Handleiding Milwaukee 2766-22 Slagmoersleutel

Handleiding

3

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another. Shorting the battery terminals together may

cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, ush with water. If liquid con-

tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behavior resulting in re,

explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specied in the instructions.

Charging improperly or at temperatures outside the

specied range may damage the battery and increase

the risk of re.

SERVICE

• Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

IMPACT WRENCHES

• Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting

a “live” wire may make exposed metal parts of the

power tool “live” and could give the operator an electric

shock.

• Wear ear protectors when impact drilling. Expo-

sure to noise can cause hearing loss.

• Use only sockets and other accessories speci-

cally designed for use on impact wrenches and

drivers. Other sockets and accessories might shatter

or break causing injury.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

SYMBOLOGY

Volts

Direct Current

No Load Revolutions per Minute (RPM)

Impacts per Minute Under Load (IPM)

C

US

UL Listing for

Canada and U.S.

SPECIFICATIONS

Volts .............................................................. 18 DC

Battery Type .................................................M18™

Charger Type ................................................M18™

Recommended Ambient

Operating Temperature ......................0°F to 125°F

Cat. No. ..................................................... 2766-20

Anvil Type ...................................... 1/2" Square-Pin

RPM ............................................................. 0-1800

IPM .............................................................. 0-2400

Cat. No. ..................................................... 2767-20

Anvil Type ....................................1/2" Square-Ring

RPM ............................................................. 0-1750

IPM .............................................................. 0-2100

FUNCTIONAL DESCRIPTION

1. 1/2" Square drive anvil with pin detent (2766-20)

2. Control switch

3. Trigger

4. 4-Mode drive control

5. LED

6. Handle

7. 1/2" Square drive anvil with friction ring (2767-20)

1

2

4

5

3

7

6

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Milwaukee 2766-22 Slagmoersleutel. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Milwaukee. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Milwaukee 2766-22 Slagmoersleutel in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Milwaukee Slagmoersleutels
Meer handleidingen voor Slagmoersleutels

Veelgestelde vragen over Milwaukee 2766-22 Slagmoersleutel

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Milwaukee 2966-20 Slagmoersleutel

Handleiding

Milwaukee 2855P-20 Slagmoersleutel

Handleiding

Milwaukee 2662-20 Slagmoersleutel

Handleiding

Milwaukee 2855-20 Slagmoersleutel

Handleiding

Milwaukee 2769-22R Slagmoersleutel

Handleiding

Milwaukee 2864-20 Slagmoersleutel

Handleiding

Milwaukee 2863-20 Slagmoersleutel

Handleiding

Milwaukee 2553-20 Slagmoersleutel

Gerelateerde categorieën