Handleiding Motorola Talkabout T42 Walkie-talkie

Handleiding

Talkabout T42 Owner’s Manual

RF Energy Exposure and Product Safety Guide

for Portable Two-Way Radios

Attention!

Before using this product, read the RF Energy Exposure and

Product Safety Guide that ships with the radio which contains

instructions for safe usage and RF energy awareness and

control for compliance with applicable standards and

regulation.

T42 Twin Pack

Personalization Stickers:

Stickers are provided in order to personalize and keep track

of radios. Use permanent marker for the blank stickers.

Frequency Chart

Radio Control Buttons

Radio Display

Installing the Batteries

1. Make sure your radio is OFF.

2. To remove the battery compartment door, press the tab at

the bottom of the compartment door. Remove the door.

Insert three AAA batteries into the battery compartment.

3. Replace the battery compartment door.

Battery Level and Low Battery Alert

Turning Your Radio On/Off

Press and hold the MENU/ button to turn your radio ON/

OFF.

Adjusting the Volume

Adjust the volume by pressing the and buttons.

Talking and Listening

All radios in your group must be set to the same channel in

order to communicate.

1. Hold your radio 2 to 3 cm from your mouth.

2. Press and hold the PTT button while speaking. The

Transmit icon appears on the display.

3. Release the PTT button. You can now receive incoming

calls. When you do, the Receive icon appears on the

display.

For maximum clarity, hold the radio 2 to 3 cm away and avoid

covering the microphone while talking.

Talk Range

Your radio is designed to maximize performance and improve

transmission range. Ensure the radios are at least 5 feet

apart when in used.

Push-to-Talk Time-Out Timer

To prevent accidental transmissions and save battery life, the

radio emits a continuous warning tone and stops transmitting

if you press the PTT button for 60 seconds continuously.

Menu Options

Selecting the Channel

The radio uses channel as the frequency to transmit.

1. Press Menu until the channel number starts to flash.

2. Press or to change the channel. Long press on these

keys allows you to scroll through the channels rapidly to

browse the codes.

3. Press PTT button to exit menu or Menu to continue set

up.

Sub-Code

This radio does not have sub-code feature. When using this

radio with radio models that use sub-code, please make sure

the radios with sub-code have their sub-code disabled. Set

sub-code to Zero.

Call Tones

Your radio is equipped with a call tone. To transmit a call tone,

press / button.

Keypad Tones

You may enable or disable the keypad tones. You will hear

the keypad each time a button is pushed.

1. Press and hold the button, while turning the radio ON, it

turns the keypad tone OFF.

2. To turn the Keypad Tone ON, turn the radio OFF and ON

again without pressing the button.

Roger Tone

You can set your radio to transmit a unique tone when you

finish transmitting. It is like saying “Roger” or “Over” to let

others know you have finished talking.

1. Press and hold button while turning the radio ON, it turns

the Roger Tone OFF.

2. Turn the radio OFF and ON again without pressing the

button to turn the Roger Tone ON.

Keypad Lock

To avoid accidentally changing your radio settings:

1. Press and hold / Key Lock until the Key Lock Indicator

icon displays.

2. You can turn the radio on and off, adjust the volume,

receive, transmit, send a call tone, when in the lock mode.

All other functions remain locked.

3. Press / Key Lock and hold until the Key Lock Indicator

is no longer displayed to unlock the radio.

Channel Scan Mode

Enables your radio to scan for active channels. When an

activity is detected, your radio lands (stays) on that channel

for 2 seconds. To transmit on that channel, press the PTT

button. When an activity on the landed channel ends, your

radio continues scanning other channels.

To turn the channel scan ON:

1. MENU/ to enter menu. Advance until blinks.

2. / button to turn ON channel scan.

MENU/ or PTT to turn OFF Scan mode.

Monitor Mode

Enables you to listen for weak signals on the current channel.

To turn the Monitor Mode ON:

1. MENU/ button to enter menu. Advance through the

menu until icon blinks.

2. Press the / button for continuous listening. The icon

continues to blink.

To turn the Monitor Mode OFF:

Press the MENU/ button to return to “Normal” mode. The

icon stops blinking.

Easy Pairing

This feature allows a group of radio users to program all their

radios to the same Channel and Sub-Code settings quickly

and simultaneously. Any one radio within the group can be

designated as the “Leader’s radio” and have it’s Channel and

Sub-Code settings transmitted to and copied by all the other

radios in the group (Members’ radios).

Note:

•When the leader radio has no sub-code feature, such as this radio

(T42), all radios in the group will have their sub-code set to 0

(Disable). When the sub-code is set to 0, all transmissions on the

selected channel will be heard, regardless of the transmitting

radio sub-code setting.

1. Pick any one of the radios as the “Leader’s radio”. On this

radio, program the Channel and Sub-Code to the desired

settings. See “Selecting the Channel” and “Selecting the

Sub-Code” sections in this user manual. The sub-code for

T42 radio is fixed at zero and cannot be programmed.

2. To copy the channel and Sub-Code combination to all the

other “Members’ radios”, press and hold the button on

the Members’ radios until you hear a beep. Release the

button after the beep, and wait for the transmission from

the Leader’s radio.

