Handleiding Lucasey LC200WP Muurbeugel

Handleiding

T#1794

LC200WP

200mm VESA® Plate

LC200WP Wall Plate

Lag Screws

Flanged Socket Head Screw

Wall Mount for Flat Panel Screens up to 50lbs

with up to 200mm VESA® Mounting Patterns

Nylock Nut

Flat Washer

Belleville Washer

5/16-18 x 1-7/8" Flanged SHC Screw ... 1 1/4" Belleville Washer ... 4

5/16-18 x 2" Button Head Screw ... 1 5/16" Belleville Washer ... 5

1/4-20 x 2" Button Head Screw ... 1 5/16" Flat Washer ... 2

1/4-20 Nylock Nut ... 1 5/16-18 Nylock Nut ... 2

1/4" Flat Washer ... 2

1. Remove the Flanged Socket Head Screw from the LC200WP Wall

Plate. Keep the Washers and Nuts oriented the same for re-assembly.

2. Find a wood stud in the wall. Determine the best possible viewing

location for the monitor. Making sure the LC200WP Wall Plate is level,

use it as a template to mark and drill three 1/8" pilot holes, 2-3/4" deep.

3. Attach the LC200WP Wall Plate to the wall using the provided Lag

Screws.

4. Attach the 200mm VESA® Plate to the Monitor using hardware specified

by the monitor manufacturer. Additional washers and setscrews have

been provided when additional spacers are needed between the monitor

and the 200mm VESA® Plate.

5. Attach the LC200WP Wall Arm with attached monitor to the LC200WP

Wall Plate with the hardware removed in step 1.

6. Check the mount for stability and make sure all the fasteners are

secure.

7. Adjust the tension on the swivel and tilt to keep the monitor in

the desired viewing position.

8. If the screen is not level, loosen the Monitor Attaching Screws, adjust

the monitor and re-tighten the screws.

Determine which type of monitor attaching hardware is required for the

monitor as specified by the monitor manufacturer. Various sizes of monitor

attaching screws are provided for convenience (See the Hardware List below)

Wood Lag Screws are provided for wood stud installations. For concrete or

metal sutds, use the WMAAB3, concrete anchor bolt kit, or WMATB3, toggler

bolt kit, and follow the instructions specific to these fasteners.

Monitor Not Included

Monitor Attaching Screws

#14 x 2-1/2" HWH Lag Screw ... 3 6mm x 12mm Phillips Screws ... 6

4mm x 25mm Set Screws ... 6 4mm Hex Nuts ... 12

5mm x 30mm Set Screws ... 6 5mm Hex Nuts ... 12

6mm x 30mm Set Screws ... 6 6mm Hex Nuts ... 12

4mm x 12mm Phillips Screws ... 6 5mm Flat Washers ... 36

5mm x 12mm Phillips Screws ... 6 1/4" Flat Washers ... 18

Assembly Hardware

Hardware Kit

Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677

DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1

LC200WP INSTALLATION INSTRUCTIONS

lc200wp_ins (3/11) ©2011 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Lucasey LC200WP Muurbeugel. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Lucasey. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Lucasey LC200WP Muurbeugel in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Lucasey Muurbeugels
Meer handleidingen voor Muurbeugels

Veelgestelde vragen over Lucasey LC200WP Muurbeugel

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.