Handleiding Nitecore EC21 Zaklamp

Handleiding

EC21

Features

· Utilizes CREE XP-G2 (R5) LED

· Maximum output of 460 lumens

· Integrated “Precision Digital Optics Technology” provides extreme reflector performance

· Boasts a peak beam intensity of 9400 cd and a throw distance of up to 194 meters

· Dual-switch design ensures unprecedented ease of use

· Secondary red LED provides constant / flashing illumination

· Indicates battery voltage with a red flashing LED (accurate to 0.1V)

· High efficiency constant current circuit enables maximum runtime of up to 430 hours

· Direct access to ultra-low and turbo output

· Reverse polarity protection prevents damage from incorrectly inserted batteries

· Detachable two-way anti-rolling clip

· Toughened ultra-clear mineral glass with anti-scratch coating

· Constructed from aero grade aluminum alloy

· HAIII military grade hard-anodized

· Waterproof in accordance with IPX-8 (2 meters submersible)

· Impact resistant to 1.5 meters

· Tail stand capability

Dimensions

Length: 4.25” (108mm)

Head diameter: 1” (25.4mm)

Tail diameter: 1” (25.4mm)

Weight: 2.10oz (59.5 gram) (without battery)

access ultra-low mode (1 lumen).

Instant Turbo Output

With the light switched off, press and hold the MODE button for more than one second to access

turbo mode (460 lumens).

NOTE: When in turbo mode, the EC21 will adjust output luminance automatically within 3 minutes

of use to prevent overheating and extend battery longevity.

Red Light / Signal Light Mode

With the light switched off, press the MODE button to enter red light mode. In this mode, the

secondary red LED will illuminate steadily.

When in red light mode, press and hold the MODE button for more than one second to enter

signal light mode. In this mode, the secondary red LED will flash to serve as a signal light.

Simply press any button to exit the red light /signal light mode.

Special modes (Strobe/Location/SOS)

With the light switched on, press and hold the MODE button for more than one second to enter

Strobe mode. When in strobe mode, press and hold the MODE button for more than one second

again to cycle through Location Beacon, SOS and Strobe modes. To exit, simple press the MODE

button to return to the brightness level last used, or press the ON/OFF button to switch the

light off.

Strobe Ready

With the light switched off, press the MODE button twice in quick succession to enter Strobe

mode. To exit, simply press any button.

Lockout / Unlock

With the light switched on, press and hold the ON/OFF button and the MODE button

simultaneously for over one second to switch the light off and enter lockout mode. In lockout mode,

the EC21 conserves battery power for over 12 months; the two buttons on EC21 will not work, thus

preventing accidental activation of the light. To exit lockout mode, simply press and hold the

ON/OFF button and the MODE button simultaneously for over one second again.

NOTE:

1. When entering lockout mode, the secondary red LED will continuously flash to indicate battery

voltage. Please refer to the “Power Tips” section for more details.

2. When the EC21 is kept in a backpack or left unused for extended periods, Nitecore recommends

the tailcap is loosened or batteries are removed to cut off the power entirely, thus preventing

accidental activation of the flashlight or battery leakage.

Power Tips

After battery installation or lockout mode activation, the secondary red LED will flash to indicate

battery voltage (accurate to 0.1V). For example, when battery voltage is at 4.2V, the red LED will

flash 4 times, followed by a one second pause and another 2 flashes. Different voltages represent

the corresponding remaining battery power levels:

Output & Runtime

NOTICE:

The stated data has been measured in accordance with the international flashlight testing

standards ANSI/NEMA FL1, using 1 x Nitecore 18650 battery (3.7V 2600mAh) or 2 x Nitecore

CR123 batteries (3V 1700mAh) under laboratory conditions. The data may vary during real-world

use due to different battery usage or environmental conditions

Operating Instructions

Battery Installation

Insert two CR123 batteries or one 18650 battery

as illustrated

NOTE: After loading the batteries, the secondary

red LED will flash to indicate battery voltage.

Please refer to the “Power Tips” section of this

manual for details.

WARNING:

Ensure batteries are inserted with the positive (+)

end pointing towards the head. The EC21 will not

be operational with incorrectly inserted batteries.

Accessories

Quality holster, Clip, lanyard,

spare O-ring

Battery Options

4.2V3.5V 3.7V 3.9V

Low Power Full Power

6.4V4.8V 5.6V 6.0V

Low Power Full Power

18650×1:

CR123×2:

TURBO HIGH MID LOW

LUMENS

210

LUMENS

460

LUMENS

100

LUMENS

20

4

h45min

1

h45min

50

h

12

h

4

h15min

1

h15min

48

h

10

h

LOWER

LUMENS

1

430

h

280

h

194m

(Beam Distance)

9400cd

(Peak Beam Intensity)

IPX-8, 2m

(Waterproof AND Submersible)

1.5m

(Impact Resistant)

2×CR123

18650

®

The All-Round Flashlight Expert

TYPE

Nominal voltage

Compatible

Primary Lithium battery

CR123 3V

Y (Recommended)

18650 Rechargeable Li-ion battery

18650 3.7V

Y (Recommended)

Rechargeable Li-ion battery

RCR123 3.7V

Y

Thanks for purchasing NITECORE!

User Manual

On / Off Operation

To switch ON: Press the ON/OFF button once.

To switch OFF: Press the ON/OFF button once again to switch the light off and enter standby mode

Standby Mode

With the light switched on, press and hold the ON/OFF button for more than one second to switch the

light off and activate the secondary red LED to flash once every three seconds to indicate the location of

the EC21. With the red LED on, the EC21 will operate for up to 108 consecutive days. With the red LED

off, the EC21 can remain on standby for more than 12 months.

Brightness Levels

With the EC21 switched on, press the MODE button repeatedly to cycle through the following

brightness levels: ultra-low, low, medium, high and turbo. Once a mode is selected it will be saved

and resume when the EC21 is reactivated.

Instant Ultra-low Output

With the light switched off, press and hold the ON/OFF button for more than one second to

Changing / Charging Batteries

Batteries should be replaced or recharged when output appears to be dim or the flashlight

becomes unresponsive.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of

silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any defective / malfunctioning NITECORE®

product can be repaired free of charge for a period of 60 months (5 years) from the date of

purchase. Beyond 60 months (5 years), a limited warranty applies, covering the cost of labor and

maintenance, but not the cost of accessories or replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact a local

NITECORE® distributor or send an email to [email protected]

※All images, text and statements specified herein this user manual are for reference purpose only.

Should any discrepancy occurs between this manual and information specified on

www.nitecore.com, information on our official website shall prevail. Sysmax Industry Co., Ltd.

reserves the rights to interpret and amend the content of this document at any time without prior

notice.

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: [email protected]

Web: www.nitecore.com

Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600

20150916

Please find us on facebook:

NITECORE Flashlights

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Nitecore EC21 Zaklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Nitecore. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Nitecore EC21 Zaklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Nitecore Zaklampen
Meer handleidingen voor Zaklampen

Veelgestelde vragen over Nitecore EC21 Zaklamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Nitecore HC35 Zaklamp

Handleiding

Nitecore E4K Zaklamp

Handleiding

Nitecore TIKI LE Zaklamp

Handleiding

Nitecore HC60 V2 Zaklamp

Handleiding

Nitecore NM01 Zaklamp

Handleiding

Nitecore P10iX Zaklamp

Handleiding

Nitecore LR70 Zaklamp

Handleiding

Nitecore P20iX Zaklamp

Gerelateerde categorieën