Handleiding Metabo CS 33EDTP Kettingzaag

Handleiding

2

English

WARNING

The engine exhaust from this product contains chemical

known to the State of California to cause cancer, birth

defects or other reproductive harm.

SAFETY PRECAUTIONS FOR

CHAIN SAW USERS

Kickback safety precautions

WARNINGS! : Kickback may occur when the nose

or tip of the guide bar (kickback zone (1)) touches an

object, or when the wood closes in and pinches the

saw chain in the cut. Tip contact in some cases may

cause a lightning-fast reverse reaction, kicking the

guide bar up and back toward the operator. Pinching

the saw chain along the top of the guide bar may push

the guide bar rapidly back toward the operator. Either

of these reactions may cause you to lose control of the

saw, which could result in serious personal injury. Do

not rely exclusively upon the safety devices built into

your saw. As a chain saw user, you should take several

steps to keep your cutting jobs free from accident or

injury. ( Fig.1)

1

Fig. 1

○

With a basic understanding of kickback, you can

reduce or eliminate the element of surprise. Sudden

surprise contributes to accidents.

○

Keep a good fi rm grip on the saw with both hands,

the right hand on the rear handle and the left hand

on the front handle, when the engine is running. Use

a fi rm grip with thumbs and fi ngers encircling the

chain saw handles. A fi rm grip will help you reduce

kickback and maintain control of the saw. Don't let

go.

○

Make sure that the area in which you are cutting

is free from obstructions. Do not let the nose of

the guide bar contact a log, branch, or any other

obstruction that could be hit while you are operating

the saw.

○

Cut at high engine speeds.

○

Do not overreach or cut above shoulder height.

○

Follow the manufacturer's sharpening and

maintenance instructions for the saw chain.

○

Only use replacement bars and chains specifi ed by

the manufacturer or the equivalent.

Other safety precautions

○

Do not operate a chain saw with one hand! Serious

injury to the operator, helpers, bystanders, or any

combination of these persons may result from

one-handed operation. A chain saw is intended for

two-handed use.

○

Do not operate a chain saw when you are fatigued.

○

Use safety footwear, snug-fi tting clothing, protective

gloves, and eye, hearing, and head protection

devices.

○

Use caution when handling fuel. Move the chain saw

at least 10 feet (3 m) from the fueling point before

starting the engine.

○

Do not allow other persons to be near the chain saw

when starting or cutting with the chain saw. Keep

bystanders and animals out of the work area.

○

Do not start cutting until you have a clear work area,

secure footing, and a planned retreat path from the

falling tree.

○

Keep all parts of your body away from the saw chain

when the engine is running.

○

Before you start the engine, make sure that the saw

chain is not contacting anything.

○

Carry the chain saw with the engine stopped, the

guide bar and saw chain to the rear, and the muffl er

away from your body.

○

Do not operate a chain saw that is damaged,

improperly adjusted, or not completely and securely

assembled. Be sure that the saw chain stops moving

when the throttle control trigger is released.

○

Shut off the engine before setting the chain saw

down.

○

Use extreme caution when cutting small-size brush

and saplings because slender material may catch

the saw chain and be whipped toward you or pull

you off balance.

○

When cutting a limb that is under tension, be alert

for springback so that you will not be struck when

the tension in the wood fi bers is released.

○

Keep the handles dry, clean, and free of oil or fuel

mixture.

○

Operate the chain saw only in well-ventilated areas.

○

Do not operate a chain saw in a tree unless you have

been specifi cally trained to do so.

○

All chain saw service, other than the items listed in

the instruction manual(s) maintenance instructions,

should be performed by competent chain saw

service personnel. (For example, if improper tools

are used to remove the fl ywheel or if an improper

tool is used to hold the fl ywheel in order to remove

the clutch, structural damage to the fl ywheel could

occur and subsequently could cause the fl ywheel

to burst.)

000Book̲CS33EDTP̲US̲metabo.indb2000Book̲CS33EDTP̲US̲metabo.indb2 2018/09/0414:45:002018/09/0414:45:00

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Metabo CS 33EDTP Kettingzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Metabo. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Metabo CS 33EDTP Kettingzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Metabo Kettingzagen
Meer handleidingen voor Kettingzagen

Veelgestelde vragen over Metabo CS 33EDTP Kettingzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.