Handleiding Mido M026.627.37.051.00 Ocean Star Chronograph Horloge

Handleiding

Two Counters automatic chronograph Two Counters automatic chronograph

www.midowatches.com

244-B_EN / 04.20

2/4

Congratulations

We congratulate you on choosing a self-winding chronograph from

Mido

®, one of the most highly renowned Swiss brands in the world.

Meticulously designed, using only the highest quality materials and

components, your chronograph is protected against shock loads, varia-

tions in temperature, water and dust.

In the chronograph function, this model is able to time events lasting

up to 30 minutes, displaying all the results precisely to the nearest

1/10th of a second.

To ensure that your chronograph operates with perfect precision for

many years to come, we advise you to pay very careful attention to the

advice provided hereafter.

Usage / Settings

Models with a screwed crown

To ensure that they remain water-resistant, some models are fitted with

a screwed crown. Before setting the time, you must first unscrew the

crown to position IB before you can pull it out to position II.

Important : After each operation, you must always screw the crown

back down to ensure that your watch remains water-resistant.

Winding

Crown in position

I/IB

, not pulled out

Manual winding is necessary if you have not been wearing your watch

for some considerable period of time. To restart it, you only need to turn

the crown a few times (clockwise), or to tilt your watch from side to side

a few times. To restore the power reserve of your watch to 60 hours, you

need to turn the crown about 38 times (clockwise).

Whenever you wear your watch, the automatic mechanism is wound

every time you move your wrist.

Setting the time

Carefully pull the crown into position

II

; the seconds hand (

3

) stops at

this point. Turn the crown forwards or backwards until the hands display

the correct time. Once the hour hand passes the 12 o'clock position,

you can see if it indicates midnight (the date changes at this point)

or midday (the date does not change).

Advice on how to synchronise your watch

To synchronise the seconds hand (

3

) with an official time signal (radio,

TV, Internet), pull the crown into position

II

; the seconds hand stops at

this point. At the tone, press the crown back into position

I

(and tighten

it down if you have a model with a screwed crown).

Fast date correction

Important : Do not set the date* between 8.30 pm and 11 pm (the

movement is in the process of changing the date at these times).

By pressing the corrector (5) repeatedly, move the disc forward until

the desired date (4) is displayed. During this operation, your watch will

continue to function normally, so you will not need to alter the time.

Chronograph

Chronograph function

Press the Stop/Start push button (

8

) to start the timing operation.

Press the Stop/Start push button (

8

) again to stop the timing opera-

tion. The timing operation restarts when you press the Stop/Start push

button (

8

) again (time is added), or the two chronograph hands (

6, 7

) can

be reset to zero by pressing the push button (

9

). This is only used to reset

the chronograph hands to zero.

Care and maintenance

We would advise you to clean your watch regularly (except for the

leather strap) using a soft cloth and warm soapy water. After immersion

in salty water, rinse it in fresh water and leave it to dry completely.

Do not leave it anywhere where it might be subjected to major variations in

temperature or humidity, in direct sunlight or near strong magnetic fields.

To benefit from the highest standards of service and to ensure your

guarantee remains in force, please always contact an approved

Mido ®

representative or retailer.

The high-quality mechanism of your

Mido ®

watch will give you complete

satisfaction for many years provided that you take proper care of it.

However, we would advise you to have your watch inspected every 3 to

4 years by an approved

Mido ®

representative or retailer.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Mido M026.627.37.051.00 Ocean Star Chronograph Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Mido. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Mido M026.627.37.051.00 Ocean Star Chronograph Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Mido Horloges
Meer handleidingen voor Horloges

Beoordeling

Veelgestelde vragen over Mido M026.627.37.051.00 Ocean Star Chronograph Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Mido M027.407.11.010.01 Baroncelli Smiling Moon Gent Horloge

Handleiding

Mido M038.429.36.061.00 Multifort Dual Time Horloge

Handleiding

Mido M043.236.36.101.00 Rainflower Blossom Horloge

Handleiding

Mido M049.526.17.041.00 Multifort TV Big Date Horloge

Handleiding

Mido M7600.9.69.1 Baroncelli Horloge

Handleiding

Mido M038.431.36.057.00 Multifort M Chronometer Horloge

Handleiding

Mido M005.614.36.051.22 Multifort Chronograph Special Edition Horloge

Handleiding

Mido M037.207.36.041.00 Baroncelli Signature Lady Horloge

Gerelateerde categorieën