Handleiding Mido M026.629.11.041.00 Ocean Star GMT Horloge

Handleiding

GMT Calibre 80 watch

www.midowatches.com

261_EN / 03.19

2/2

Congratulations!

We would like to congratulate you on having chosen an automatic timepiece

made by MIDO

®

, a Swiss brand among the most highly renowned in

the world.

With its 24-hour hand (

4

) which indicates a second time zone, this automatic

GMT model is a veritable globetrotters' watch.

Meticulously assembled using high quality materials and components, your

watch is protected against impacts, variations in temperature, water and

dust. To ensure perfect and accurate operation for many years, we advise you

to closely follow the advice given in these instructions

.

Technical specifications

Calibre GMT 80.661 (based on ETA C07.661), Ø 11 1/2’’’ i.e. 25.60 mm,

thickness 5.77 mm, 25 jewels, 21,600 Vib/h, power reserve up to 80 hours,

NIVACHOC and NIVACOURBE shock absorber systems, Elinchron balance

spring, nickel-plated bridges, oscillating weight with Côtes de Genève and

engraved solid black MIDO

®

logo. HMSD + 24H GMT functions. Set in

3 different positions for high precision. Power reserve up to 80 hours.

Use / Settings

Screw-in position (position 0)

The crown is fully screwed in against the case. When the crown is in this

position, your timepiece is guaranteed water-resistant.

Manual winding (position I)

The crown is unscrewed. To wind the watch manually, turn the crown

clockwise; the other direction is inactive. When first activating the watch

or after a stoppage, turn it through at least 25 revolutions to ensure it is

partially wound.

To wind the watch fully, carry out the 2 steps below in turn:

Step 1

To set the reference time, carry out the steps below in turn (crown in

position III):

– Unscrew the crown, and then pull it out to the third notch. The seconds

hand will stop, enabling you to set the time precisely.

– Set the reference time via the 24-hour hand (reading on the 24H dial) and

the minute hand (reading on the 12H dial), turning the crown in either

direction. Setting the reference time also drives the traditional hour hand

(local time). For this reason, you need to set the reference time before the

local time.

Step 2

To set the date and local time, carry out the steps below in turn (crown in

position II):

– Pull out the crown to the second notch.

– Set the date by turning the crown in either direction. The hour hand will

move in 1-hour steps. The date will change when the hour hand passes

midnight, in either direction, after two dial revolutions.

– Set the local time by turning the crown in either direction. The hour hand

will move in 1-hour steps. Make sure to distinguish between midday and

midnight (the date will change when the hands pass midnight).

– Push in the crown and then screw it back in. The local time must be the

same as the reference time (24-hour hand).

Travelling

Adjusting the local time (crown in position II):

When travelling, to modify the local time only (without modifying the

reference time in 24-hour format), carry out the steps below in turn:

– Unscrew the crown, and then pull it out to the first notch.

– Set the local time by turning the crown in either direction. The hour hand

will move in 1-hour steps. The date is linked to the local time, and will be

adjusted automatically when the hour hand passes midnight.

– Push in the crown and then screw it back in.

Important: Never set the date between 10 pm and 2am (the movement

is in the process of changing the date).

Care and maintenance

We would advise you to clean your watch regularly (except for the leather

strap) using a soft cloth and lukewarm soapy water. After immersion in salt

water, rinse it in fresh water and leave it to dry completely.

Do not leave it anywhere where it might be subjected to major variations in

temperature or humidity, in direct sunlight or near strong magnetic fields.

To ensure that you receive the best possible service and the warranty remains

valid, always consult an approved MIDO

®

dealer or agent.

The high-quality finish mechanism in your MIDO

®

watch will give you

complete satisfaction for many years if properly cared for. However, we

recommend that you have your watch checked every 3 to 4 years by your

approved MIDO

®

dealer or agent.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Mido M026.629.11.041.00 Ocean Star GMT Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Mido. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Mido M026.629.11.041.00 Ocean Star GMT Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Mido Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Mido M026.629.11.041.00 Ocean Star GMT Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Mido M037.436.11.061.00 Baroncelli Signature Skeleton Horloge

Handleiding

Mido M8340.4.B3.11 All Dial IBA Horloge

Handleiding

Mido M026.829.17.051.00 Ocean Star Decompression Worldtimer Horloge

Handleiding

Mido M026.830.17.421.00 Ocean Star Tribute Gradient Horloge

Handleiding

Mido M005.614.11.061.00 Multifort Chronograph Horloge

Handleiding

Mido M040.407.33.027.00 Multifort Powerwind Horloge

Handleiding

Mido M037.207.11.041.01 Baroncelli Signature Horloge

Handleiding

Mido M021.407.11.411.01 Commander Gradient Horloge

Gerelateerde categorieën