Handleiding Mistral MIM12S IJsblokjesmachine

Handleiding

9 10

5

6

6

7

4

5

1

8

TABLE OF CONTENTS

Operating procedures & maintenance

Unpacking your ice maker

Connecting your ice maker

How to clean

noitacificepS

Important safety instruction 

Using your ice maker

Important safety tips

Name of the parts

Before getting started

 

Care and maintenance

Troubleshooting

5 7 8

Tabletop Ice-Maker

UNPACKING YOUR ICE MAKER

OPERATING PROCEDURES & MAINTENANCE

1. Remove all

exterior and interior packaging. Check that ice basket and ice scoop is included.

If any part or accessory is missing, please contact our customer service.

2. Clean the interior with lukewarm water and a soft cloth. Remove the ice basket and wash it

in warm water.

3. Find a location for your ice maker that is protected from direct sunlight and other sources

of heat (i.e.: stove, furnace, radiator). Place the ice maker on a level surface. Make sure that

there is at least 15cm of space between the back and sides of your ice maker and walls.

4. Allow one hour for the refrigerant fluid to settle before plugging in the unit.

5. The appliance must be positioned so that the plug is accessible.

CONNECTING YOUR ICE MAKER

DANGER

Improper use of

the grounded plug can result in the risk of electrical

shock. If the power cord is damaged please call our customer service

at 1300 373 199.

1. This u

nit should be properly grounded for your safety. The power cord of this appliance is

equipped with an earthed plug which connects with earthed wall outlets to minimize the

possibility of electric shock.

2. Plug your appliance into a Domestic Power Outlet. Do not under any circumstances, cut or

remove the third (ground) prong from the power cord. Any questions concerning power and/or

grounding should be directed toward a certified electrician.

3. This appliance requires a standard 220-240 volt, 50Hz electrical Domestic Power Outlet.

6

6. Whi

le the ice-maker is operating, check water level periodically. If water pump can’t

inject water, the ice maker will stop automatically, and the “ADD WATER” indicator will

illuminate. Press the “ON/OFF” button, fill water up to the level mark and

press “ON/OFF” again.Allow 3 minutes for the refrigerant to settle before restarting.

7. The ice maker automatically stops working when the ice basket is full and the

“ICE FULL” indicator will be illuminated. Warning: Direct sunlight or sunlight reflection

may cause infrared sensor malfunction. If the unit does not stop, even ice cubes can

obstruct sensor, move the unit where there is no sunlight.

8. Change water in the water reservoir every 24 hours to ensure a reasonable hygiene

level. If unit is not in use, drain all water in the tank reservoir.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

"ADD WATER"

indi

cator is on.

of water.

Stop the

ice maker, fill water, and

press "ON/OFF" button again to

restart the unit.

"ICE FULL"

indicator is on.

Remove ice from ice basket.Ice basket is full.

No ice, but "ICE FULL"

indicator is illuminated.

1. Ice-Full sensor

(transmitter and

receiver) is covered

by the impurities

contained in water or

other pollutants.

2. Ice-Full sensor is

malfunctioning.

Use a soft cloth dip into water to

clean the Ice-Full sensor. After

cleaning, to see if the ice maker

resume working, otherwise,

please consult a certified

technician.

"ICE FULL"

indicator

is on for 3 seconds

and off for 3 seconds.

Ice shovel is stuck or

the flip system is

malfunctioning.

Check if the ice is blocking the ice

shovel, otherwise, press "ON/OFF"

button to turn off the ice maker

and press it again to turn it on

to see if it can make ice normally.

If the "ICE FULL"indicator is still

on for 3 seconds and off for 3

seconds, press "ON/OFF" button to

turn off the machine and consult a

certified technician.

PROBLEM POSSIBLE CA

USE SOLUTION

Water i

s added, but

"ADD WATER"

indicator is illuminated

and ice is not made.

Ice-Full sensor is

malfunctioning.

Please consult a certified

technician.

Ice cubes

stick

together.

Ice making cycle is

too long.

Stop the ice maker, and restart

when the ice blocks melt.

Select the small ice size.

