Handleiding Oregon RMR112A Weerstation

Handleiding

Setting the Date

• Press and hold MODE button until the hour segment of the time display

flashes

• Press MODE button four more times until you see the date flash on the

display

• Press + button until the desired date appears on the display

• Press MODE button two more times to exit the set mode and resume normal

time keeping.

IMPORTANT: As soon as any manual setting changes are made, the display

will indicate a loss of signal strength (see SIGNAL STRENGTH INDICATOR)

to indicate that the clock is now running on manual settings instead of signals

received from the Atomic Clock.

Setting the Language

• Press and hold MODE button until the hour segment of the time display

flashes.

• Press MODE button five more times until you see a single letter (E, D, F, I

or S) appear on the display next to the time.

• Press + button until the desired language indicator appears on the display (E

for English, D for German, F for French ,I for Italian and S for Spanish).

• Press MODE button one more time to exit the set mode and resume normal

time keeping

WARNINGS

This product is designed to give you years of service if handled properly. Observe

the following guidelines:

• Never immerse the product in water. This can cause electrical shock and

damage the product.

• Do not subject the main unit to extreme force, shock, or fluctuations in

temperature or humidity.

• Do not tamper with the internal components.

• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-

zinc), or rechargeable (nickel-cadmium) batteries.

• Do not use rechargeable batteries with this product.

• Remove the batteries if storing this product for a long period of time.

• Do not scratch the LCD display.

TROUBLESHOOTING

Check here before contacting our customer service department.

SPECIFICATIONS

Temperature Measurement

Main unit

Indoor Temperature measurement

Displayed IN temperature range : -9.9°C to +70.0°C (-9.9°F to 158.0°F)

Proposed operating range : -5.0°C to +50.0°C (23.0°F to 122.0°F)

Temperature resolution : 0.1°C (0.2°F)

Remote Temperature measurement

Displayed OUT temperature range: -50.0°C to +70.0°C (-58.0°F to 158.0°F)

Proposed operating range : -5.0°C to +50.0°C (23.0°F to 122.0°F)

Temperature resolution : 0.1°C (0.2°F)

Remote unit

Displayed range : -50.0°C to +70.0°C (-58.0°F to 158.0°F)

Proposed operating range : -30.0°C to +60.0°C (-22°F to 140.0°F)

Temperature resolution : 0.1°C (0.2°F)

RF Transmission Frequency : 433 MHz

Number of Remote unit : Maximum of 3

RF Transmission Range : Maximum 30 meters or 100 feet

Temperature sensing cycle : around 30 seconds

Radio Controlled Clock

Main time set and synchronized by Radio Signal WWVB for USA

12hr display with hh : mm ss

Date Format : Month . Day

Day of week selectable in 5 language (E, D, F, I, S)

Four time zones with date and day

2-minute crescendo alarm

C. MEMORY BUTTON

Recalls the maximum or minimum temperature of individual channels

D. ALARM/24HR ALARM OFF BUTTON

Sets the time for the alarms

E. MODE/SET BUTTON

Toggles the display modes and confirms entry while setting the values for

the display

F. RADIO RECEPTION SIGNAL

Indicates the condition of radio reception

G. UP ( + ) BUTTON

Advances the value of a setting

H. ZONE BUTTON

Selects the US time zone

I . ALARM (AL) ON/OFF BUTTON

Enables or disables the alarms

J. RESET BUTTON

Returns all settings to default values

K. °C/°F SLIDE SWITCH

Selects between Centigrade (°C) and Fahrenheit (°F)

L. BATTERY COMPARTMENTS

One on each side. Each accommodates an AA-size battery

M. TABLE STAND

For standing the main unit on a flat surface

N. WALL-MOUNT RECESSED HOLE

For mounting the main unit on a wall

MAIN FEATURES: REMOTE UNIT

A. LCD

Displays the current temperature monitored by the remote unit

B. LED INDICATOR

Flashes when the remote unit transmits a reading

C

°C/°F SLIDE SWITCH

Selects between Centigrade (°C) and Fahrenheit (°F)

D. CHANNEL SLIDE SWITCH

Designates the remote unit Channel 1, Channel 2 or Channel 3

E. RESET BUTTON

Returns all settings to default values

F. BATTERY COMPARTMENT

Accommodates two AA-size batteries

G. BATTERY DOOR

Watertight sealed door is removed by sliding in downward motion.

