Handleiding Morco 30CPM Geiser

Handleiding voor je Morco 30CPM Geiser nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 2 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

1. USER INSTRUCTIONS
GAS SAFETY (INSTALLATION AND USE) REGULATIONS 1998 (AS AMENDED)
It
is
the law that all gas appliances are installed by a registered person,
in
accordance with the above regulations. Failure to install appliances correctly could
lead to prosecution. It
is
in
your own interest, and that
of
safety, to ensure that the
law
is
complied with.
Read these instructions carefully before attempting to operate the appliance.
Comply with all applicable warnings.
Do
not interfere with any sealed components,
and use the appliance only
in
accordance with these instructions.
This manual should
be
left with the owner of the boiler.
1.1
Introduction
The Marco 24CPM and 30CPM condensing combination boilers are wall hung,
room sealed, fan assisted, microprocessor controlled, fully modulating boilers
capable of supplying both central heating (CH) and instantaneous hot water (DHW).
The boiler can
be
set to work
in
a number of ways:
DHW supply only
CH
supply only
Both
CH
and DHW supply
The temperature of the
CH
and DHW supply can
be
set by using the knobs
on
the
control panel.
DHW Comfort Mode
The boiler has a "Comfort Mode" for hot water delivery only, that can
be
selected
on
the front panel.
In
this mode the boiler "learns" your hot water requirements and "pre-
heats" water prior to use to ensure faster delivery. With this mode switched
on
the
boiler will fire periodically even when
no
hot tap
is
opened-
this
is
normal operation.
With this mode switched off the boiler will only fire for hot water delivery when a tap
is
opened. This
is
called "economy mode"
LCD Display
Depending
on
the boiler status and user interaction with buttons and dials
on
the
control panel the following can
be
displayed
on
the LCD panel:
Temperatures of water
in
the
CH
circuit-
both actual and target
Temperature
of
DHW-
target only
Fault
Codes-
in
the event of a problem
Pressure
in
the
CH
circuit
3
Download de handleiding in het Nederlands en/of Engels (PDF, 7.36 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Morco 30CPM Geiser vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Morco 30CPM Geiser?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Morco 30CPM Geiser. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Morco 30CPM Geiser. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Morco. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Morco 30CPM Geiser in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Morco
Model 30CPM
Categorie Geisers
Bestandstype PDF
Bestandsgrootte 7.36 MB

Alle handleidingen voor Morco Geisers
Meer handleidingen voor Geisers

Veelgestelde vragen over Morco 30CPM Geiser

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Er komt water uit het overdrukventiel, is dat normaal? Geverifieerd

Ja, een boiler is een drukvat. Als de druk te hoog wordt dan zal de boiler dit verlagen door water af te voeren via het overdrukventiel. Degene die de boiler heeft geïnstalleerd zou goede afvoer moeten hebben aangelegd.

Ik vind dit nuttig (176) Lees meer

Wat is het verschil tussen een boiler en een geiser? Geverifieerd

Een boiler verwarmt het water voordat je het wilt gebruiken in de boiler. Bij een geiser wordt het water slechts verwarmt dat er doorheen stroomt wanneer je de kraan opendraait. Hierdoor kan het warme water bij een boiler op zijn wanneer alle voorraad is verbruikt. Daarnaast is het water dat uit een boiler komt direct warm, waarbij het water uit een geiser eerst koud is.

Ik vind dit nuttig (94) Lees meer
Handleiding Morco 30CPM Geiser

Gerelateerde producten

Gerelateerde categorieën