Handleiding Motorola DRC800 Afstandsbediening

Handleiding

Motorola DRC800 4-in-1

Universal Remote Control

User Guide

OVERVIEW

Your new Motorola DRC800 universal

4-in-1 remote operates your Motorola

or or other manufacturer's cable set-

top box and up to three other devices.

In addition, the DRC800 provides

advanced features such as Digital

Video Recording (DVR) control and

Picture-in-Picture (PIP) support.

You can lock volume control to any of

these devices, to make adjusting your

home entertainment volume easier.

See “Changing Volume Lock”. The

DRC800 comes from the factory

without the volume locked to any

specific device.

You can also change what type of

device each mode key controls. See

“Reassigning Device Keys”.

Operating Range

Your remote controls devices from up

to 50 ft (15 m) away if you are directly

in front of the device, or from up to 20

ft (6 m) away if you are off to either

side.

INSTALLING BATTERIES

Your remote requires 2 AAA batteries.

The first set of batteries is included,

and should last up to 6 months under

normal usage.

1. Remove the battery case cover

and the old batteries (if

necessary).

2. Follow the diagram inside the

battery case to insert the new

batteries.

You have ten minutes to replace the

batteries before your remote loses

memory.

USING YOUR REMOTE

To select a device to control, simply

press one of the device mode keys (TV,

AUDIO, DVD/VCR, CABLE) at the top of

your remote. After you set up the

remote to control that device, you may

begin using the device.

See “Programming Device Control”

for more information on identifying a

specific device to a device key.

PROGRAMMING DEVICE

CONTROL

Each of the additional device keys

controls a particular type of device.

For example, the DVD/VCR key

controls your VCR, DVR, or DVD

player, but not your TV, unless you

specify otherwise. See “Reassigning

Device Keys”.

To specif y a dev ice

1. Look up the device you want to

control in the device code list on

the back of this guide.

2. Press and hold a device key

(AUDIO, DVD/VCR, or TV) for at

least six seconds. The LEDs for

each device key light up, then the

LED for the device you selected

remains on.

3. Enter the four-digit code. The

device key LED turns off briefly

after each key press.

Note: You have 10 seconds to press

each digit. If it takes longer than

that, the remote “times out” and

you must begin again.

4. If the remote recognizes the

code, the device key’s LED blinks

three times. You can now test the

remote by pressing POWER. If

your device responds (turns off ),

you have found the right code. If

your device does not respond,

repeat steps 2 - 3 with the next

code in the list..

If the remote does not recognize

the code, the LED will turn off.

Retry the code (by repeating

steps 2-3 using the next code

listed for your brand), or search

for a device code. See “Searching

for Codes”.

SEARCHING FOR CODES

If none of the codes listed under

“Device Codes”on the back of this

guide match your device, you can

search for a set of commands that will

work. Your remote will sample all the

codes in its system for that device

mode to find one that will allow you to

control your device.

1. Press and hold a device mode

key (AUDIO, DVD/VCR, or TV) for

at least six seconds. The LED for

each device key lights up, then

the key for the device you

selected remains on.

2. Press a function key (such as

Power or Mute). The following

function keys are valid for

Searching (Power is

recommended):

•Power

•Mute

•Play

•CH +

•Stop

The device key’s LED blinks

three times, then turns off.

3. Press !. The remote will send

the IR command for the function

you pressed in Step 2.

4. If the device performed the

function you pressed, press OK.

The remote will now control the

device you selected in Step 1.

If the device did not perform the

function you pressed, repeat step

3. Press " to retry the previous

code.

Tip: Note the code set that worked, in

case you must re-code your remote:

DVD/VCR:

TV:

AUDIO:

See “Checking Codes”for more

information on noting code sets.

CHECKING CODES

1. Press and hold a device mode

key (AUDIO, DVD/VCR, or TV) for

at least six seconds. The LEDs

for each device key light up, then

the key for the device you

selected remains on.