H. WALL-MOUNT HOLDER

Supports the remote unit in wall-mounting

I. REMOVABLE TABLE STAND

For standing the remote unit on a flat surface

BEFORE YOU BEGIN

For best operation:

1. Assign different channels to different remote units.

2. Insert batteries for remote units before inserting batteries into the main unit.

3. Place the main unit as close as possible next to the remote unit, reset the

main unit after installing batteries. This will ensure easier synchronization

between the transmission and reception of signals.

4. Position the remote unit and main unit within effective transmission range,

which, in usual circumstances, is 20 to 30 meters or 60 to 100 feet.

NOTE: The effective range is vastly affected by the building materials and

where the main and remote units are positioned. Try various set-ups for best

result.

Though the remote units are weather-resistant, they should be placed away

from direct sunlight, rain or snow.

BATTERY AND CHANNEL INSTALLATION:

REMOTE UNIT

The remote unit uses two AA-size batteries. To install them:

1. Gently press against battery door and slide downward to remove.

2. Select the channel number on the CHANNEL slide switch.

Each remote unit (up to 3) will need to be set to a different channel.

3. Select the temperature display unit on the

°C/°F slide switch.

AA / UM-3 1.5V

AA / UM-3 1.5V

1CF RESETCH 23

AA / UM-3 1.5V

AA / UM-3 1.5V

1C F RESET CH 2 3

4. Insert the batteries according to the polarities shown inside the battery

compartment.

5. Replace the battery compartment door.

Replace the batteries when the low-battery indicator of the particular channel

lights up on the main unit. (Repeat the steps described in section "BEFORE

YOU BEGIN")

NOTE: Once a channel is assigned to a remote unit, you can only change the

channel by removing the batteries from the remote unit or resetting the main

unit.

Standard Alkaline batteries contain signifcant amounts of water. Because of

this they will freeze in low temperatures of approximately 10°F (-12°C).

Disposable Lithium batteries have a much lower threshold for temperature with

an estimated freezing range of below -40°F (-40°C). The Liquid Crystal Display

in outdoor thermometers will remain operational to -20°F (-29°C) with adequate

power.

Wireless ranges can be impacted by a variety of factors such as extremely cold

temperatures. Extreme cold may temporarily reduce the effective range between

thesensor and the base station. If the unit's performance fails due to low

temperature, the unit will resume proper functioning as the temperature rises to

within the normal temperature range (i.e no permanent damage will occur to

the unit due to low temperatures).

Power

Main unit : use 2 pcs UM-3 or “AA” 1.5V alkaline

battery

Remote sensing unit : use 2 pcs UM-3 or “AA” 1.5V alkaline

battery

Weight

Main unit : 8.08 ounces (229 g)

Remote sensing unit : 3.08 ounces (87.3g)

Dimension

Main unit : 136 x 108 x 27 mm or

5.35 x 4.25 x 1.06 inches

(L x W x T)

Remote sensing unit : 105 x 70 x 22.5 mm or

4.13 x 2.76 x 0.89 inches

(L x W x T)

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn more about Oregon

Scientific products such as digital cameras; MP3 players; children’s electronic

learning products and games; projection clocks; health and fitness gear; weather

stations; and digital and conference phones. The website also includes contact

information for our Customer Care department in case you need to reach us, as

well as frequently asked questions and customer downloads.

We hope you will find all the information you need on our website, however if

you’re in the US and would like to contact the Oregon Scientific Customer

Care department directly, please visit:

www2.oregonscientific.com/service/default.asp

OR

Call 1-800-853-8883.

For international inquiries, please visit:

www2.oregonscientific.com/about/international.asp

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) This device must accept any interference received, including interference

that may cause undesired operation.

WARNING Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

NOTE This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact for support or sales.

Please call our customer service number (listed on our website at

www.oregonscientific.com), or on the warranty card for this product) for all

inquiries instead.

We

Name: Oregon Scientific, Inc.

Address: 19861 SW 95th Ave., Tualatin, Oregon 97062 USA

Telephone No.: 1-800-853-8883

declare that the product

Product No.: RMR112A

Product Name:Multi-Channel IN-OUT Thermometer with Cable Free Sensor

and RF Clock

Manufacturer:IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1, 41 Man Yue St.,

Hung Hom, Kowloon,

Hong Kong

is in conformity with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: 1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference

that may cause undesired operation.

CAUTION

- The contents of this manual is subject to change without further notice.

- Due to printing limitations, the displays shown in this manual may differ

from the actual display.

- The contents of this manual may not be reproduced without the permission

of the manufacturer.

