Home > Fietsen & Brommers > Fietslampen > NiteRider Fietslampen > NiteRider MiNewt Mini 350 USB Fietslamp

Handleiding NiteRider MiNewt Mini 350 USB Fietslamp

Handleiding voor je NiteRider MiNewt Mini 350 USB Fietslamp nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

LED

LITHIUM ION

MiNewt Mini 350 – USB

MiNewt Mini 350 – USB Plus

Discover the Night!

Thank you for choosing the MiNewt Mini 350 - USB™ from NiteRider, the leading innovator in technical

lighting systems. The MiNewt Mini 350 - USB™ combines a high-powered white LED headlamp and a

Power Module containing light control, charging and safety circuits as well as the rechargeable

Lithium Ion battery.

To get the most from your NiteRider light, we urge you to familiarize yourself with the following safety

and operating instructions.

Riding at Night

While the MiNewt Mini 350 - USB™ will improve your control and enjoyment of night riding, please

remember that cycling at night is an inherently dangerous activity. In addition to using your lighting

system properly and riding with extreme caution, NiteRider urges you to:

• Never ride alone

• Always let someone know where you are going

• Wear a helmet and reflective clothing

• Carry an auxiliary light and emergency supplies

Protecting Your Investment

When not in use, always disconnect the headlamp from the power module. To unplug, grasp the

connector, not the cable. Properly charge your batteries to maximize their lifespan. Be sure to use

only the supplied AC Adapter, otherwise damage to the power module circuitry could occur. The

MiNewt Mini 350 - USB™ will perform in wet weather conditions, but submerging it in water will damage

the system. If you need a submersible light, NiteRider manufactures industrial-grade dive light systems.

For information, contact NiteRider Dive Lights at 858.268.3850 or visit

www.niteriderdive.com.

Support

If you experience difficulties during product installation or operation, NiteRider provides free

telephone support on weekdays from 8:00 AM to 4:30 PM (Pacific Time) at 800.466.8366, ext. 4. You

may also e-mail us at support@niterider.com.

Warranty

NiteRider stands behind its products with the following MiNewt Mini 350 - USB™ warranties:

• Lifetime warranty on all mechanical components

• 2 years on the headlamp, power module (excluding degradation of the battery cells) and AC Adapter

• 180 days on rechargeable batteries

To repair or replace your product while under warranty, return it (postage prepaid and insured with

original sales receipt) to the address below. Out-of-warranty repair service is also available. For

complete warranty information, please visit our website at www.niterider.com.

Parts List and Identification

Please verify the contents of your MiNewt Mini 350 - USB™ system:

A. “O-Ring” Handlebar Mounting Straps

B. Power Module

C. MiNewt Mini 350 - USB™ Headlamp

D. AC Adapter

E. USB Cable

F. Velcro Strap

The MiNewt Mini 350 - USB Plus™includes:

A. “O-Ring” Handlebar Mounting Straps

B. Power Module

C. MiNewt Mini 350 - USB™ Headlamp

D. AC Adapter

E. USB Cable

F. Velcro Strap

G. Helmet Mount

H. 36” Extension Cable

Mounting the Headlamp

Depending on the size of your bike’s handlebars, use one of the three “O-Ring” style mounting straps

to attach the headlamp/handlebar mount assembly. Follow the steps below.

1. Loosen the screw holding the mount assembly to the headlamp.

2. Hold the headlamp and twist the mount assembly, exposing the slot.

3. Place the desired O-ring mounting strap into the slot and twist the mount assembly back in its

original position. The mounting strap is now secure.

4. Before tightening the screw, align the headlamp. Place the headlamp/mounting assembly on the

handlebar and change alignment angle by twisting.

5. When properly aligned, tighten the screw.

6. Place the headlamp/mounting assembly on the handlebar. Pull/stretch the mounting strap under

the handlebar, towards the back and loop it over and into the back slot on the mounting assembly.

If you have difficulty getting the mounting strap into the back slot see the TIP below.

TIP: The 2 slots on the mounting assembly are different sizes.

The larger slot opening should face the back of the bike,

giving more room for attaching the mounting strap. The

smaller slot opening should face forward, reducing the

chance of dropping the mounting strap.

LARGER SLOT

Beoordeling

Laat ons weten wat je van de NiteRider MiNewt Mini 350 USB Fietslamp vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de NiteRider MiNewt Mini 350 USB Fietslamp?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de NiteRider MiNewt Mini 350 USB Fietslamp. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je NiteRider MiNewt Mini 350 USB Fietslamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met NiteRider. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van NiteRider MiNewt Mini 350 USB Fietslamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.