Handleiding NEC NC1700L Beamer

Handleiding

3

Important Information

• Do not look into the lens while the projector is on. Serious

damage to your eyes could result.

• Keep any items such as magnifying glass out of the light

path of the projector. The light being projected from the

lens is extensive, therefore any kind of abnormal objects

that can redirect light coming out of the lens, can cause

unpredictable outcome such as re or injury to the eyes.

• When turning on the projector, ensure that nobody is fac-

ing towards the lens in the path of the light emitted from

the laser.

• This product can only be operated in theaters by speci-

ed personnel. Customers should not operate this

product.

DOC Compliance Notice (for Canada only)

This Class A digital apparatus meets all requirements of the

Canadian ICES-003 Standards.

WARNING

This is a Class A product. In a domestic environment this

product may cause radio interference in which case the

user may be required to take adequate measures.

CAUTION

• In order to reduce any interference with radio and tele-

vision reception use a signal cable with ferrite core

attached. Use of signal cables without a ferrite core

attached may cause interference with radio and televi-

sion reception.

• This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the installa-

tion manual, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference

in which case the user will be required to correct the

interference at his own expense.

WARNING

THE END USER IS NOT ALLOWED TO OPEN OR

MODIFY THE PRODUCT.

NO USER SERVICEABLE PARTS.

MAINTAIN AND SERVICE OF THE PRODUCT IS ONLY

TO BE HANDLED BY NEC AUTHORIZED TECHNICIANS.

Important Safeguards

These safety instructions are to ensure the long life of your

projector and to prevent re and shock. Please read them

carefully and heed all warnings.

Installation

1. Do not point the projection beam toward other people or

reective objects.

2. Consult your dealer for information about transporting

and installing the projector. Do not attempt to transport

and install the projector yourself.

The projector must be installed by qualied technicians

in order to ensure proper operation and reduce the risk

of bodily injury.

3. Place the projector on a at, level surface in a dry area

away from dust and moisture. Tilting the front of the pro-

jector up or down from level could reduce laser life.

Do not put the projector on its side when the laser is on.

Doing so may cause damage to the projector.

4. Do not place the projector in direct sunlight, near heaters

or heat radiating appliances.

5. Exposure to direct sunlight, smoke or steam could harm

internal components.

6. Handle your projector carefully. Dropping or jarring your

projector could damage internal components.

7. When moving the projector, be sure to remove the lens

and chiller unit from the projector before moving it.

8. To carry the projector, a minimum of four persons are

required.

9. Do not hold the lens part with your hand. Otherwise the

projector may tumble or drop, causing personal injury.

10. Do not place heavy objects on top of the projector.

11. Turn off the projector, and disconnect the power cable

before moving the projector.

12. The cooling fan settings need to be congured when

using the projector in a location at an altitude of approxi-

mately 5500 feet/1600 meters or higher. Consult your

dealer in advance.

13. Turn off the projector when removing and installing

lenses. Failure to do so can cause loss of vision.

14. Do not install and store the projector in the below

circumstances.

Failure to do so may cause of malfunction.

• In powerful magnetic elds

• In corrosive gas environment

• Outdoors

15. When moving the projector, check the following:

• That the projector and chiller unit are turned off, the

power plug is disconnected from the outlet

• That the connector cable and hose that connects the

device to the projector is unplugged

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je NEC NC1700L Beamer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met NEC. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van NEC NC1700L Beamer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor NEC Beamers
Meer handleidingen voor Beamers

Veelgestelde vragen over NEC NC1700L Beamer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

NEC ME383W Beamer

Handleiding

NEC NP610 Beamer

Handleiding

NEC NC1843ML Beamer

Handleiding

NEC M350XS Beamer

Handleiding

NEC M333XS Beamer

Handleiding

NEC NC1803ML Beamer

Handleiding

NEC NP4100 Beamer

Handleiding

NEC M363W Beamer

Gerelateerde categorieën