Handleiding Logik L200IR17 Strijkijzer

Handleiding

SWITCHING OFF THE IRON

To prevent water leakage, set to the far

side of the Steam Control to prevent water

leakage from the soleplate.

When switching off the iron, set the Steam

Control to

, also turn the Temperature

Dial to 0 position, then unplug the iron from

the mains socket.

FILLING THE IRON

Make sure the iron is unplugged from the mains socket and

the Steam Control is at the

position.

Open the Water Cap, tip the iron up slightly and fill it

carefully with fresh water using the supplied filler cup.

If you live in a hard water area, it is advisable to use distilled

or de-mineralised water. Avoid using water containing

softeners, perfumes or additives.

OPERATION

• Ensure the iron is unplugged and the Steam Control is

at the

position.

• Fill the iron with water as described above.

• Place the iron on its heel on the ironing board rest and

connect the mains cable to the mains socket.

• The Temperature Indicator will illuminate.

• Select the correct temperature by turning the

Temperature Dial.

Turn anticlockwise to increase and clockwise to reduce

temperature.

STEAM IRONING

Steam ironing should be carried out at the highest settings on the

Temperature Dial. Steam ironing at lower temperatures may cause

water to leak from the soleplate.

The quantity of steam is regulated by the Steam

Control. Move the Steam Control to a suitable

position depending on the quantity of steam required

and the ironing temperature.

UNPACKING

Remove all items from the packaging. Retain the packaging. If you dispose of it

please do so according to any local regulations. The following items are included:

• Steam Iron

• Filler Cup

• Instruction Manual

If items are missing or damaged, please contact Partmaster (UK only).

Tel: 0344 800 3456 for assistance.

FIRST TIME USE

Inspect the iron carefully.

Check that the voltage marked on the rating matches your mains voltage.

Remove any protective film from the soleplate. Polish the soleplate lightly with a

clean soft cloth to remove any residues.

Place the iron on the ironing board or a flat rigid surface.

PRODUCT OVERVIEW

IRONING TEMPERATURES

Check the ironing instructions attached to the item (they are on a label showing a

symbol of an iron). Always follow these ironing instructions. The indications on the

iron’s Temperature Dial and the table below will help you.

GARMENT LABEL FABRIC TYPE THERMOSTAT REGULATION

Synthetic Low Temperature

Silk-wool Medium Temperature

Cotten-linen High Temperature

Fabric not to be ironed

If there are no ironing instructions but you know the fabric, then use the table

above. The table is valid only for the actual materials and does not take into account

any finish applied to the fabric. Textiles to which a finish has been applied (wrinkle

relief, printed T shirts etc.) should be ironed at a lower temperature.

If the fabric contains mixed fibres, select the lowest ironing temperature of the

composition, e.g. iron a 60% polyester / 40% cotton mix at the temperature

indicated for polyester.

The iron heats up quicker than it cools down. Sort fabrics to be ironed into groups

according to temperature: wool with wool, cotton with cotton, etc. Start by ironing

articles requiring low temperature settings and progress to higher ones.

SAFETY FIRST!

Please follow all the safety precautions listed below for safety and to reduce the risk of

injury or electrical shock.

Caution, hot surface

Surfaces are liable to get hot during use.

• Read all the instructions before operating the appliance and keep them for future

reference. If you pass the product on to a third party, include these instructions.

• Unplug the iron from the mains socket when not in use, and before emptying, lling,

or cleaning.

• Do not touch the soleplate of the iron if it is hot.

• Always hold the appliance by the handle.

• Keep the appliance well away from surfaces and objects that can be damaged by heat.

• Ensure there is adequate room to operate the iron.

• Ensure that the iron cannot fall into water.

• Do not immerse the mains cable in any liquid.

• Do not let the mains cable overhang the edge of the work surface or allow it to touch

hot surfaces or sources of heat or ame.

• If any part of this appliance is damaged or malfunctions in any way, or the mains

cable or mains plug is broken, do not continue to use it. Seek expert assistance.

• The iron must not be used if dropped, if there are visible signs of damage or if it is

leaking. If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualied persons in order to avoid a hazard.

• This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved. Children shall not play

with the appliance. Cleaning and user maintenance shall not be made by children

without supervision.

• Keep the appliance and its cord out of reach of children less than 8 years old.

• Children should be supervised to ensure that they do not play with the appliance.

• Parents must warn children not to touch hot appliance parts. Close supervision is

necessary when an appliance is used near children.

• When not ironing never leave the iron face down. Stand it upright on its heel, on a

level heatproof surface.

• The iron must be used and rested on a stable surface.

• When standing the iron in an upright position ensure that the surface is at and stable.

• Do not use outdoors or in damp or wet conditions.

• Do not use this iron for professional laundry services.

• Do not use this appliance for any purpose not covered by the instructions.

• Do not turn the iron upside down, there may be hot water in the water tank.

• Use this iron only with a purpose-built ironing board.

• Observe all ironing instructions and ironing temperature dot settings given by the

garment manufacturer. These are normally on a label or labels inside the garment.

• The iron must not be left unattended while it is connected to the mains socket.

• Always ensure the water lling does not exceed the max mark.

• The plug must be removed from the socket-outlet before the water tank is lled

with water.

• Make sure the unit is earthed properly during use. Do not use the iron with any

extension sockets. If in doubt, contact a qualied electrician.

200ml

150ml

100ml

50ml

Temperature Dial

Self Clean

Steam Control

Water Filler & Cap

Spray Nozzle

Spray Button

Shot of Steam

Button

Temperature

Indicator

Water

Tank

Soleplate

Filler Cup

Mains Cable

Pure (100%) wool fabrics may be pressed with the iron set to a steam position and

the garment protected by a dry cloth.

Do not iron garments that are dirty or stained. The iron’s heat may set the stain.

• Some parts have been lightly greased and the iron might smoke slightly when

switched on for the first time. After a short while, this will cease. We recommend

passing the iron over a clean cotton cloth before using it for the first time. The

Temperature Indicator will go off when the indicated setting reaches the correct

temperature. The iron is now ready for use. During use the indicator will cycle on

and off as the thermostat maintains the iron at the correct temperature setting.

• In between operations and when filling the iron always stand the iron on its

heel. NEVER leave the iron face down.

Maintaining the finish of the iron’s soleplate is essential. Keep the soleplate

smooth: do not scratch it on metal objects (e.g. the edge of the ironing board,

buttons, zippers, etc.) as these may impair performance.

The iron gives off steam continuously only if you hold the iron horizontally. You

can stop the continuous steam by placing the iron in a vertical position or by

moving the

Steam Control to the position.

Set to the

position

Do not fill the iron above the max mark indicated on

the side of the iron.

0

DECREASEINCREASE

MAX SteamMIN SteamDry Ironing

L200IR17_IB_RC_191011_grace.indd 2 11/10/2019 2:14 PM

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Logik L200IR17 Strijkijzer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Logik. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Logik L200IR17 Strijkijzer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Logik Strijkijzers
Meer handleidingen voor Strijkijzers

Beoordeling

Veelgestelde vragen over Logik L200IR17 Strijkijzer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Logik L200IR17E Strijkijzer

Handleiding

Logik L200IR12 Strijkijzer

Handleiding

Logik L220IR20 Strijkijzer

Handleiding

Logik L120IR21E Strijkijzer

Handleiding

Logik L220IR20E Strijkijzer

Handleiding

Logik L200IR11E Strijkijzer

Handleiding

Tefal GV9224G0 Pro Express Protect Strijkijzer

Handleiding

Orbegozo SV 1600 A Strijkijzer

Gerelateerde categorieën