11
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Front Panel≫ Rear Panel≫ Remote≫
1. ON/STANDBY button
2. PURE AUDIO button/indicator: Switches to the Pure Audio mode. ( p131)
3. HYBRID STANDBY indicator: Lights up when any of the following functions is
working or enabled in standby state of this unit. When this indicator is lighting,
the power consumption in standby state increases, however, the increase in
power consumption is minimized by entering the HYBRID STANDBY mode
where only the essential circuits operate.
– HDMI CEC ( p167)
– HDMI Standby Through ( p168)
– USB Power Out at Standby ( p172)
– Network Standby ( p172)
– Bluetooth Wakeup ( p173)
4. Display ( p12)
5. Remote control sensor: Receives signals from the remote controller.
• The reception range of the remote controller is within a distance of approx.
16´/5 m, and an angle of 20° in vertical direction and 30° to right and left.
6. Input selector buttons: Switches the input to be played.
BD (BD/DVD)
GAM (GAME)
CBL (CBL/SAT)
STM (STRM BOX)
PC (PC)
AUX (AUX INPUT HDMI)
CD (CD)
TV (TV)
PHN (PHONO)
TUN: AM/FM Radio
NET: Playing the Internet Radio, USB, etc.
: BLUETOOTH function
7. ZONE 2/ZONE 3 button: Controls the multi-zone function. (
p114)
OFF button: Switches the multi-zone function off. ( p114)
8. MASTER VOLUME
9. Press the LISTENING MODE button (above) to select a category from "Movie/
TV", "Music" and "Game", and then turn the LISTENING MODE dial (below) to
change the listening mode ( p123).
10.
Adjusts the sound quality. Press the TONE button (above) to select an item
to adjust from "Bass", "Vocal" and "Treble", and turn the TONE dial (below) to
adjust. ( p121)
11.
Front ap
12.
SLEEP button: Sets the sleep timer. Select the time from "30 min", "60 min"
and "90 min". ( p122)
13.
PHONES jack: Connect headphones with a standard plug (ø1/4″/6.3 mm).
14.
MUSIC OPTIMIZER button: Turns on/off the MUSIC OPTIMIZER function that
improves the quality of the compressed audio.
15.
HDMI OUT button: Select the HDMI OUT jack to output video signals.
( p153)
16.
INFO button: Switches the information on the display. ( p124)
17.
SETUP button: You can display advanced setting items on the TV and the
display to have a more enjoyable experience with this unit. ( p150)
18.
QUICK MENU button: Pressing this button during playback can make settings
such as "HDMI" and "Audio" quickly on the TV screen while playing.
( p177)
19.
Cursor buttons ( / / / ) and ENTER button: Select an item with the
cursors, and press ENTER to conrm your selection. When using TUNER, use
them to tune in to stations. ( p109)
20.
RETURN button: Returns the display to the previous state while setting.
21.
DIMMER button: Switches the brightness of the display with three levels. It
cannot be turned off completely.
22.
MEMORY button: Used to register AM/FM radio stations. ( p111)
23.
AUX INPUT HDMI jack: Connect a video camera, etc. using an HDMI cable.
( p76)
24.
SETUP MIC jack: Connect the supplied speaker setup microphone. ( p181)
25.
TUNING MODE button: Used to switch between automatic tuning and manual
tuning for AM/FM stations. ( p109)
26.
WHOLE HOUSE MODE button: Enable the WHOLE HOUSE MODE function
to play the same source in all rooms that are multi-zone-connected.
( p116, 118)
Praat mee over dit product
Laat hier weten wat jij vindt van de Onkyo TX-RZ840 Receiver. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.