Handleiding Milwaukee 3601-20 Schroef-boormachine

Handleiding

3

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acciden-

tally occurs, ush with water. If liquid contacts

eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behavior resulting in re,

explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specied in the instructions. Charging im-

properly or at temperatures outside the specied range

may damage the battery and increase the risk of re.

SERVICE

• Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

DRILL / DRIVERS

Safety instructions for all operations

•Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

•Hold the power tool by insulated gripping

surfaces, when performing an operation where

the cutting accessory or fasteners may contact

hidden wiring. Cutting accessory or fasteners

contacting a “live” wire may make exposed metal

parts of the power tool “live” and could give the

operator an electric shock.

Safety instructions when using long drill bits

•Never operate at higher speed than the maximum

speed rating of the drill bit. At higher speeds, the

bit is likely to bend if allowed to rotate freely without

contacting the workpiece, resulting in personal injury.

• Always start drilling at low speed and with the

bit tip in contact with the workpiece. At higher

speeds, the bit is likely to bend if allowed to rotate

freely without contacting the workpiece, resulting in

personal injury.

• Apply pressure only in direct line with the bit

and do not apply excessive pressure. Bits can

bend causing breakage or loss of control, resulting

in personal injury.

•

WARNING

To reduce the risk of injury, when

working in dusty situations, wear

appropriate respiratory protection or use an

OSHA compliant dust extraction solution.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

•

arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

SPECIFICATIONS

Volts.............................................................. 18 DC

Battery Type .................................................M18™

Charger Type................................................M18™

Steel ................................................................. 1/2"

Wood Flat Bit ............................................... 1-1/4"

Auger Bit ................................................. 1"

Hole Saw................................................. 2"

Screws (dia.) ........................................ 1/2"

Masonry (3602-20 only).................................... 3/8"

Cat. No. ..................................................... 3601-20

No Load RPM ....... Low 0 - 550 High 0 - 1700

Cat. No. ..................................................... 3602-20

No Load RPM ....... Low 0 - 550 High 0 - 1700

BPM ..................................................... 0 - 25,500

Recommended Ambient

Operating Temperature ......................0°F to 125°F

FUNCTIONAL DESCRIPTION

1. Keyless chuck

2. Torque selector collar

3. Speed selector

4. Control switch

5. Handle

6. Belt hook

7. LED

8. Trigger

Cat. No.

3602-20

1

4

5

2

3

6

8

7

SYMBOLOGY

Volts

Direct Current

No Load Revolutions per Minute (RPM)

Blows per Minute under Load (BPM)

C

US

UL Listing for Canada and U.S.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Milwaukee 3601-20 Schroef-boormachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Milwaukee. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Milwaukee 3601-20 Schroef-boormachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Milwaukee Schroef-boormachines
Meer handleidingen voor Schroef-boormachines

Veelgestelde vragen over Milwaukee 3601-20 Schroef-boormachine

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Milwaukee 2403-20 Schroef-boormachine

Handleiding

Milwaukee 2806-22 Schroef-boormachine

Handleiding

Milwaukee 2902-22 Schroef-boormachine

Handleiding

Milwaukee 2406-20 Schroef-boormachine

Handleiding

Milwaukee 2904-22 Schroef-boormachine

Handleiding

Milwaukee 3602-22CT Schroef-boormachine

Handleiding

Milwaukee 2607-20 Schroef-boormachine

Handleiding

Milwaukee 2804-20 Schroef-boormachine

Gerelateerde categorieën