Handleiding Metabo CR 14DSL Reciprozaag

Handleiding

13. Do not use power tools if the plastic housing or

handle is cracked.

Cracks in the tool’s housing or handle can lead to

electric shock. Such tools should not be used until

repaired.

14. Blades and accessories must be securely

mounted to the tool.

Prevent potential injuries to youself or others. Blades,

cutting implements and accessories which have been

mounted to the tool should be secure and tight.

15. NEVER use a tool which is defective or operating

abnormally.

If the tool appears to be operating unusually, making

strange noises, or otherwise appears defective, stop

using it immediately and arrange for repairs by a

metabo HPT authorized service center.

16. Carefully handle power tools.

Should a power tool be dropped or struck against

hard materials inadvertently, it may be deformed,

cracked, or damaged.

17. Do not wipe plastic parts with solvent.

Solvents such as gasoline, thinner benzine, carbon

tetrachloride, and alcohol may damage and crack

plastic parts. Do not wipe them with such solvents.

Wipe plastic parts with a soft cloth lightly dampened

with soapy water and dry thoroughly.

18. ALWAYS wear eye protection that meets the

requirement of the latest revision of ANSI

Standard Z87.1.

19. ALWAYS be careful with buried objict such as an

underground wiring.

Touching these active wiring or electric cable with this

tool, you may receive an electric shock.

Comfi rm if there are any buried object such as electric

cable within the wall, fl oor or ceiling where you are

going to operate here after.

20. Defi nitions for symbols used on this tool

V .......... volts

—

---

......... direc t cur rent

no ........ rated speed

---/min .. revolutions or reciprocation per minute

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CHARGER

WARNING

Death or serious bodily injury could result from

improper or unsafe use of battery chargers.

To avoid these risks, follow these basic safety

instructions:

SPECIFIC SAFETY RULES AND SYMBOLS

1. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring.

Cutting accessory contacting a “live” wire may make

exposed metal parts of the power tool “live”and could

give the operator an electric shock.

2. Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the work by hand or against your body leaves

it unstable and may lead to loss of control.

3. ALWAYS wear ear protectors when using the tool

for extended periods.

Prolonged exposure to high intensity

noise can cause hearing loss.

4. NEVER touch the blade with bare hands after

operation.

5. Because the cordless reciprocating saw operates by

battery power, be aware of the fact that it can begin to

operate at any time.

6. When working at elevated locations, clear the area

of all other people and be aware of conditions below

you.

7. NEVER touch moving parts.

NEVER place your hands, fi ngers or other body parts

near the tool’s moving parts.

8. NEVER operate without all guards in place.

NEVER operate this tool without all guards or safety

features in place and in proper working order. If

maintenance or servicing requires the removal of a

guard or safety feature, be sure to replace the guard

or safety feature before resuming operation of the

tool.

9. Use right tool.

Don’t force small tool or attachment to do the job of a

heavy-duty tool.

Don’t use tool for purpose not intended —for

example— don’t use circular saw for cutting tree

limbs or logs.

10. NEVER use a power tool for applications other

than those specifi ed.

NEVER use a power tool for applications other than

those specifi ed in the Instruction Manual.

11. Handle tool correctly.

Operate the tool according to the instructions provided

herein. Do not drop or throw the tool. NEVER allow the

tool to be operated by children, individuals unfamiliar

with its operation or unauthorized personnel.

12. Keep all screws, bolts and covers tightly in place.

Keep all screws, bolts, and plates tightly mounted.

Check their condition periodically.

4

English

000Book̲CR14DSL̲metabo.indb4000Book̲CR14DSL̲metabo.indb4 2018/11/0110:38:192018/11/0110:38:19

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Metabo CR 14DSL Reciprozaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Metabo. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Metabo CR 14DSL Reciprozaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Metabo Reciprozagen
Meer handleidingen voor Reciprozagen

Veelgestelde vragen over Metabo CR 14DSL Reciprozaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Metabo CR 36DA Reciprozaag

Handleiding

Metabo CR 13VST Reciprozaag

Handleiding

Metabo CR 10DL Reciprozaag

Handleiding

Metabo CR 13VBY Reciprozaag

Handleiding

Florabest FAAS 10.8 A2 Reciprozaag

Handleiding

Scheppach CRS450-20ProS Reciprozaag

Handleiding

DeWalt DCS551B Reciprozaag

Handleiding

Voltgear 6500140 Reciprozaag

Gerelateerde categorieën