Magnus offers a spare or replacement quick-release plate for the VT-3000 tripod head. Having a quick-release
plate attached to the camera’s base at all times allows you to attach or remove the camera from the tripod
without having to waste time fumbling with the threaded mount. Your VT-3000 Tripod includes one quick-
release plate, but you may want to have spares for other cameras. The Magnus VT-QRP300 has a 1/4˝-20
mounting stud and a retractable register pin for correct camera positioning. The anti-skid mounting surface
stabilizes the camera.
Owner’s
Manual
Congratulations
on your
purchase
of the VT-3000
Video Tripod
by
Magnus.
All Magnus tripods are designed
to balance features professionals
want with the affordability they
need, yet be durable enough to
provide many years of trouble-free
service and enjoyment. Please
carefully read these instructions for
setting up and breaking down your
tripod.
ONE (1) YEAR LIMITED WARRANTY
Magnus provides a limited warranty that this product is free from defects in materials and workmanship to the original purchaser under normal use
for a period of one (1) years from the original purchase date Or thirty (30) days after replacement whichever occurs later. Magnus’ responsibility
with respect to this limited warranty shall be limited solely to repair or replacement, at its option, of any product which fails during normal consumer
use. This warranty does not extend to damage or failure which results from misuse, neglect, accident, alteration, abuse, improper installation or
maintenance. To obtain a replacement during the time of this warranty, please return the defective item with proof of purchase along with an RMA
number to the place of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
www.SupportsByMagnus.com
Video Tripod
VT-3000
Key Features
• 65 mm leveling ball
• Micro Balance Slider
• Bubble level for accurate setup
• Two-way fluid head for smooth motion
• Three-section legs break down to a compact
30.0˝ (76.2 cm)
• Passive counterbalance for stability
• Separate pan and tilt locks
• Left and right pan bar mounts
• Mid-level spreader for stability on uneven
surfaces
• Ground spikes for outdoor use and convenient
retractable rubber feet for delicate floor
surfaces
• Full 360° pan range
• Anodized aluminum construction
• 6.6 lb (3.0 kg) load capacity
• 61.0˝ (155 cm) to 28.6˝ (72.6 cm) height
range
• 31˝ (78 cm) folded length
• 7.75 lb (3.5 kg) weight
Safety Warnings
• Never set up or pull down a tripod while a
camera is mounted
• Do not move the tripod or adjust the legs
while a camera is mounted
• Do not exceed the maximum weight
capacity of the tripod
• Never leave a camera unattended on the
tripod
• The camera should be securely fastened
to the quick-release mounting plate before
mounting onto the tripod
• Never mount a camera to the tripod until all
tripod legs are locked and stabilized
• Do not stand on, rest on, or hang anything
from the mid-level spreader
• Do not attempt to remove the mid-level
spreader
• Do not lift or move the tripod by the head
• Keep hands clear of the inside of the legs, to
avoid trapping fingers
• The safe operation of the tripod is the
responsibility of the user
Video Tripod Components
Tilt/Pan
Bar
Universal ¼-20
Mounting Screw
Retractable
Ground Spikes
Mid-Level
Spreader
Ball Level
Locking Knob
Quick-Release
Mounting Plate
Bubble
Level
Mounting Plate
Capture Release
Tilt/Pan Bar
Mount
Mounting Plate
Locking Knob
Micro Balance
Slider
Pan Lock
Knob
Leg
Flip-Lock
Quick-Release Plate for VT-3000 Tripod
Tilt Lock
Knob
Praat mee over dit product
Laat hier weten wat jij vindt van de Magnus VT-3000 Statief. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.