Handleiding Maytag UXD8630DYS Afzuigkap

Handleiding

4

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

Tools Needed

■ Jigsaw or keyhole saw

■ Drill

■ ¹⁄₈" (3 mm) drill bit for pilot holes

■ Pencil

■ Tape measure or ruler

■ Flat-blade screwdriver

■ Phillips screwdriver

■ ³⁄₈" (9.5 mm) nut driver

■ Level

■ Pliers

■ Metal snips

■ Wire stripper or utility knife

■ Caulking gun and weatherproof caulking compound

Parts Supplied

■ Top trim - stainless

■ End caps (2)

■ Lower support legs (2)

■ Undercounter mounting brackets (2)

■ 4 x 8 mm screws (16)

■ 3.5 x 9.5 mm screws (3)

■ 3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular damper

■ 4³⁄₄" (12.0 cm) motor box

■ ¼" (6.4 mm) deep cover

■ Flat vent cover plate

■ 6" (15.2 cm) diameter vent transition with damper

Parts Needed

■ UL listed or CSA approved ½" (12.7 mm) conduit connector

■ Wall or roof cap with damper to match vent system

■ Vent system

■ Home power supply cable

■ UL listed wire connectors (3)

■ Vent clamps/duct tape as required

Location Requirements

NOTE: Downdraft vent is installed directly behind the cooktop.

Install the downdraft vent first, then install the cooktop.

IMPORTANT: Observe all governing codes and ordinances.

■ Have a qualified technician install the downdraft vent. It is the

installer’s responsibility to comply with installation clearances

specified on the model/serial rating plate. The model/serial

rating plate is located on the front of the downdraft vent

above the terminal box cover.

■ Downdraft vent location should be away from strong draft

areas, such as windows, doors, and strong heating vents or

fans.

■ Cabinet opening dimensions that are shown must be used.

Given dimensions provide minimum clearance.

■ Consult the cooktop manufacturer installation instructions

before making any cutouts.

Check that the downdraft vent and cooktop location will

clear the cabinet walls, backsplash, and rear wall studs

inside the cabinet.

Check for the minimum distance between the front edge

of the countertop and the front edge of the cooktop. The

minimum horizontal distance between the overhead

cabinets is the same as the width of the installed

downdraft vent.

■ All openings in ceiling and wall where the downdraft vent will

be installed must be sealed.

■ Grounded electrical outlet is required. See “Electrical

Requirements” section.

■ When installing the downdraft vent, the cabinet drawer will

need to be removed and the drawer front installed

permanently to the cabinet.

Cabinet Construction:

Downdraft vent is designed for use in a cabinet with a depth of

24" (61 cm). Some installations require a countertop deeper than

25" (63.5 cm). See the “Countertop Cutout Dimensions Chart.”

The maximum depth of the overhead cabinet is 13" (33 cm).

Overhead cabinets installed at either side of the downdraft vent

must be 18" (45.7 cm) above the cooking surface.

For Mobile Home Installations

The installation of this downdraft vent must conform to

the Manufactured Home Construction Safety Standards,

Title 24 CFR, Part 328 (formerly the Federal Standard for

Mobile Home Construction and Safety, title 24, HUD, Part 280)

or when such standard is not applicable, the standard for

Manufactured Home Installation 1982 (Manufactured Home

Sites, Communities and Setups) ANSI A225.1/NFPA 501A, or

latest edition, or with local codes.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Maytag UXD8630DYS Afzuigkap. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Maytag. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Maytag UXD8630DYS Afzuigkap in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Maytag Afzuigkappen
Meer handleidingen voor Afzuigkappen

Veelgestelde vragen over Maytag UXD8630DYS Afzuigkap

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Maytag UXT4130ADW Afzuigkap

Handleiding

Maytag UXW7230BSS Afzuigkap

Handleiding

Maytag UXT4236ADB Afzuigkap

Handleiding

Maytag WVW57UC6FS Afzuigkap

Handleiding

Maytag UXT4030ADB Afzuigkap

Handleiding

Maytag UXT4130ADB Afzuigkap

Handleiding

Maytag UXT4230AYS Afzuigkap

Handleiding

Maytag UXT5230BDB Afzuigkap

Gerelateerde categorieën