Handleiding Nitecore TM36 Zaklamp

Handleiding

User Manual

Features

• The world's smallest LED rechargeable searchlight with a maximum throw of 1100

meters

• Utilizes LUMINUS SBT-70 LED

• Integrated multi-function OLED display

• Thermal protection circuit prevents overheating

• Includes ultra-high performance NBP52 battery pack to double runtime

• Intelligent charging circuit with voltage detection charges safely and rapidly

• Eight rapidly switchable brightness levels and modes to select from

• Innovative single button two-stage switch provides a user-friendly interface

(Patented)

• Integral power indicator in the switch displays remaining battery power (Patented)

• Optimal heat dissipation to improve overall performance

• Toughened ultra-clear mineral glass with anti-reflective coating

• Integrated “Precision Digital Optics Technology” provides extreme reflector

performance

• Constructed from aerospace-grade aluminum alloy

• HAIII military grade hard-anodized

• Waterproof in accordance with IPX-8 (submersible to two meters)

Dimensions

Length: 278mm (10.94”)

Head diameter: 90 mm (3.54)

Tube diameter: 50mm (1.97”)

Weight: 1344g (47.41oz) (with battery pack)

Accessories

Standard charger adapter, quality sling and spare O-ring

Battery Options

NBP52 ultra-high performance Li-ion rechargeable battery pack

Operation Instructions

Battery installation

Tighten the NBP52 battery pack as instructed

Note: After tightening the NBP52 battery pack, “NITECORE” will be displayed

on the OLED screen for 2.5 seconds followed by battery voltage (accurate to

0.01V) for 4 seconds. After this the TM36 will enter into standby mode.

Thanks for purchasing NITECORE!

Output & Runtime

NOTICE

The above data has been measured in accordance with the international

flashlight testing standards ANSI/NEMA FL1 using the NItecore NBP52 battery

pack under laboratory conditions. The data may vary during real-world use

due to battery type, individual usage habits and environmental factors.

Lockout/Unlock

With the light turned on, press and hold the switch for more than one

second until the flashlight is switched off and enters into lockout mode.

Lockout mode consumes almost no battery power and prevents

accidental activation of the flashlight. To exit lockout mode, simply press

and hold the switch for more than one second again.

NOTE:

1. In lockout mode, the OLED display will show “LOCK OUT” as a

reminder when the switch or the display button is pressed.

2. When TM36 is kept in a backpack or left unused for extended periods,

Nitecore recommends users loosen the bezel to cut off power, thus

saving battery power and preventing accidental activation of the

flashlight.

Power Tips

1. With the light switched on, the power indicator will blink once every two

seconds when power levels drop to 50%.

2. With the light switched on, the power indicator will blink rapidly when

power levels are low.

NOTE: When the light is being used in ultra-low mode, the blue power

indicator will be off to help conserve power.

Thermal protection

Extended operation in Turbo mode will cause the tube temperature of

TM36 to continually rise, making it too scalding to hold. Thus, Nitecore

does not recommend using the TM36 in Turbo mode for extended

periods. Equipped with an integrated thermal protection circuit, the TM36

will automatically reduce its output to prevent overheating once tube

temperature has reached 60 degrees.

Precaution: When tube temperature is high, do not attempt to cool it by

submerging it in liquid. This faulty operation may cause irreparable

damage to the TM36 due to air pressure difference inside and outside of

the tube.

Charging Battery Pack

Battery pack should be replaced or recharged when any of the following

occurs: The power indicator blinks rapidly, output appears to be dim or

the flashlight becomes unresponsive.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a

thin coating of silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. DOA / defective

products can be exchanged for a replacement through a local

distributor/dealer within the 15 days of purchase. After 15 days, all

defective / malfunctioning NITECORE® products will be repaired free of

charge for a period of 60 months (5 years) from the date of purchase.

Beyond 60 months (5 years), a limited warranty applies, covering the cost

of labor and maintenance, but not the cost of accessories or replacement

parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by

unauthorized parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please

contact your national NITECORE® distributor or send an email to

[email protected].

®

The All-Round Flashlight Expert

TM 36

NITECORE (SYSMAX) is a member of PLATO, participating in and helping to

develop the ANSI FL1 standard of measurement. Product testing data is in

accordance with these internationally recognized scientific standards.

Charging the TM36

Connect the charging cable to the flashlight and the A/C power adapter to the

wall outlet as shown in the adjacent image.

General Operation

NOTE: The TM36 utilizes a 2-stage switch similar to a camera shutter button.

The light’s numerous functions are selected according to the depth the switch

is pressed.

The TM36 has two modes: Daily mode and Turbo mode. With the TM36 turned

off, press the switch partway down and release quickly to activate Daily mode.

Alternatively, with the TM36 turned off, press the switch all the way down and

release quickly to activate turbo mode.