2. Enter 9 9 0 to tell the remote you

are verifying the device code.

The LED blinks twice.

3. Press 1, then count the LED

blinks and write down the

number. If the LED does not

blink, the number is 0. This is

the first digit of the device code.

Press 2, 3, and 4 to obtain all

four-code digits.

CHANGING VOLUME LOCK

Locking the volume controls to a

single device makes it easier to control

volume, without having to guess

whether the volume will change. If you

lock the remote's volume controls to

the TV (for example), you will always

be able to change the volume to the

level you want, without having to

adjust it on multiple devices.

1. Press and hold the device mode

key (TV, AUDIO, DVD/VCR, or

Cable) corresponding to the

device you want to control

volume for at least six seconds.

The LED for each device key

lights up, then the key for the

device you selected remains on.

2. Press Volume +.

The device key’s LED blinks three

times, indicating it has locked the

volume control to the device you

selected. The AUDIO device key always

controls its own volume, regardless of

the device is locked to volume control.

Note: If you reassign AUDIO to

another device, such as a second TV,

the second TV will always control its

own volume.

Unlocking Volume Control:

1. Press and hold a device mode

key (TV, AUDIO, DVD/VCR, or

Cable) corresponding to the

device currently locked to the

volume controls for at least six

seconds. The LED for each

device key lights up, then the key

for the device you selected

remains on.

2. Press Volume -.

The device key’s LED blinks three

times, indicating it has unlocked the

volume control for all devices.

REASSIGNING DEVICE KEYS

Each device key accesses a specific

type of device (for example, the DVD/

VCR key can only be programmed to

control a DVD player, VCR, DVR, or

HTIB system). This makes it easier to

search for a code if your device’s code

does not appear on the list provided.

Your new remote allows you to change

the type of device that may be

assigned to a device key. That way, if

you have two TVs, for example, you

can control them both by changing the

type of device the DVD/VCR or AUDIO

key controls.

1. Press and hold the device mode

key (TV, AUDIO, DVD/VCR, or

Cable) corresponding to the type

of device you want the

reassigned key to control (for

example, TV) for at least six

seconds. The LED for each

device key lights up, then the key

for the device you selected

remains on.

2. Enter 9 9 2.

3. Press the device mode key you

want to reassign (for example,

AUDIO). That mode key’s LED

blinks three times and turns off,

indicating that it has been

reassigned.

The reassigned key automatically uses

the same device code as the key you

selected in Step 1. If your second

device uses a different code, you may

program it for the new code. See

“Programming Device Control”.

Note: You may not reassign the Cable

device key to another type of device.

Assigning a Key back to Its Original

Device Type:

1. Press and hold the device mode

key (TV, AUDIO, DVD/VCR, or

Cable) you want to reset to its

original type (for example,

AUDIO) for at least six seconds.

The LED for each device key

lights up, then the key for the

device you selected remains on.

2. Enter 9 9 2. The mode key’s LED

blinks three times and turns off.

3. Press the device mode key you

selected in Step 1 again. The

mode key’s LED blinks three

times and turns off.

4. Program the restored mode key

to control a device. See

“Programming Device Control”.

TROUBLESHOOTING

If you have trouble with your remote,

try the following steps in order.

My remote is not responding

• Review the information in

“Using Your Remote”to make

sure that the key you pressed is

active for the device you are

controlling.

• Make sure you are controlling

the device you think you are. See

“Using Your Remote”for more

information on choosing a

device to control.

• Make sure your batteries are

good. If battery power is low,

your remote enters a “Low

Battery Condition” to conserve

battery power for retaining your

settings. See “Installing

Batteries”for more information

on changing the batteries.

• Reset all settings:

• Press and hold a device

mode key (TV, AUDIO, DVD/

VCR, or Cable) or at least

six seconds. The LED for

each device key lights up,

then the key for the device

you selected remains on.