INTRODUCTION

Thank you for purchasing the Oregon Scientific RMR112A Indoor-Outdoor

Thermometer with 433MHz-cable free temperature sensor and radio-controlled

calendar clock.

This unique, versatile unit includes the indoor temperature, outdoor temperature

and calendar clock station. The remote unit transmits the outdoor temperature

back to the main unit via a radio signal.

The main unit has large read-outs for indoor temperature, calendar, clock and

temperatures collected and transmitted by the remote unit. The main unit can

support up to three remote units.

The main unit is capable of keeping track of the maximum and minimum

temperature of different sites. No wire installation is required.

The RMR112A operates at 433MHz. The calendar clock is radio-controlled. It

automatically synchronizes its current time and date when it receives the radio

signal generated from Colorado, USA (WWVB) which is operated by the US

Department of Commerce's National Institute of Standards and Technology.

You can also set the calendar clock manually when it is out of range of the

atomic clock signal. Other features include five-language display, crescendo

alarm and interchangeable display modes.

MAIN FEATURES: MAIN UNIT

A. FOUR-LINE DISPLAY

Facilitates easy reading of remote and indoor temperatures and calendar

clock

B. CHANNEL BUTTON

Selects among different channels

Wireless Thermometer with Self-Setting

Atomic Clock

MODEL: RMR112A

USER'S MANUAL

MAIN UNIT

REMOTE UNIT

H

I

B

A

AA / UM-3 1.5V

AA / UM-3 1.5V

1C F RESET CH 2 3

C

F

G

D

E

+

ZONE

ENGLISH

+

ZONE

+

Z

O

N

E

+

Z

O

N

E

BATTERY INSTALLATION: MAIN UNIT

The main unit uses two AA-size batteries. To install them,

1. Slide open the battery compartment doors.

2. Insert the batteries according to the polarities shown inside the battery

compartment.

3. Replace the battery compartment doors.

Replace the batteries when the low-battery indicator of the indoor temperature

lights up. (Repeat the steps described in section "BEFORE YOU BEGIN")

LOW BATTERY WARNING

When it is time to replace batteries, the respective low-battery indicator will

show up when the respective channel is selected. The battery level of the main

unit will be shown in the indoor temperature area when it is running low.

HOW TO USE THE TABLE STAND OR WALL

MOUNTING

The main unit has a removable table stand, which when connected, can support

the unit on a flat surface. Or you can remove the stand, store it on the back of

the unit and mount the unit on a wall using the recessed screwhole.

Wall-mount

Table stand

As for the remote unit, it comes with a wall-mount holder and a removable

stand. Use either to hold the unit in place.

Wall-mount Table stand

THE RESET BUTTON

This button is only used when the unit is operating in an unfavorable way or

malfunctioning. Use a blunt stylus to hold down the button. All settings will

return to their default values.

GETTING STARTED

Once batteries are in place for the remote units, they will start transmitting

temperature readings at 30-second intervals.

The main unit will also start searching for signals once batteries are installed.

Upon successful reception, the individual channel temperatures will be displayed

on the top line and the indoor temperature on the second line. The main unit

will automatically update its readings at about 30-second intervals.

If no signals are received, blanks "----" will be displayed and the kinetic wave

icon will show " . ". Press CHANNEL and MEMORY at the same time to

enforce another search for about 30 seconds. This is useful in synchronizing the

transmission and reception of the remote and main units.

Repeat this step whenever you find discrepancies between the reading shown

on the main unit and that on the respective remote unit.

HOW TO CHECK REMOTE AND INDOOR

TEMPERATURES

The indoor temperature is shown on the second line of the display.

The remote temperature is shown on the top line of the display.

(One remote unit comes in your package. Up to two additional remote units can

be purchased and set to the additional two channels.)

To check the remote temperatures, press CHANNEL to go from one channel to

another. The kinetic wave display on the channel number indicates the reception

of that particular channel is in good order.

If no readings are received from one particular channel for more than two minutes,

blanks "---" will be displayed until further readings are successfully searched.

Check to ensure that the remote unit is sound and secure. You can wait for a

little while or press CHANNEL and MEMORY at the same time to enforce an

immediate search. Of course no reading will be shown if no remote unit is

assigned to that channel.

The temperature trend indicator on the screen shows the trend of samplings

collected at that particular remote site. One of three trends will be shown: rising,

steady or falling.