Mode Selection

Daily mode: With the light off, press the switch partway down and release

within one second to enter this mode with constant-on illumination; press and

hold the switch partway down to activate momentary illumination with previous

daily mode brightness.

Turbo mode: press the switch all the way down and release within one second

to enter this mode with constant-on illumination; press and hold the switch all

the way down for more than one second to activate momentary illumination

with max brightness.

OLED Display

1. When the TM36 is turned on, the OLED display will activate automatically

and show output lumen, brightness mode, battery voltage, battery status,

remaining runtime and temperature. After displaying these readings, the OLED

display will be off automatically. To reactivate the OLED, simply press the

display switch. To cycle through the readings, press the display button in

sequence.

2. When in standby mode, a single press of the OLED display switch will

activate the OLED and display battery voltage for 10 seconds.

Brightness Selection In Daily Mode

1. With the TM36 turned on in Daily mode, press the switch partway down to

select a brightness level of ultra-low, low, medium or high. The selected

brightness level will be memorized when the light is turned off.

2. With the TM36 turned on in Daily mode, press the switch partway down and

hold to enter into turbo mode. A second partway press will revert back to the

brightness level last used.

Bright Selection In Turbo Mode

With the TM36 turned on in Search/Turbo mode, partway presses of the button

will cycle between high and ultra-high mode. Memory function is not available

in Search/Turbo mode.

NOTE: In turbo mode, the thermal protection will activate. Please refer to

Thermal Protection.

Standby Mode

With the TM36 turned on, press the switch all the way down and release within

one second to enter into standby mode. In this mode, the light will consume

small amounts of power to maintain the settings in the MCU (micro control unit)

while appear to be turned off. When in standby mode the power indicator light

will blink once every two seconds to indicate the location of the light.

Special Modes (Strobe / SOS / Location

Beacon)

With the light turned on, press the switch all the way down twice in quick

succession to access strobe mode. When in strobe mode, press the switch

partway down to cycle through SOS, location beacon and strobe modes. To

select a desired mode, simply release the switch when it is displayed. To exit

the special mode (enter into standby mode) fully press and release the switch.

NOTE: When in any of the special modes, the OLED display will remain on to

display the specific mode being used.

Demonstration mode

When entering standby mode, press the switch with the display button being

held simultaneously to enter Demonstration mode. In this mode, the OLED

display will present TM36’s functioning messages in a consecutive manner. To

exit Demonstration mode, simply press any button.

TURBO HIGH MID LOW

LUMENS

800

LUMENS

1800

LUMENS

400

LUMENS

200

5

h30min

1

h45min

21

h

11

h

LOWER

LUMENS

50

67

h

1100m

(Beam Distance)

310000cd (Peak Beam Intensity)

IPX-8, 2m

(Waterproof AND Submersible)

1.5m (Impact Resistant)

ParametersSpecifications

Voltage 3.7V

Capacity 65W(2300mAh×8)

Charging Current 1A（Trickle charge）/2A（Rapid charge）

Charging Port 3.5mm 12V DC Adpater / 4.5mm 12V DC Adpater

1. Under normal charging conditions, the on/off switch’s blue indicator light will

blink twice every second with the OLED screen display "Charging..." and

battery voltage.

2. If a problem is detected while charging the TM36 will stop charging, the blue

indicator will blink rapidly and the OLED display will show the word “ERROR”.

This is usually caused by faulty or incorrectly inserted batteries.

3. When charging is complete, the blue indicator will remain on,

and“Chg.Finished” along with battery voltage will be displayed on the OLED

screen.

The NBP52 battery pack can also be recharged independently. As shown, plug

one end of the adapter to the battery pack charging port (1A, 3.5mm), and plug

the other end to an outlet.

The integral blue charging indicator of NBP52 battery pack will blink to indicate

charging process:

1. When battery pack is being recharging, the blue indicator will blink rapidly.

2. When battery power level reaches 98%, the blue indicator will blink slowly.

3. When battery pack is fully charged, the blue indicator will illuminate steadily.

NOTE:

1. Charging the flashlight or the battery pack directly will require charging time

of approximately 16 hours.

2. Charging time can be reduced by half to 8 hours if the NBP52 battery pack is

recharged via the rapid charging port (2A, 4.5mm) using an optional 2A

adapter.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Nitecore TM36 Zaklamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Nitecore. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Nitecore TM36 Zaklamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Nitecore Zaklampen
Meer handleidingen voor Zaklampen

Veelgestelde vragen over Nitecore TM36 Zaklamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Nitecore TIKI GITD Zaklamp

Handleiding

Nitecore MH11 Zaklamp

Handleiding

Nitecore EA42 Zaklamp

Handleiding

Nitecore DL10 Zaklamp

Handleiding

Nitecore TINI2 SS Zaklamp

Handleiding

Nitecore TM20K Zaklamp

Handleiding

Nitecore i4000R Zaklamp

Handleiding

Nitecore Thumb LEO Zaklamp

Gerelateerde categorieën