l
Battery life indicator
• When the battery nears its end, the small
second hand moves at two-second intervals
instead of normal one-second intervals. In
that case, have the battery replaced with a
new one as soon as possible.
• The watch remains accurate, however, while
the small second hand is moving at two-
second intervals.
Stopwatch operation
Start Stop Reset
* Restart and stop of the stopwatch can
be repeated by pressing Button A.
Start
* Measurement and release of split time can
be repeated by pressing Button B.
Standard measurement
A
Accumulated elapsed time measurement
Split time measurement
Split
Split
Release
Stop
Start Stop Restart Stop R e s e t
Reset
n
L U M I B R I T E WAT C H
v If your watch is a LORUS LUMIBRITE watch, it
has following features.
LORUS LUMIBRITE watches absorb and store
light energy from natural and artificial light
sources and emit light in the dark. They are
made of environmentally friendly material, and
therefore, are harmless to human beings and
the environment.
• With a full charge, LORUS LUMIBRITE watches
glow in the dark hours longer than conven-
tional luminous watches of this type. If ex-
posed to a light of more than 500 lux (i.e., the
brightness of a typical office) for approximate-
ly 10 minutes, or direct sunlight for 2 minutes,
they will glow for hours.
• Since LORUS LUMIBRITE watches emit the
light they store, the brightness will decrease
gradually over time. The length of time they
will glow may also differ slightly depending on
such factors as the brightness of and distance
from the light source used to charge the
watch.
n
B ATT E RY C HA NG E
The b a ttery S E IKO SR92 0 SW, whic h powers
your watch, should last approximately 2 years.
However, because it is inserted at the factory, the
actual life of the battery once in your possession
may be less than the specified period.
Be sure to replace the battery to prevent any
possible malfunction as soon as it runs down. To
replace the battery, we recommend taking the
watch to a local watch repair shop.
Note:
1. If the stopwatch is used for more than 2 hours
a day, the battery life may be less than the
specified period.
2. After the battery is replaced with a new
one, set the time/calendar and adjust the
stopwatch hand position.
n
C A R E O F Y O U R L O R U S WAT C H
• BATTERY
CAUTION
Do not expose the old battery to fire or
recharge it. Keep it at a place beyond
the reach of children. If a child swallows
it, consult a doctor immediately.
• WATER RESISTANT
* If your watch is 200 M/20 BAR, 100 M/10 BAR
or 50 M/5 BAR water resistant, it is so indicated
on the dial/case back.
• Do not press or turn the crown when the watch
is wet.
• If the watch is exposed to salt water, rinse it in
fresh water and then wipe it thoroughly dry.
Caution:
Leather straps are not water resistant except
so indicated, even if the watch head is water
resistant.
• ALLERGIC REACTION
Because the case and band touch the skin
directly, it is important to clean them regularly. If
not, shirt sleeves may be stained and those with
delicate skin may develop a rash. Please wear
the watch with some play to avoid any possible
allergic reaction. If you develop a rash on your
wrist, stop wearing and consult a physician.
• MAGNETISM
Your watch will be adversely affected by strong
magnetism.Keep it away from close contact with
magnetic objects.
• SHOCKS AND VIBRATIONS
Your watch may be worn for nor mal sports
activities, However, be careful not to drop it or
hit it on hard surfaces.
• TEMPERATURE
Your watch is preadjusted so that constant
a c c u r a c y m a y b e i n s u r e d a t n o r m a l
temperature.
n
S E R V I C E
When you r LORU S watch requires repair or
sevicing, please see the enclosed WARRANTY/
GUARANTEE.
Pr in te d in C h i n a
l
Necessary procedure after battery change
After the battery is replaced with a new one,
or in case any of the hands should move
improperly, follow the procedure below to reset
the STOPWATCH hands to the “0” position.
1. Pull out the crown to the second click.
2. Press and hold Button A and B simultaneously
for 2 seconds or longer.
* The STOPWATCH second hand turns counter
clockwise, and then returns to where it was.
3. Press Button A or B to reset the STOPWATCH
s e c o n d an d mi n u t e h a n d s t o th e “0 ”
position.
Button A: The hands move counterclockwise.
Button B:
The hands move clockwise.
4. Turn the crown to set the time.
5. P u s h the crown back in to th e nor ma l
position.
* The STOPWATCH minute hand moves
correspondingly with the STOPWATCH
second hand.
* The STOPWATCH hands move quickly if the
respective buttons are kept pressed.
Praat mee over dit product
Laat hier weten wat jij vindt van de Lorus VD53 Uurwerk. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.