Note:

• Icon blinks on the display. This confirms that the radio is in Easy

Pairing mode waiting to receive the Channel and Sub-Code

settings from the Leader’s radio. All Members’ radios remain in

this mode for 3 minutes.

• A group with many radios should have all users take this step at

the same time, so all radios can be programmed in one go.

3. On the Leader’s radio, press and hold down the button

until you hear a double beep.

Note:

• At the double beep, this radio’s Channel and Sub-Code settings

will be transmitted, which will be received and copied by all the

other (Members’) radios.

• The Leader’s radio must make this transmission when all the

Members’ radios are still in the Easy Pairing mode, otherwise the

transmission will not be picked up.

• On the Leader’s radio, user must remember not to release the

button on the first (single) beep, otherwise this radio will become

another Member’s radio. If that happens, you can press PTT to

escape, and retry the steps described in #3 again.

•When the Leader’s radio does not have sub-code feature, all

members’ radios will have their sub-code set to zero (Disable).

When a radio sub-code is set to zero, all transmissions received

on the channel will be sent to the speaker, regardless of the sub-

code embedded in the transmission.

•This radio (T42) does not have sub-code feature and is not

compatible with radios with sub-code enabled. Please ensure all

radios in the group have their sub-code disabled (Sub-code is set

to Zero). With Easy pairing, either use T42 as the leader, or ask

the Leader to set sub-code to zero before performing easy

pairing.

Warranty Information

The authorized Motorola Solutions dealer or retailer where

you purchased your Motorola Solutions two-way radio and/or

original accessories will honour a warranty claim and/or

provide warranty service.

Please return your radio to your dealer or retailer to claim

your warranty service. Do not return your radio to Motorola

Solutions.

In order to be eligible to receive warranty service, you must

present your receipt of purchase or a comparable substitute

proof of purchase bearing the date of purchase. The two-way

radio should also clearly display the serial number. The

warranty will not apply if the type or serial numbers on the

product have been altered, deleted, removed, or made

illegible.

What Is Not Covered By The Warranty

• Defects or damage resulting from use of the Product in

other than its normal and customary manner or by not

following the instructions in this user manual.

• Defects of damage from misuse, accident or neglect.

• Defects of damage from improper testing, operation,

maintenance, adjustment, or any alteration or modification

of any kind.

• Breakage or damage to aerials unless caused directly by

defects in material or workmanship.

• Products disassembled or repaired in such a manner as to

adversely affect performance or prevent adequate

inspection and testing to verify any warranty claim.

• Defects or damage due to range.

• Defects or damage due to moisture, liquid or spills.

• All plastic surfaces and all other externally exposed parts

that are scratched or damaged due to normal use.

• Products rented on a temporary basis.

• Periodic maintenance and repair or replacement of parts

due to normal usage, wear and tear.

Copyright Information

The Motorola Solutions products described in this manual

may include copyrighted Motorola Solutions programs, stored

semiconductor memories or other media. Laws in the United

States and other countries preserve for Motorola Solutions,

certain exclusive rights for copyrighted computer programs,

including the exclusive right to copy or reproduce in any form,

the copyrighted Motorola Solutions programs.

Accordingly, any copyrighted Motorola Solutions computer

programs contained in the Motorola Solutions products

described in this manual may not be copied or reproduced in

any manner without express written permission of Motorola

Solutions. Furthermore, the purchase of Motorola Solutions

products shall not be deemed to grant either directly or by

implication, estoppel, or otherwise, any license under the

copyrights, patents or patent applications of Motorola

Solutions, except for the normal non-exclusive royalty free

license to use that arises by operation of law in the sale of a

products.

M

Talkabout T42

Owner’s Manual

Package Content T42

Radio 2

Belt clip 2

Stickersheet (16 pieces) 1

Owner’s manual 1

Channel Frequency

(MHz)

Channel Frequency

(MHz)

Channel Frequency

(MHz)

1 448.7500 10 448.8625 19 449.1875

2 448.7625 11 448.8750 20 449.2000

3 448.7750 12 448.8875 21 449.2125

4 448.7875 13 448.9000 22 449.2250

5 448.8000 14 448.9125 23 449.2375

6 448.8125 15 448.9250 24 449.2500

7 448.8250 16 449.1500 25 449.2625

8 448.8375 17 449.1625 26 448.7375

9 448.8500 18 449.1750 27 449.1375

1. Keypad Lock

2. Easy Pairing

3. Mute

4. Scan Indicator

5. Battery Level Meter

6. Transmit

7. Receive

8. Channel Indicator

*MN005204A01*

MN005204A01-AB

Printed in

en-US

Antenna

Volume/Scroll

Speaker

Call Tone/

Lock

Menu/

Power

PTT Button

Easy Pairing

Button

Microphone

2

7

6

5

1

3

4

8

Blinks when battery power level is low; replace

batteries immediately.

Menu Key

Menu Key

Menu Key

Menu Key

Two Way Mode

Channel (1±)

6FDQ0RGH

0RQLWRU0RGH

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M

logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are

the property of their respective owners.

© 2018 Motorola Solutions, Inc. All rights reserved.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Motorola Talkabout T42 Walkie-talkie. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Motorola. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Motorola Talkabout T42 Walkie-talkie in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Motorola Walkie-talkies
Meer handleidingen voor Walkie-talkies