Handleiding Metabo NV 90AG(S) Spijkerpistool

Handleiding

6

English

Never use Nailer which is defective or operating

abnormally. If the Nailer appears to be operating

unusually, making strange noises, or otherwise

appears defective, stop using it immediately and

arrange for repairs by a metabo HPT authorized

service center.

(4) Disconnect the Nailer from the air source before

making any adjustments, changing accessories,

or storing the Nailer. Such preventive safety

measures reduce the risk of starting the Nailer

unintentionally.

(5) Store the Nailer when it is idle out of reach of

children and other untrained persons. A Nailer is

dangerous in the hands of untrained users.

(6) Maintain the Nailer with care. Keep the

Nailer Clean and lubricated for better and safer

performance.

(7) Check for misalignment or binding of moving

parts, breakage of parts, and any other condition

that may aff ect the Nailer's operation.

If damaged, have the Nailer serviced before using.

Because of high air pressure in the Nailer, cracks in

the surface are dangerous. To avoid this, do not drop

the Nailer or strike the Nailer against hard surfaces;

and do not scratch or engrave signs on the Nailer.

Many accidents are caused by poorly maintained

Nailers. There is a risk of bursting if the Nailer is

damaged.

(8) Do not use the Nailer that is not in proper

working order. Tags and physical segregation

shall be used for control.

(9) Use only accessories that are identifi ed by

metabo HPT for the specifi c Nailer. Use of an

accessory not intended for use with the specifi c

Nailer , increases the risk of injury to persons.

(10) Use only those fasteners listed in the

Accessories section of this manual. Fasteners not

identifi ed for use with this Nailer by metabo HPT are

able to result in a risk of injury to persons or Nailer

damage when used in this Nailer.

4. Service

(1) Tool service must be performed only by qualifi ed

repair personnel.

(2) When servicing a Nailer, use only identical

replacement parts. Use only authorized parts.

(3) Use only the lubricants supplied with the Nailer

or specifi ed by metabo HPT.

5. Air source

(1) Never connect to an air source that is capable

of exceeding 200 psi (13.7 bar 14 kgf/cm

2

) if a

regulator fails.

Over pressurizing the Nailer is able to result in

bursting, abnormal operation, breakage of the Nailer

or serious injury to persons.

DO NOT EXCEED 120 psi (8.3 bar 8.5 kgf/cm

2

).

Use only clean, dry, regulated compressed air at the

rated pressure or within the rated pressure range as

marked on the Nailer.

Always verify prior to using the Nailer that the air

source has been adjusted to the rated air pressure or

within the rated air-pressure range.

(2) Never use reactive gases such as oxygen,

carbon dioxide, combustible gases or any

bottled gas as an air source for the Nailer. Such

gases are capable of explosion and serious injury to

persons.

6. Others

(1) Before starting work, check the nailing operation

switching device.

This metabo HPT nailer includes a nailing operation

switching device.

Before starting work, check the setting of the

operation switching device.

If the switching device is not set properly, the Nailer

will not operate correctly.

(2) Always select the switching device that is

appropriate to the application and the training of

the operator.

(3) Be careful of double fi re and being hit by the

Nailer due to spring back (“recoil”). After driving

a nail, the Nailer may recoil causing it to move away

from the work surface.

SAFETY — Continued

WARNING

000BookNV90AG(S)metabo.indb6000BookNV90AG(S)metabo.indb6 2018/03/1915:58:402018/03/1915:58:40

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Metabo NV 90AG(S) Spijkerpistool. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Metabo. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Metabo NV 90AG(S) Spijkerpistool in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Metabo Spijkerpistolen
Meer handleidingen voor Spijkerpistolen

Beoordeling

Veelgestelde vragen over Metabo NV 90AG(S) Spijkerpistool

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Metabo NV 65AH2 Spijkerpistool

Handleiding

Metabo NR 65AK2 Spijkerpistool

Handleiding

Metabo NR 90AF(S1) Spijkerpistool

Handleiding

Metabo NR 83A5 Spijkerpistool

Handleiding

Metabo NV 83A2 Spijkerpistool

Handleiding

Metabo NR 90AC5 Spijkerpistool

Handleiding

Metabo NV 75AN Spijkerpistool

Handleiding

Metabo NV 75A5 Spijkerpistool

Gerelateerde categorieën