If the temperature goes above or below the temperature measuring range of the

main unit or the remote unit (stated in specification), the display will show

"HHH" for over high or "LLL" for under low.

HOW TO READ THE KINETIC WAVE DISPLAY

The kinetic wave display shows the signal receiving status of the main unit.

There are three possible forms:

MAXIMUM AND MINIMUM TEMPERATURES

The maximum and minimum recorded indoor temperatures and those of each

channel will be automatically stored in memory. To display them,

1. Select the channel to be checked.

2. Press MEMORY once to display the maximum temperature and press again

to display the minimum temperature. The respective indicators, MAX or

MIN will be displayed.

To clear the memory, select the channel and hold down MEMORY for two

seconds. The maximum and minimum temperatures will be erased. If you press

MEMORY now, the maximum and minimum temperatures will have the same

values as the current ones until different readings are recorded.

DISCONNECTED SIGNALS

If without obvious reasons the display for a particular channel goes blank, press

CHANNEL and MEMORY at the same time to force an immediate search. If

that fails, check to ensure that:

1. The remote unit of that channel is still in place.

2. The batteries of both the remote unit and main unit are good. Replace as

necessary.

NOTE: When the temperature falls below the freezing point for extended periods

of time, the batteries of outdoor units may freeze, lowering their voltage supply

and the effective range. This may be resolved by the use of Lithium 1.5-volt

AA batteries which will supply voltage at much lower temperatures.

3. The transmission is within range and path is clear of obstacles and

interference. Shorten the distance when necessary.

TRANSMISSION COLLISION

Signals from other household devices, such as doorbells, home security systems

and entry controls, may interfere with those of this product and cause temporarily

reception failure. This is normal and does not affect the general performance of

the product. The transmission and reception of temperature readings will resume

once the interference recedes.

NOTE: SELECTION OF °C OR °F

The type of temperature display is selected on the main unit with the °C/°F slide

switch.

Select °C for Centigrade or °F for Fahrenheit.

NOTE: The remote temperature display on the main unit is dominated by the

selection on the °C/°F slide switch of the main unit. Whatever the display units

of the remote sensors are, they will be automatically converted to read in the °C/

°F selection of the main unit.

ABOUT RADIO RECEPTION

The split-second, precise timelines of RMR112A is achieved through its

pre-tuned internal radio receiver that responds to a special 60kHz frequency

time signal, generated by the US Atomic Clock, one of the most accurate clocks

in the world.

This extraordinary timepiece, located outside Boulder, Colorado, is operated by

the US Department of Commerce's National Institute of Standards and Tech-

nology.

Your RMR112A automatically activates its receiver for 2 to 10

minutes immediately upon battery insertion. Do not be concerned if your

RMR112A does not receive a signal within the first 72 hours. It will continue to

seek a signal six times every 24 hours. Due to possible interference, the best

reception often occurs between midnight and 4 am. If your unit has not picked

up a signal after 48 hours, remove and reinsert the batteries in the late evening.

Do not adjust the time zone until after the clock has picked up the signal.

SIGNAL STRENGTH

You may not receive a signal immediately. Please be patient with the first

receptions of the time signal. Due to possible interference, the best reception

often occurs between midnight and 4 am. If your unit has not picked up a signal

after 48 hours, remove and reinsert the batteries in the late evening. Do not

adjust the time zone until after the clock has picked up the signal. Once the

RMR112A has received a time signal, updates are accomplished with greater

ease. This unit like other radio equipment is most effective when it is placed

near a window. You may need to move or reposition your RMR112A.

Remember RMR112A not only sets itself to synchronize its digital time and

Arrow

indicator

Temperature

Trend

Rising Steady Falling

The unit is in searching mode.

Temperature readings are securely reg-

istered.

No signals.

date with the Atomic Clock's signal, but it also automatically adjusts for Daylight

Saving Time.

Your RMR112A also offers daily alarm clock function with day and date

display.

Indicators Meaning

Your last signal reception was excellent and time

synchronization with the US Atomic Clock has

Taken place.

Your last signal reception was insufficient and it

is recommended that you reposition or rotate the

antenna.

The displayed time has been manually set and is

not synchronized by the radio signal.

Your radio reception is disabled and no signal

reception will be initiated unless it is enabled

again.

SELECTING THE APPROPRIATE TIME ZONE

CAUTION: Do not press and hold the ZONE button for more than three seconds.

Press and release the ZONE button to advance the time zone one step. If you

press and hold the ZONE button, it will deactivate the automatic time signal

reception. (The tower icon will disappear.) To reactivate the time search, press

and hold the + button for three seconds.