Water temper

ature in

inner tank is too low.

Change the water in the

reservoir. Use water between

Leaving

ice in the appliance

for an extended period of

time may result in the

appliance recycling the ice

by melting it down and

making a new batch.

Transfer ready-made ice to

another container and store in a

cooler or freezer to avoid recycling.

PROBLEM

POSSIBLE CA

USE SOLUTION

The i

ce cubes are

melting.

Leaving ice in the appliance

for an extended period of

time may result in the

appliance recycling the ice

by melting it down and

making a new batch.

The ice maker is not designed

to store ice for very long.

Melting ice is normal operation

if ice is not used or moved to

a cooler or freezer regularly.

After extended period transfer

ready-made ice to another

container and store in a cooler

or freezer to avoid recycling.

Ice making cycle is

normal but no ice is

made.

Ambient temperature or

water temperature

in inner tank is too high.

Please operate the ice maker

below ambient temperature

of

and use col

d

water.

Refrigerant liquid leakage. Consult a qualified technician.

Pipe in the cooling

system is blocked.

Consult a qualified technician.

1

2

3

4

BEFORE GETTING STARTED

SPECIFICATION

IMPORTANT SAFETY TIPS

1. Before connecting the appliance to the power supply, let the unit stand upright for 1 hour,

which will reduce the possibility of the cooling system malfunctioning due to improper handling.

2. Clean your unit thoroughly before putting into use. (See “How to Clean”)

3. Use the parts diagram on page 4 to insure proper positioning of internal components.

Product Descri

ption Tabletop Ice Maker

Sil

ver

Width

227

313 334

Height Depth

Model No.

Color

Unit Dimensions

(mm)

IMPORTANT SAFETY INSTRUCTION

When using electrical appliances, basic safety precautions should be followed to reduce the

risk of fire, electric shock, and injury to persons or property. Read all instructions before using

any appliance.

IMPORTANT SAFETY TIPS

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety.

1. Children should be supervised to ensure that they do not play with the appliance.

2. Do not use extension cords, powerboards or adaptors. Plug directly into GPO only.

3. If the supply cord is damaged, it must be replaced by the manufacturer, its service

qualified person in order to avoid hazard.

4. Do not store explosive substances such as aerosol cans with a flammable propellant

in this appliance.

- WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure,

clear of obstruction.

- WARNING: Do not use mechanical devices or other means to accelerate the defrosting

process, other than those recommended by the manufacturer.

- WARNING: Do not damage the refrigerant circuit.

- WARNING: Do not use electrical appliances inside the food storage compartments of

the appliance, unless they are of the type recommended by the manufacturer.

- WARNING Ice-Maker shall only use water.

This appliance is intended to be used in household and similar applications such as：

- Staff kitchen areas in shops, offices and other working environments;

- Farm houses and by clients in hotels, motels and other residential type

environments;

- Bed and breakfast type environments;

- Catering and similar non-retail applications

1

1

Instruction Manual

Model: MIM12S

Consumer Service Centre:

Aus: 1300 373 199

NZ: 0800 200 037

GSM Retail Australia Pty Ltd has a policy of continual improvement throughout the product range. As such the unit

contained within may differ slightly from the unit illustrated on the pack.

MADE IN CHINA for GSM Retail Australia Pty Ltd.

GSM RETAIL AUSTRALIA PTY LTD

Gerard Sourcing & Manufacturing

4. Unplug the ice maker before cleaning or making repairs.

5. Exercise caution and use reasonable supervision when appliance is used near children.

6. Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard

or explosion.

7. Do not tip over.

8. If the ice maker is brought indoors from outdoors during the wintertime, give it a few

hours to adjust to room temperature before plugging it in.

9.

WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.

WARNING: Only plug appliance directly into domestic power outlet, do not use with power

boards, double adapters or extension cords

Units of physical quantities and their symbols according to international standardized system:

Symbol ISO 7010 W021

Warning: risk of fire / flammable materials .

Do not operate this or any other appliance with a damaged cord.

2. Connect directly to Domestic Power Outlets only. No other appliance should be

plugged into the same outlet. Be sure that the plug is fully inserted into the GPO

socket.