•Enter 9 8 1.

The LED blinks twice to indicate

that your remote is returned to

its factory settings. You will need

to reset all device code settings.

See “Programming Device

Control”.

ADDITIONAL INFORMATION

The Motorola DRC800 does not have

any user-serviceable parts. Opening

the case, except for the battery cover,

may cause permanent damage to your

Motorola remote control.

No part of this publication may be

reproduced, transmitted, transcribed,

stored in any retrieval system, or

translated to any language, in any

form, or by any means, electronic,

mechanical, optical, manual, or

otherwise, without the prior written

permission of Motorola.

MOTOROLA and the stylized M logo

are registered trademarks in the US

Patent and Trademark Office. All other

product and service names are the

property of their respective owners.

Copyright Motorola, Inc. 2003.

M1072 11/03

This product uses technologies

licensed under one or more of the

following U.S. patents:

6,587,067

6,195,033

6,496,135

Press this

Key

To…

Turn the selected

device ON or OFF

Audio, DVD/VCR,

TV, Cable

Select a device

Direct access to Video

On Demand (VOD),

where available

Direct access to Pay Per

View (PPV)

programming (where

available)

REW Rewind VCR, DVD,

VOD , DVR, or HTIB

PLAY Play VCR, DVD, VOD ,

DVR, or HTIB

FFWD Fast Forward VCR,

DVD, VOD , DVR, or

HTIB

RECORD Record to VCR or DVR

PAUSE Pause VCR, DVD, VOD

or DVR

STOP Stop VCR, DVD, VOD

or DVR

Replay the previous

few seconds of a

program (only

available with DVR

models)

Display a list of

programs that you

recorded. This will

allow you to select one

for viewing (only

available with DVR

models)

Displays live television

programming (only

available with DVR

models)

Mute current audio

feed

Jump among pre-

selected favorite

channels (only

available in CABLE

mode)

Note: Favorite

channels must be pre-

selected through the

Electronic

Programming Guide

before this key works.

Display the help screen

(only available in

CABLE mode)

Return to last selected

channel

VOL +/- Increase or decrease

volume

CH +/- Select the next or

previous channel

Move up or down

through menu screens

or the Electronic

Program Guide

Exit any On-Screen

Display (OSD) and

return to regular

viewing

Display channel and

program information

Access the cable guide

Access any OSD for the

currently selected

device

!

Move up through any

OSD or cable guide

menu

"

Move down through

any OSD or cable guide

menu

#

Move left through any

OSD or cable guide

menu

$

Move right through any

OSD or cable guide

menu

Select the currently

highlighted OSD menu

or cable guide choice

View the previous or

next day’s cable guide

These functions are set

by your cable provider

Press this

Key

To…

These functions are set

by your cable provider

These functions are set

by your cable provider

Enter a channel or

device code number. To

access channels lower

than 100, you may

need to enter 3 digits.

For example, to access

channel 2, press 0-0-2.

For channel 22, press

0-2-2.

Input Select the video source

Aspect Change the viewing

aspect (if available)

PIP ON/OFF Tur n Pictu re -in -

Picture (PIP) on or off

(if available)

PIP SWAP Swap the PIP signal to

the main display (if

available)

PIP Move Move the position of

the PIP display

PIP CH +/- Select the next or

previous channel in the

PIP display (the main

display does not

change)

This device

key…

Controls this type of

device…

TV TV

DVD/VCR DVD, VCR, DVR,

HTIB, TV/VCR,

TV/VCR/DVD,

and TV/DVD

Cable Cable box only

Audio Amplifier, Tuner

Press this

Key

To…

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Motorola DRC800 Afstandsbediening. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Motorola. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Motorola DRC800 Afstandsbediening in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Motorola Afstandsbedieningen
Meer handleidingen voor Afstandsbedieningen

Veelgestelde vragen over Motorola DRC800 Afstandsbediening

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.