Handleiding Lorus Z024 Uurwerk

Handleiding

1. From the normal time mode, press S3 button 4

times to enter the second time zone mode.

2. Press S2 button to start the setting procedure.

The hour digits start flashing.

3. To adjust the value, press S1 button (+1 hour).

4. Press S3 button once to move on to the minute

setting.

5. To adjust the value, press S1 button (+30 minutes

or -30 minutes).

6. Press S2 button to confirm the setting.

7. Press S3 button to return to the normal time mode.

MINUTE SETTING BY PRESSING S1

(+30 MINUTES)

HOUR SETTING BY

PRESSING S1 (+1 HOUR)

SECOND TIME ZONE

NORMAL TIME

PRESS S3

4 TIMES

NORMAL TIME

PRESS S3

2 TIMES

ALARM MODE

HOUR SETTING BY

PRESSING S1

MINUTE SETTNG BY

PRESSING S1

TIME ZONE SETTING

BY PRESSING S1

S3

S2

S3

■

HOW TO SET ALARM TIME

1. You can set alarm with hours and minutes. When

the alarm is on, the alarm (BI-BI) sounds for 20

seconds at the preset time. Press S1, S2 or S3

button to stop the alarm after it starts sound.

Alarm is available in one time zone only (T1 or

T2).

2. From the normal time mode, press S3 button 2

times to enter the alarm mode.

3. To change the alarm setting, press S2 button. The

hour digits start flashing. To adjust the value, press

S1 button.

4. To move on to the minute setting, press S3 button.

To adjust the value, press S1 button.

5. To set the time zone, press S3 button. “AL. T1” or

“AL. T2” will flash. Select the time zone by pressing

S1 button.

■

HOW TO SET SECOND ZONE TIME

S2

S3

S3

S2

S3

S2

■

HOW TO USE TIMER

indicated hourly chime is on

indicated alarm is on

TO SET THE COUNTDOWN TIMER

1. From the normal time mode, press S3 button 3

times to enter the timer mode.

2. While in the timer mode, press S2 button. The hour

digit starts to flash.

3. Press S3 button to change the selection of setting.

4. Press S1 button to adjust the value. Holding S1

button down can fasten the process.

5. After you set the countdown time, press S2 button

to return to the timer mode.

■

ALARM & CHIME ON/OFF

PRESS S3

2 TIMES

NORMAL TIME

ALARM

From the normal time mode, press S3 button 2

times to enter the alarm mode.

Press S1 button to turn on or off the ALARM and

HOURLY CHIME signals.

■

HOW TO USE EL BACKLIGHT

In any mode press S4 button to illuminate the

display for about 3 seconds.

Note:

1. The backlight of the watch employs an electro-

luminescent (EL) light, which tends to lose

illuminating power after very long use.

2. The illumination provided by backlight may be

hard to see when viewed under direct sunlight.

S1

S1

S1

S1

S3

NORMAL TIME

TIMER

PRESS S3

3 TIMES

HOUR SETTING BY

PRESSING S1

MINUTE SETTING BY

PRESSING S1

S3

TO USE THE COUNTDOWN TIMER

1. Press S1 button while in the timer mode to start

the countdown timer.

2. Press S1 button again to stop the countdown

timer.

3. While in the timer mode, press S2 button to reset

the countdown time to its starting value and to

start to countdown automatically or while in the

timer mode, press S2 button and then press S1

button to reset the countdown time.

4. From 3 minutes prior to the expiry time, the alarm

(BI BI) beeps each time when the second digits

reach “0” or “30”.

5. Within 10 seconds to the expiry time, the alarm

(BI) beeps per second.

6. When the timer expires, the alarm (BI-BI-BI) beeps

for 10 seconds. It may be silenced by pressing S1,

S2 or S3 button.

SECOND SETTING BY

PRESSING S1

S3

SETTING IS COMPLETED

TIMER HAS EXPIRED

BEGIN COUNT DOWN

RELOAD

TIMER AND

SET

S2

S2

S1

S3

S2

S2

The batteries which power your watch should last

approximately 2 years. However, because they

are inserted at the factory, the actual life of the

batteries once in your possession may be less than

2 years.

Be sure to replace the batteries to prevent any

possible malfunction as soon as they run down. To

replace the batteries, we recommend taking the

watch to a local watch repair shop.

Note: If the alarm is used for more than 20

seconds a day, the hourly time signal more

than 24 times a day, the stopwatch more

than once a day and/or the illuminating

light for more than 1 second a day, the

battery life may be less than the specified

period.

■

BATTERY CHANGE

Printed in China

CAUTION

S1

to stop

This watch contains precise electronic

components. Never attempt to open the case or

remove the back cover.

• BATTERY

Do n ot expose the old batter y to fire or

recharge it. Keep it at a place beyond the

reach of chil dren. If a child swallows it, consult

a doctor immediately.

• WATER RESISTANT

Condition

of use

Accidental

contact

with water,

such as

splashes

and rain

Swimming

and taking

a shower

Skin

diving

Scuba

diving

Indication

on the dial/

case back

No

Indication

* If your watch is 200 M/20 BAR, 100 M/10 BAR or

50 M/5 BAR water resistant, it is so indicated on

the dial/case back.

• Do not operate the buttons when the watch is wet.

• If the watch is exposed to salt water, rinse it in

fresh water and then wipe it thoroughly dry.

• Should you find any water or condensation inside

the watch, immediately have it checked. Water

can corrode electric parts inside the case.

NO NO NO

YES YES NO NO

YES YES NO

NO

NO

NO

YES

WATER

RESISTANT

WATER

RESISTANT

(50M/5 BAR

)

WATER

RESISTANT

100M/10 BAR

or above

(

NO

Caution:

Leather straps are not water resistant except

so indicated, even if the watch head is water

resistant.

• ALLERGIC REACTION

Because the case and band touch the skin

directly, it is important to clean them regularly. If

not, shirt sleeves may be stained and those with

delicate skin may develop a rash. Please wear

the watch with some play to avoid any possible

allergic reaction. If you develop a rash on your

wrist, stop wearing and consult a physician.

• MAGNETISM

Your watch will be adversely affected by strong

magnetism. Keep it away from close contact with

magnetic objects.

• SHOCKS AND VIBRATIONS

Your watch may be worn for normal sports

activities, but be careful not to drop it or hit it on

hard surfaces.

• TEMPERATURE

Your watch is preadjusted so that constant

accuracy may be insured at normal tem pera ture.

• CLEANING

Use only a soft cloth and clean water for

cleaning your watch. Never use chemicals, as the

waterproof gasket will corrode.

YES

■

CARE OF YOUR LORUS WATCH

■

SERVICE

When your LORUS watch requires repair or

servicing, please see the enclosed WARRANTY/

GUARANTEE.

(

LORUSNREZ022C.indd2 2016/12/0915:09

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Lorus Z024 Uurwerk. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Lorus. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Lorus Z024 Uurwerk in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Lorus Uurwerken
Meer handleidingen voor Uurwerken

Veelgestelde vragen over Lorus Z024 Uurwerk

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Lorus VX42 Uurwerk

Handleiding

Lorus Y676 Uurwerk

Handleiding

Lorus W130 Uurwerk

Handleiding

Lorus W151 Uurwerk

Handleiding

Lorus W121 Uurwerk

Handleiding

Lorus YK36 Uurwerk

Handleiding

Lorus VD78 Uurwerk

Handleiding

Lorus Z001 Uurwerk

Gerelateerde categorieën