Handleiding McIntosh XR100 Luidspreker

Handleiding

5

Connector/Cable Information, Introduction and Performance Features

Performance Features

• Woofers with Patented LD/HP

®

Technology

The McIntosh Low Frequency Loudspeaker Elements

feature the patented LD/HP Magnetic Circuit Design.

This design, when compared to conventional Loud-

speaker Drivers, reduces distortion significantly. It

also increases power handling and efficiency.

The rear vent through the magnetic assembly offers

improved heat dissipation. The die cast basket has an

open air area under the voice coil/spider assembly to

prevent displacement noise. The polypropylene cone

with a rubber surround has a four layer copper voice

coil and is rigid to perform as a near perfect air piston.

All together these advances in woofer design

construction and materials produce the very important

first several octaves of music, with a high degree of

accuracy and superb transient response. This per-

formance level rivals woofers twice the size of the

XR100 woofer.

• Neodymium-Iron-Boron Alloy Magnets

The 10 two inch Midrange Drivers and the three-quar-

ter inch Dome Super Tweeter all use this Alloy. The

Neodymium-Iron-Boron Alloy has the highest flux

density per unit of volume. This allows for a smaller

physical size driver and thus closer driver to driver

placement for improved dispersion.

• Dual Midrange Crossover Points

There are several benefits when using multiple Mid-

range drivers. First, there is a substantial increase

in power handling capacity far greater than a single

larger diameter midrange driver.

Second, due to mutual acoustic coupling there is an

increase in output volume while at the same time a re-

duction in audible distortion. Eight of the 10 Midrange

Drivers reproduce the lower two octaves of midrange

frequencies. The remaining two Midrange Drivers

reproduce the upper two octaves of midrange frequen-

cies and are located directly adjacent to the tweeter.

This maintains wide dispersion with a stable sound

image throughout the upper midrange frequencies.

• Low Harmonic and Intermodulation Distortion

The XR100 Loudspeaker System is capable of repro-

ducing the full dynamic range of a symphony orches-

tra with very low audible distortion of any kind.

• Low Frequency Port

The XR100 Loudspeaker System utilizes a verti-

cal port with a rear opening to increase bass output,

reduce distortion and improve the overall efficiency of

the Loudspeaker.

• High Power Handling

The Loudspeaker Elements and Crossover Compo-

nents of the XR100 are all chosen for use with ampli-

fiers up to 600 watts, yet can be driven with a 75 watt

amplifier.

• Loudspeaker Protection

The XR100’s built-in speaker protection incorporates

four automatic resetting solid-state devices in the

crossover network. One protects the tweeters, one

each for the low and upper midrange drivers and one

for the woofers.

• Superior Imaging

Locating the Super Tweeter between the multiple

Midrange drivers generates a symmetrical polar re-

sponse for superior imaging. The Midrange and Super

Tweeter Drivers are precisely aligned on the precision

machined mounting plate of 5/8 inch thick aluminium

with a Brushed Champagne Gold Finish.

• Versatile Operation

In additional to the regular connections, the XR100

Loudspeaker System provides separate connections

for Bi-Amplification and Bi-Wiring hookups.

• McIntosh Custom Binding Posts

McIntosh Patent Gold Plated Output Terminals deliver

high current output. They accept large diameter wire

and spade lugs. Banana plugs may also be used.

• Power Control

The Power Control Input supplies power to illuminate

the XR100 McIntosh Logo and Power Control Out-

put supplies power for remote turn-on of additional

Components.

• Loudspeaker Enclosure

The XR100 Loudspeaker enclosure is constructed

with non-parallel internal sides to reduce internal

standing waves. It has multiple front to back and side

to side internal braces to form a dampened rigid Loud-

speaker enclosure. The XR100 is available in various

real wood veneers with a high gloss polyester finish.

• Loudspeaker Grille

The custom designed molded Loudspeaker Front

Grille exhibits nearly perfect Acoustic Transparency

and is secured to the Loudspeaker Enclosure using

Neodymium Magnets.

• Solid State Front Panel Logo Illumination

The even Illumination of the Front Panel Logo is ac-

complished by the combination of custom designed

Light Diffusers and extra long life Light Emitting

Diodes (LEDs).

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je McIntosh XR100 Luidspreker. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met McIntosh. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van McIntosh XR100 Luidspreker in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor McIntosh Luidsprekers
Meer handleidingen voor Luidsprekers

Veelgestelde vragen over McIntosh XR100 Luidspreker

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

McIntosh LCR80 Luidspreker

Handleiding

McIntosh RS150 Luidspreker

Handleiding

McIntosh HT30-IW Luidspreker

Handleiding

McIntosh ML1 Luidspreker

Handleiding

McIntosh XRT1K Luidspreker

Handleiding

McIntosh HT30-OW Luidspreker

Handleiding

McIntosh XRT2K Luidspreker

Handleiding

McIntosh XCS1.5K Luidspreker

Gerelateerde categorieën