Handleiding Makita DUC303 Kettingzaag

Handleiding

5 ENGLISH

12.

Cut wood only. Do not use chain saw for purposes

not intended.Forexample:donotusechainsawfor

cutting plastic, masonry or non-wood building materi-

als. Use of the chain saw for operations different than

intended could result in a hazardous situation.

13. Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the

guidebartouchesanobject,orwhenthewood

closes in and pinches the saw chain in the cut.

Tip contact in some cases may cause a sudden

reverse reaction, kicking the guide bar up and

back towards the operator. Pinching the saw chain

along the top of the guide bar may push the guide

barrapidlybacktowardstheoperator.Eitherof

these reactions may cause you to lose control of

the saw which could result in serious personal

injury.Donotrelyexclusivelyuponthesafety

devicesbuiltintoyoursaw.Asachainsawuser,

you should take several steps to keep your cutting

jobsfreefromaccidentorinjury.

Kickback is the result of tool misuse and/or incor-

rect operating procedures or conditions and can be

avoidedbytakingproperprecautionsasgivenbelow:

• Maintainarmgrip,withthumbsandngers

encircling the chain saw handles, with both

hands on the saw and position your body

and arm to allow you to resist kickback

forces. Kickback forces can be controlled by

the operator, if proper precautions are taken.

Do not let go of the chain saw.

• Donotoverreachanddonotcutabove

shoulder height. This helps prevent unin-

tended tip contact and enables better control

of the chain saw in unexpected situations.

• Onlyusereplacementbarsandchainsspec-

iedbythemanufacturer.Incorrectreplace-

ment bars and chains may cause chain

breakage and/or kickback.

• Followthemanufacturer’ssharpeningand

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead

to increased kickback.

14. Before starting work, check that the chain

saw is in proper working order and that its

condition complies with the safety regulations.

Check in particular that:

• Thechainbrakeisworkingproperly;

• Therun-downbrakeisworkingproperly;

•

Thebarandthesprocketcoverarettedcorrectly;

• Thechainhasbeensharpenedandten-

sioned in accordance with the regulations.

15.

Do not start the chain saw with the chain cover

being installed on it. Starting the chain saw with the

chain cover being installed on it may cause the chain

covertothrownoutforwardresultinginpersonalinjury

anddamagetoobjectsaroundtheoperator.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Important safety instructions for

battery cartridge

1.

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4.

If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current

ow, overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a re.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. The contained lithium-ion batteries are subject

to the Dangerous Goods Legislation require-

ments.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required.

Please also observe possibly more detailed

national regulations.

Tape or mask off open contacts and pack up the

battery in such a manner that it cannot move

around in the packaging.

11. Follow your local regulations relating to dis-

posal of battery.

SAVE THESE INSTRUCTIONS.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Makita DUC303 Kettingzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Makita. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Makita DUC303 Kettingzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Makita Kettingzagen
Meer handleidingen voor Kettingzagen

Veelgestelde vragen over Makita DUC303 Kettingzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Makita BUC122RFEX Kettingzaag

Handleiding

Makita DCS232T Kettingzaag

Handleiding

Makita DUC256CZ Kettingzaag

Handleiding

Makita EA3203S Kettingzaag

Handleiding

Makita EA3501S Kettingzaag

Handleiding

Makita BUC122 Kettingzaag

Handleiding

Makita DUC355PT2J Kettingzaag

Handleiding

Makita UC4051A Kettingzaag

Gerelateerde categorieën