Handleiding Maytag MFW108EDWT MM Wasmachine

Handleiding

5019 901 01759

Add detergent as indicated on the front page and as

described in the chapter “Detergent and Additives”

in your Instructions for Use.

1. Turn the

programme selector

to the desired

programme and temperature.

2. The

time display

shows the duration of the chosen

programme (in hours and minutes), and the indication

lamp next to the

“Start (Pause)”

button flashes.

3. The indication lamp of the predefined

spin

speed

lights up.

Push the button(s) of any option(s) desired - the

respective indication lights up.

When the combination of programme and additional

option(s) is not possible, the indication lights switch off

automatically. Unsuitable combinations of options are

deselected automatically.

“Eco” button

• With a modified temperature profile and a slightly

prolonged washing duration, the optimum

combination of excellent washing result and even

lower energy consumption is achieved.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time

by approximately 15 min.

“Easy ironing” button

• Can be used together with “Cotton”,

“Synthetics” and “Daily load” programmes to

make ironing easier.

• Increases the water quantity and the clothes are

spun very gently.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helping

people with allergies.

• Selectable only on the lowest temperature step

of each programme.

“Rinse hold” button

• The laundry remains in the last rinse water

without progressing to the final spin cycle to avoid

creasing and prevent colours from changing.

• This option is particularly recommended for the

programmes “Synthetics”, “Daily load” and

“Delicates”.

• It is particularly useful if you want to postpone

spinning to a later time, or if you want to drain only.

Note:

The programme stops to “Rinse hold” at

the time the “Rinse hold” light in the programme

sequence indication is on. The indication lamp

next to the

“Start (Pause)”

button flashes.

Terminate the “Rinse hold” option:

• Press the

“Start (Pause)”

button; the

programme will terminate automatically with the

final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain”

programme and press the

“Start (Pause)”

button.

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

*

Cotton (Hygienic) 95 max. 74

**

2.10 2:10

Cotton 60 max. 69 1.33 2:10

Cotton with “Eco”

***

60 max. 54 1.19 2:20

Cotton 40 max. 69 0.75 2:05

Synthetics 60 3.0 46

**

0.80 1:35

Synthetics 40 3.0 42 0.40 1:20

Delicate 30 1.5 60 0.50 0:45

Everyday Wash 40 4.0 48 0.50 1:00

Express Wash (30 min) 30 4.0 48 0.25 0:30

Woolens 40 1.0 60 0.55 0:45

Handwash 40 1.0 45 0.55 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home

may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*

The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions

applicable at that time.

**

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***

Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR

AND SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain

during rinse. The water is drained out only.

The “Start Delay” allows to run the machine at the

consumer’s convenience, for example at night when

electricity is cheaper.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay

time by 1 to 23 hours;

• Press the

“Start (Pause)”

button.

The indication light next to the “Start Delay”

button lights up and the countdown of the delay

time begins.

•The time delay indication disappears when the

programme starts and it is replaced by the

remaining programme time.

• Once having pressed the

“Start (Pause)”

button,

the number of hours preselected can be reduced

by pressing again the “Start Delay” button.

To cancel the “Start Delay”

..before you press the “Start (Pause)” button:

• Turn the programme selector to another

position or press the

“Reset”

button.

..after having pressed the “Start (Pause)” button:

• Press the

“Reset”

button for at least 3 seconds - the

start delay time disappears from the time display

Open the tap and press the

“Start (Pause)”

button.

The indication lamp next to the

“Start (Pause)”

button lights up. The programme sequence indicator

shows the current programme phase, running from

left to right through Wash, Rinse, Spin/Drain.

The time display shows the remaining programme

time. Due to variations in load and temperature of inlet

water, the remaining time is newly calculated in certain

programme phases. If this is the case, an animation

appears on the time display.

Before starting and after end of a programme, the

lamp lights to show that the door can be opened. As

long as a wash programme is running, the door

remains locked and must on no account be forced

open. In case you have an urgent need to open it

during a running programme, refer to “Cancel

(Reset) a running programme before the end”.

“Service”

Lighting up of the “Service” indication can be caused by

a fault in an electrical component. Refer to the

“Troubleshooting Guide” in your Instructions for Use; if

the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply.

Open the water tap; if the indication still lights up,

refer to the “Troubleshooting Guide” in the

Instructions for Use.

“Filter”

Waste water is not pumped out. Check whether the

drain hose is kinked or the filter must be cleaned; in

the latter case refer to the Instructions for Use

(“Removing the Filter”).

• All the lights of the programme sequence

indicator are off, and the “Door open”

indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

1. Press the

“Start (Pause)”

button to pause the

programme. The light flashes.

2. Select the new programme and, if you want,

another spin speed and any options.

3. Press the

“Start (Pause)”

button again. The

new programme continues at the same position

where the previous programme was interrupted.

Do not add detergent for this programme.

The

“Reset”

button cancels a programme before

the end.

• Press the

“Reset”

button for at least 3

seconds. Any existing water is drained out

before the door can be opened.

START DELAY

PROGRAMME START

“DOOR OPEN” INDICATION

RED INDICATIONS

PROGRAMME END

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

90101759GB.fm Page 2 Wednesday, May 21, 2008 5:56 PM

Black process 45.0° 100.0 LPI

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Maytag MFW108EDWT MM Wasmachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Maytag. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Maytag MFW108EDWT MM Wasmachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Maytag Wasmachines
Meer handleidingen voor Wasmachines

Veelgestelde vragen over Maytag MFW108EDWT MM Wasmachine

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Maytag MVWB766FW Wasmachine

Handleiding

Maytag MHW5100DC Maxima Wasmachine

Handleiding

Maytag FMMR80221 Wasmachine

Handleiding

Maytag MVWC300BW Wasmachine

Handleiding

Maytag MHW6000AG Maxima XL Wasmachine

Handleiding

Maytag MVW8230HC Wasmachine

Handleiding

Maytag MHW8000AW Maxima XL Wasmachine

Handleiding

Maytag MAH7550AGW Neptune Wasmachine

Gerelateerde categorieën