3. Do not run cord over carpeting or other heat insulators. Do not cover the cord. Keep

cord away from traffic areas, and do not submerge in water.

PARTS & FUNCTION DESCRIPTION

1. Cover: See through window to allow interior visibility.

2. Control panel: Easy to use, visible functions touch display

setting.

A) Selected ice size: small or large.

B) Power indicator.

C) Ice Compartment Full indicator

D) Water Level indicator.

E) Button to turn on/off the unit.

F) Button to select ice cube size.

3. Water drain cap: At front underside of the unit.

4. Ice full sensor. 5. Ice scoop.

6. Ice basket. 7. Air outlet.

8. MAXIMUM WATER LEVEL: --------△- --------(Not shown on the below

unit image.)

Remove the ice basket, you can see the water level mark.

Before usi

ng your ice maker, it is strongly recommended to clean it thoroughly.

The ice maker is not designed to be installed in an outside area such as a garage or a

porch. Ambient temperatures of below 50

O

F or above 100

O

F will hinder the performance

of the appliance.

HOW TO CLEAN

Remove the i

ce basket.

the drai

n plug from the front underside to drain out the water.

Clean

the interior with diluted detergent, warm water and a soft cloth.

3. The outside of the ice maker should be cleaned regularly with a mild detergent solution

and warm water.

Dry the interior an

d exterior with a soft cloth.

When

the machine is not in use

drai

CARE AND MAINTENANCE

1. The i

ce maker should be cleaned on a regular basis. (See:”HOW TO CLEAN”)

2. It is necessary to have adequate ventilation space around the ice maker in order to

sustain proper performance, dissipation of heat, maintain efficiency, and low power

consumption. Clearance of minimum 15cm should be maintained at the rear and sides

of the unit and 20cm at the top of the unit.

3. To attain proper performance, be sure to plug the appliance into a properly

grounded 220-240/50 Hz outlet.

4. Do n

ot modify the power cord under any circumstances to allow the unit to be plugged

into a non-grounded outlet. To avoid heat damage to the power cord, please ensure that it

does not come in proximity or in direct contact with the compressor of the ice maker.

5. Please avoid installing the ice maker in a location where the appliance will come in contact

with water or moisture to minimize rusting of metal parts.

6.The ice maker should not be installed near any heat source or in a location where it will

come in direct contact with the sunlight.

USING YOUR ICE MAKER

1. Clean your ice maker thoroughly.

2. Open the cover, remove the ice basket and pour drinkable water (preferably purified water

or distilled water) into tank.

3. Plug in the unit and the “POWER” indicator light will blink.

4. Press "ON/OFF" on the control panel to begin the ice making cycle. The “POWER” indicator

light will illuminate.

5. Select the size of the ice cube by pressing the “SELECT” button. If ambient temperature

is below 16C it is recommended to select small size to avoid ice sticking together.

If power cord is damaged, immediately stop using the appliance, unplug appliance from the

mains power supply.

If changing the damaged power cord this must be and can only be safely

If changing the damaged power cord this must be and can only be safely done so by the manufacturer, its service agent or qualified electrical technician in order to avoid any potential safety hazards.

done so by the manufacturer, its service agent or qualified electrical technician in order to avoid

any potential safety hazards.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Mistral MIM12S IJsblokjesmachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Mistral. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Mistral MIM12S IJsblokjesmachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Mistral IJsblokjesmachines
Meer handleidingen voor IJsblokjesmachines

Gerelateerde producten

Handleiding

Mistral MIM12BLK IJsblokjesmachine

Handleiding

GE OPAL01GENSS IJsblokjesmachine

Handleiding

Girmi GH74 IJsblokjesmachine

Handleiding

Hoshizaki KM-100A IJsblokjesmachine

Handleiding

GE XPIOX3SCSS IJsblokjesmachine

Handleiding

Yoer IMW03BK IJsblokjesmachine

Handleiding

Klarstein 10045219 Caldwell IJsblokjesmachine

Handleiding

Summit BIM27OSADA IJsblokjesmachine

Gerelateerde categorieën