excessive

amount of scale may aect the

performance of the kettle.

To descale, ll the kettle with distilled

water up to three-quarters of the Max

level and bring the water to boil. After the

kettle has switched o, add a descaling

solution following the manufacturers

instructions. Never attempt to descale the

kettle by chipping or scraping with a

sharp implement.

CLEANING THE KETTLE

The kettle exterior should be cleaned with a soft damp cloth. Do not use

abrasive cleaners or scouring pads which may damage the nish of the kettle.

Never immerse the kettle or kettle stand in water and always keep the electrical

contacts dry. Disconnect from the mains before cleaning the kettle stand.

CLEANING THE REMOVABLE SCALE FILTER

To prevent loose particles of limescale being poured into your beverage, your

kettle is tted with a scale lter. You may remove the lter and t it back in

after cleaning.

FILLING THE KETTLE

Slide the switch to open the lid and ll the kettle with the required amount of

water.

Do not exceed the maximum ll level (Max 1.7L) as indicated inside the kettle

and not less than the minimum ll level (Min 0.5L).

Do not insert any foreign objects or allow any liquid to spill into the Power

Connector Hole.

WHEN THE WATER HAS BOILED

The kettle will automatically switch o . The

light inside the kettle will go o.

Ensure that the switch is not

obstructed and the lid is rmly closed.

The kettle will not turn o if the

switch is obstructed or if the lid is

open.

If there is insucient water in the kettle, the automatic safety cut-out

will operate. If this happens, allow the kettle to cool for ten minutes before

relling with cold water and re-boiling.

If the kettle is overlled, boiling water may be ejected from the spout and

cause scalding.

After removing the kettle, there may be some water on the surface of the

stand. This is condensation from the steam that causes the kettle to

automatically switch o after boiling. This is normal and should not be a

cause for alarm.

Never open the lid while the water is

boiling. The steam coming out from

the kettle is very hot.

SWITCHING ON

Place the kettle on the stand and press the

power switch downward. The light inside

the kettle will illuminate to indicate that the

kettle is heating. This is visible through the

glass lid.

Stand

Spout

Lid

Fill Level

Power Switch

Open Button

Handle

Power Connector Hole

To remove the lter, open the lid,

press and lift up the lter from the

bracket at the spout.

To t in the lter, open the lid, place

the lter inside the bracket at the

spout, locate the 3 slots shown by the

arrows above and t it in place.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Logik L17KBS10 Waterkoker. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Logik. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Logik L17KBS10 Waterkoker in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Logik Waterkokers
Meer handleidingen voor Waterkokers

Veelgestelde vragen over Logik L17KBS10 Waterkoker

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Logik L17JKB12 Waterkoker

Handleiding

Logik L17PKG23 Waterkoker

Handleiding

Logik L17JKB10 Waterkoker

Handleiding

Logik L17PKB20E Waterkoker

Handleiding

Logik L17SKBU21 Waterkoker

Handleiding

Logik L17KBSS11 Waterkoker

Handleiding

Logik L17PKGS21 Waterkoker

Handleiding

Logik L17PKBS21 Waterkoker

Gerelateerde categorieën