If you have any questions, please contact one of us below:
Tel: 909-230-6888 ext 125
Tel: +86-755-6682-0980 ext 103
MCUPGRAVITY US manual
4页弹簧折，再对折
1
300.0 mm
180.0 mm
6. When the cradle grips open wide enough, lay your phone onto the
cradle back support.
7. Then lift up your phone just a little bit to retract and fully close both
grips in to hold your phone securely. You are ready to go.
8. If you have a large size phone(6.5-inch or longer), you may want to
extend the bottom support to accommodate it. Press the release
button while pulling down the bottom support to the desired length.
CAR CUP PHONE MOUNT WITH
GRAVITY HOLDER
User’s Guide
MCUPGRAVITY
www.macally.com
• Car Cup Phone Mount with Gravity Holder
• User’s Guide
Package Contents
Introduction
Macally Product Information
Macally Product Information
Warranty
Macally peripherals warrants that this product will be free from defects
in title, materials and manufacturing workmanship for one year from the
date of purchase. If the product is found to be defective then, as your sole
remedy and as the manufacturer’s only obligation, Macally will repair or
replace the product. This warranty shall not apply to products that have
been subject to abuse, misuse, abnormal electrical or environmental
conditions, or any condition other than what can be considered as normal
use.
Limitation of Liability
The liability of Macally Peripherals arising from this warranty and sale
shall be limited to a refund of the purchase price. In no event shall Macally
Peripherals be liable for costs of procurement of substitute products or
services, or for any lost profit, or for any consequential, incidental, direct
or indirect damages, however caused and on any theory of liability, arising
from this warranty and sale. These limitations shall apply not with standing
any failure of essential purpose of any limited remedy.
Copyright® 2019 by Macally Peripherals
21 3
65 7
Installing the MCUPGRAVITY Adjusting the MCUPGRAVITY
To change the viewing angle, simply hold and bend the flexible arm
to accommodate your viewing comfort. To change between vertical
view and horizontal view, simply hold and rotate the grip arms.
Hardware Basics
Expandible side grip
Cup mount base
Screw knob
Bendable
gooseneck
Flexible
mount
4
Thank you for purchasing the Macally product, Macally MCUPGRAVI-
TY is designed to allow one hand operation to mount your phone into a
car cup holder effortlessly. The cradle grips open between 2.36"(60 mm)
and 3.39"(86 mm) width to support a wide range of smartphones with or
without protection cases. Its expandable base can be released to fit into
various sizes of car cup holders.
Before you begin using this product, be sure to read this user’s guide in
its entirety.
Important safety note: DO NOT install or adjust the Macally
MCUPGRAVITY while driving. Please always park your car in a safe
location before doing any installation steps or adjustment.
1. Begin the installation by first turning the screw knob counter-clock-
wise and the Expandible Side Base will expand outward.
2. Place the MCUPGRAVITY base into your car’s cup holder.
3. Once you have placed MCUPGRAVITY into the car cup holder,
continue to turn the screw knob counter- clockwise to lock
MCUPGRAVITY securely in place.
4. Attach the holder to the neck base securely.
5. Place your phone on the cradle bottom support, push them
downward to open the cradle grips.
Technical Support
Please E-mail us at techsupport@macally.com, or call us at
1-909-230-6888 Monday to Friday,
8:30AM to 5:30PM, Pacific Standard Time
FAQ & help - https://help.macally.com/help
Manual and driver download -
https://us.macally.com/pages/drivers-and-download
Cradle grip
Cradle bottom support
/Cradle grip opener
Push button to
extend the
bottom support
Praat mee over dit product
Laat hier weten wat jij vindt van de Macally MCUPGRAVITY Telefoonhouder. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.