• Press the ZONE button located on the back of the unit until the correct US

time zone is indicated on the LCD panel by a darkened section of the US

map in the lower right corner of the LCD panel

To see the time in a different time zone:

• Press the ZONE button located on the back of the unit to move one zone at

a time until the desired zone is indicated on the display panel.

The correct time for that zone will automatically be displayed.

SETTING THE ALARM

• Press the ((•)) button until the ((•)) symbol appears in the lower left corner of

the display panel. The alarm time will then also be displayed at the bottom

of the display panel.

• Press and hold the ((•)) button until the hour portion of the alarm time is

flashing.

• Press + button located on the back to increase the hour by one. Or press and

hold + button to rapidly advance the hour.

When the hour is set:

• Press ((•)) button again and the minutes will flash.

• Press + button located on the back to increase by one minute. Or press and

hold the + button to rapidly advance the minute to the desired time.

When the alarm time is set:

• The alarm will automatically arm itself. This will be indicated by the bell

icon, just above the ((•)) icon on the display panel.

If you do not want the alarm to sound at the time you just set:

• Press the AL ON/OFF key until the bell icon disappears.

ENABLING/DISABLING THE ALARM

To turn the alarm on or off:

• Press the AL ON/OFF button

NOTE: If the alarm is on, the bell icon will appear in the lower left corner of

the LCD. If the alarm is off, there will be no bell icon.

When the alarm sounds there are two ways to turn it off:

• Press ((•)) or AL ON/OFF button The alarm will not sound again until the

next day.

• Press AL ON/OFF again. The alarm will not sound again until reactivated.

MANUALLY SETTING THE TIME AND DATE

IMPORTANT: It is highly unlikely that you should ever need or want to set

these features manually; however, in the event that you should travel outside

the United States and want this capability, we include these instructions. As

soon as any manual setting changes are made, the display will indicate a loss of

signal strength (see SIGNAL STRENGTH INDICATOR) to indicate that the

clock is now running on manual settings instead of signals received from the

Atomic Clock. It is very unlikely that your unit will receive the time and date

signal in this mode. To reactivate the atomic signal press the reset button on the

rear of the unit or remove and reinsert the batteries.

Setting the Time

• Press and hold MODE button until the hour segment of the time flashes

• Press + button until the desired hour appears on the LCD panel

NOTE: Be sure to check the AM or PM symbol for accuracy

• Press MODE button again until the minute segment of the time flashes

• Press + button until the desired minutes appear on the LCD panel

• Press MODE button five more times to exit setting mode

Setting the Year

• Press and hold MODE button until the hour segment of the time display

flashes

• Press MODE button twice more until you see a year appear on the display

• Press + button until the desired year appears on the display

• Press MODE button four more times to exit the set mode and resume

normal time keeping.

Setting the Month

• Press and hold MODE button until the hour segment of the time display

flashes

• Press MODE button three more times until you see the month digit flash on

the display.

• Press + button until the desired month appears on the display

• Press MODE button three more times to exit the set mode and resume normal

time keeping.

No indicator

PROBLEM

Calendar

Clock

Temp

Remote

sensor

SYMPTOM

Strange date / month

Cannot adjust clock

Cannot auto-synch

Shows “LLL” or

“HHH”

Cannot locate

remote sensor

Cannot change

channel

Data does not match

main unit

REMEDY

Change language

Disable Atomic Clock

1. Adjust batteries

2. Press RESET

3. Manually activate

Atomic Clock feature

Temperature is out-of-

range

Check batteries

Check location

Check all sensors for

proper operation

Initiate a manual sensor

search

RMR112A EN_ES OP 1.P65 10/1/06, 10:35 AM1

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Oregon RMR112A Weerstation. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Oregon. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Oregon RMR112A Weerstation in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Oregon Weerstations
Meer handleidingen voor Weerstations

Beoordeling

Veelgestelde vragen over Oregon RMR112A Weerstation

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Oregon RMR132HG Weerstation

Handleiding

Oregon EB313HGN Weerstation

Handleiding

Oregon RMR202 Weerstation

Handleiding

Oregon BAR 938HG Weerstation

Handleiding

Oregon BAA 338PH Weerstation

Handleiding

Oregon TW 223 Weerstation

Handleiding

Oregon BAR 801 Weerstation

Handleiding

Oregon BAR 628HG Weerstation

Gerelateerde categorieën