Handleiding Miomare IAN 285105 Kraan

Handleiding

6 GB/IE/NI

water can lead to serious damage to buildings

or household fittings and furniture. Check all

connections for leaks carefully.

Ensure that all seals are correctly seated to

prevent leakage of water.

CAUTION! DANGER OF SCALDING!

When making the hot water setting please ensure

that the temperature of the water is not too high.

Before installation, make yourself familiar with

all the existing services, e.g. water connection

and stopcocks.

Please read carefully through these operating

instructions before installing and using the product.

Keep all the safety advice and instructions in a

safe place for future reference!

Installation

Installing the tap

Turn off the main water supply to prevent serious

leakage of water. Allow any remaining water

in the pipework to drain.

Install the tap as shown in figs. A–C.

CAUTION! Do not bend the hoses or place

them under tension. Otherwise material damage

could result.

Attaching the pop-up waste

Install the pop-up waste as shown in fig. D–F.

Using the pop-up waste

See fig. G.

Flushing the tap

The tap must be flushed through before first use

to remove any dirt. To do this, follow these steps

(see fig. H):

Screw the mixer nozzle

17

off.

Open the main water supply and allow the

water to run for two minutes.

Then screw the mixer nozzle on again.

Operation

Bringing into use

Note: If the tap has not been used for a long period

flush the pipes through thoroughly in order to avoid

stagnation and build-up of residues in the drinking

water supply.

Open the main water supply.

Lift the control lever

16

and swivel it to the right

or left to regulate the strength or temperature

of the water flow.

Hot water:

Swivel the control lever to the left.

Cold water:

Swivel the control lever to the right.

Check that the mixer tap is working properly.

To do this, swivel the lever into all the possible

positions. Please check the connections regularly

for leaks.

Setting the temperature limiter

The cartridge

22

in this unit has a temperature limiter.

This function is not activated in the factory (neutral

setting).

CAUTION! Change the temperature limiter

setting only after the tap has been installed.

Turn off the main water supply.

Remove the red / blue hot / cold label

19

care-

fully by a small flat screwdriver (see fig. I).

Release the locking screw

18

by turning it anti-

clockwise using a hexagon socket screw key.

CAUTION! Do not take the screw completely

out; just loosen it until the control lever

16

can

be easily taken off.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Miomare IAN 285105 Kraan. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Miomare. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Miomare IAN 285105 Kraan in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Miomare Kranen
Meer handleidingen voor Kranen

Veelgestelde vragen over Miomare IAN 285105 Kraan

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Miomare IAN 312113 Kraan

Handleiding

Miomare IAN 285707 Kraan

Handleiding

Miomare IAN 293051 Kraan

Handleiding

Miomare IAN 298753 Kraan

Handleiding

Miomare IAN 281840 Kraan

Handleiding

Miomare IAN 106850 Kraan

Handleiding

Miomare IAN 104720 Kraan

Handleiding

Miomare IAN 315297 Kraan

Gerelateerde categorieën