Home > Computers & Software > CPU Koelers > Noctua CPU Koelers > Noctua NH-L9a-AM4 CPU koeler

Handleiding Noctua NH-L9a-AM4 CPU koeler

Handleiding voor je Noctua NH-L9a-AM4 CPU koeler nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Noctua NH-L9a-AM4

Installation Manual

Dear customer,

Congratulations on choosing the Noctua NH-L9a-AM4. This small cooler

packs all essential technologies of our award-winning high-end models

into a highly compact package in order to give you the best possible quiet

cooling experience for HTPCs and small form factor builds. I’m confident

that you will be able to sense some of the research, attention and care

we’ve put into making this product.

Enjoy your Noctua NH-L9a on AM4!

Yours sincerely,

Roland Mossig, Noctua CEO

This manual will guide you through the installation process of the

SecuFirm2™ mounting system step by step.

Prior to installing the cooler, please consult the compatibility list

on our website (www.noctua.at/compatibility) and verify that the

cooler is fully compatible with your motherboard. In particular, if

your motherboard does not come with a pre-installed stock back-

plate, double check that there are no components on the rear side

that would prevent the installation of the NM-ABP4 backplate.

Should you encounter any difficulties, please check the FAQs on

our website (www.noctua.at/faqs) and don’t hesitate to contact our

support team at support@noctua.at.

Noctua cannot be held responsible for any damage or losses caused

by compatibility issues.

Multilingual versions of this manual are available on our

website: www.noctua.at/manuals

Required mounting parts:

NM-ABP4 backplate

2x NM-AFB6 fastening brackets 4x NM-ABT1 mounting-screw

Removing the stock retention module and backplate

Step 1

If your motherboard comes with a pre-installed CPU cooler retention

module, please first remove it by unscrewing it from the backplate. Then

remove the backplate.

If your motherboard does not come with a pre-installed CPU cooler reten-

tion module and backplate, please proceed with step 2.

If there are residual traces of thermal paste or thermal pads on your

CPU, please clean them off first. Then press a small drop (4-5mm

diameter) of the supplied NT-H1 thermal compound onto the centre of the

heatspreader.

Applying thermal paste

Step 2

Caution: Applying too much thermal paste will lower heat conductivity and

cooling performance!

Caution: Gently tighten the screws until they stop, but don’t use excessive

force (max. torque 0.6 Nm).

Fan setup

Step 4

Connect the fan to the motherboard.

Depending on your CPU and the temperature inside the case, you may inter-

connect the supplied NA-RC7 Low-Noise Adaptor (L.N.A.) in order to further

reduce the fan’s operating noise.

Caution: When using the L.N.A., check the temperature of your CPU using

appropriate software (e.g. the respective applications of your motherboard

manufacturer), in order to evade automatic throttling of the CPU due to

the increased temperature. If the cooling performance is insufficient, please

increase case ventilation or remove the L.N.A.

In case you would like to use a 92x25mm fan for further improved per-

formance, please first unscrew the preinstalled NF-A9x14 fan and use the

supplied longer screws to install the 92x25mm fan.

Warranty, support and FAQs

Even with high-grade products and strict quality control, the possibility of

defects cannot be eliminated entirely. Therefore, we aim at providing the

highest possible level of reliability and convenience by offering a warranty

period of 6 years and direct, fast and straightforward RMA service.

Should you encounter any problems with your Noctua product, please

check the FAQs on our website (www.noctua.at/faqs) and don’t hesitate

to contact our support team at [email protected].

Put the heatsink onto the CPU and the supplied NM-ABP4 backplate to

the rear side of the motherboard. Now stick the mounting screws through

the holes of the backplate and fix the cooler. Perform 3 turns on each

screw, then repeat until all are fully tightened.

Caution: Please make sure that the insulated side of the backplate is

facing the motherboard.

Fastening the heatsink to the CPU

Step 3

Beoordeling

Laat ons weten wat je van de Noctua NH-L9a-AM4 CPU koeler vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de Noctua NH-L9a-AM4 CPU koeler?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Noctua NH-L9a-AM4 CPU koeler. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Noctua NH-L9a-AM4 CPU koeler. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Noctua. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Noctua NH-L9a-AM4 CPU koeler in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.