4 (A, B, C, D)
LP (Long play)
RR-QR200
2
Within 10 seconds,
press [PLAY/STOP, SEL]
to set the item.
3
the day
2
the month
1
the year
Model
Folders
Available
recording
time
Recording mode
4
12 or 24 hour
time display
Changing modes
Each time [MODE] is pressed, the modes
change in the following order.
Locking files (see page 8)§
v
Recording mode (see page 5)
v
Microphone sensitivity (see page 5)
v
Voice activated system (see page 5)
v
Playback speed (see page 6)
v
Operation tone (see page 11)
v
Timer recording (see pages 9 and 10)
v
Timer playback (see pages 9 and 10)§
v
Time setting — year>month>day>
time display>time — (see above)
§Not displayed if there are no recordings.
Note .
≥The original display is restored if an operation isn’t performed within 10 seconds.
≥Settings can be canceled by pressing [STOP].
5
the time
1
Within 10 seconds,
turn [PLAY/STOP, SEL]
to select the item.
Correcting the time settings
Press [MODE] to display the setting you want to correct, then and
to change it.
43
1Press [FOLDER] to
select the folder to
record into.
2
Press [$REC, %PAUSE].
Recording begins and the record-
ing indicator lights
.
3Press [STOP].
Recording stops.
The display changes in the following order:
Recording time
Total number
of files
File number
Folder
SP (Standard play)
HQ (High quality)
RR-QR400
420 minutes
131 minutes
65 minutes
200 minutes
65 minutes
32 minutes
RR-QR100
100 minutes
31 minutes
15 minutes
To pause recording:
Press and hold [$REC, %PAUSE].
The recording indicator flashes.
Press again to resume recording.
To record through the external microphone:
Plug the external microphone (not included) into the [MIC] jack.
Then follow the steps 1-3 as illustrated above.
You can use a condenser microphone with or without built-in power supply.
Plug type: 3.5 mm (
1
⁄8 in.) monaural
To check available recording time:
Press [MODE] while recording.
Press again to restore the display.
Recording time displays
The display shows minutes and seconds.
: The display shows hours and minutes when the length of recording and
remaining recording time are 300 minutes or longer.
The time indicator is a rough guide to the remaining recording time. The sections
disappear as available time reduces and the last section flashes when there is about
10 percent left.
“FULL” is displayed when there is no time or file numbers left. Erase unnecessary
files to continue recording.
SELECT
SELECTSELECT
SELECT SELECT SELECT
SELECT
SET
SET SET
SET
SET SET
SET
Recording
Files can be stored in separate “folders”. Each folder can hold up to 99 files.
Total recording time depends on the model and recording mode (see page 5,
“Changing recording mode”).
Normal display
Available
recording
time
Time indicator
Setting the time
Set the time after inserting the batteries so the times for the recordings are saved.
Reset the clock regularly to maintain accuracy. (Monthly accuracy i/j 60 seconds.)
Repeat 1 and 2 to complete the settings.
B
B
REC
DATE
MD
B
REC
DATE
H
PM
M
B
MS
HQ
HQ
HQ
HQ
Note .
≥Total recording time is the combined time of all the folders.
≥The recording mode is originally set to “HQ”.
≥The recording being made can be lost if the unit receives a shock (e.g. it is
dropped), or if the batteries and cover come loose.
≥Leave VAS (page 5) off when recording important files.
Date
of recording
Time
of recording
Length
of recording
MIC
Built-in microphone
Recording indicator
This display also appears when there is
about 10% of the total recording time left.
Press [MODE] to show the normal record-
ing display for about 3 seconds.
RR-QR400
e.g. Display for
RR-QR400
Praat mee over dit product
Laat hier weten wat jij vindt van de Panasonic RR-QR200 Audiorecorder. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.