Handleiding Panasonic SC-AKX200E Stereoset

Handleiding

Your system and the illustrations can look

differently.

These operating instructions are applicable to

the following system.

Licenses

Maintenance

To clean this system, wipe with a soft, dry

cloth.

• Never use alcohol, paint thinner or benzine to

clean this system.

• Before using chemically treated cloth, read

the instructions that came with the cloth

carefully.

Safety precautions

WARNING!

Unit

• To reduce the risk of fire, electric shock or

product damage,

– Do not expose this unit to rain, moisture,

dripping or splashing.

– Do not place objects filled with liquids,

such as vases, on this unit.

– Use only the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer

servicing to qualified service personnel.

– Do not let metal objects fall inside this unit.

CAUTION!

Unit

• To reduce the risk of fire, electric shock or

product damage,

– Do not install or place this unit in a

bookcase, built-in cabinet or in another

confined space. Ensure this unit is well

ventilated.

– Do not obstruct this unit’s ventilation

openings with newspapers, tablecloths,

curtains, and similar items.

– Do not place sources of naked flames,

such as lighted candles, on this unit.

• This unit is intended for use in moderate

climates.

• This unit may receive radio interference

caused by mobile telephones during use. If

such interference occurs, please increase

separation between this unit and the mobile

telephone.

• This unit utilizes a laser. Use of controls or

adjustments or performance of procedures

other than those specified herein may result

in hazardous radiation exposure.

• Set the unit up on an even surface away from

direct sunlight, high temperatures, high

humidity, and excessive vibration.

AC power supply cord

•

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be

unplugged from the socket outlet immediately.

Battery

• Danger of explosion if battery is incorrectly

replaced. Replace only with the type

recommended by the manufacturer.

• When disposing of the batteries, please

contact your local authorities or dealer and

ask for the correct method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed

to direct sunlight for a long period of time

with doors and windows closed.

• Do not break open or short-circuit the

battery.

• Do not charge the alkaline or manganese

battery.

• Do not use the battery if the cover has

peeled off.

• Remove the battery if you do not use the

remote control for a long period of time.

Keep in a cool, dark area.

Supplied accessories

Check and identify the supplied accessories.

 1 AC power supply cord

 1 AM loop antenna

 1 FM indoor antenna

 1 Remote control

(N2QAYB001019)

 1 Remote control battery

About Bluetooth

®

Frequency band

• This system uses the 2.4 GHz frequency

band.

Certification

• This system conforms to the frequency

restrictions and has received certification

based on frequency laws. Thus, a wireless

permit is not necessary.

• The actions below are punishable by law:

– Taking apart or modifying the main unit.

– Removing specification indications.

Restrictions of use

• Wireless transmission and/or usage with all

Bluetooth

®

equipped devices is not

guaranteed.

• All devices must conform to standards set by

Bluetooth SIG, Inc.

• Depending on the specifications and settings

of a device, it can fail to connect or some

operations can be different.

• This system supports Bluetooth

®

security

features. But depending on the operating

environment and/or settings, this security is

possibly not sufficient. Transmit data

wirelessly to this system with caution.

• This system cannot transmit data to a

Bluetooth

®

device.

Range of use

• Use this device at a maximum range of 10 m.

• The range can decrease depending on the

environment, obstacles or interference.

Interference from other devices

• This system may not function properly and

troubles such as noise and sound jumps may

arise due to radio wave interference if this

unit is located too close to other Bluetooth

®

devices or the devices that use the 2.4 GHz

band.

• This system may not function properly if

radio waves from a nearby broadcasting

station, etc. is too strong.

Intended usage

• This system is for normal, general use only.

• Do not use this system near an equipment or

in an environment that is sensitive to radio

frequency interference (example: airports,

hospitals, laboratories, etc.).

System SC-AKX200

Main unit SA-AKX200

Speakers SB-AKX200

For Central America and the Caribbean

Operation is subject to the following two

conditions: (1) this device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operation.

The Bluetooth

®

word mark and logos are

registered trademarks owned by

Bluetooth SIG, Inc. and any use of such

marks by Panasonic Corporation is under

license. Other trademarks and trade names

are those of their respective owners.

Google Play and Android are trademarks of

Google Inc.

MPEG Layer-3 audio coding technology

licensed from Fraunhofer IIS and Thomson.

Recording and playback of content on this or

any other devices may require permission from

the owner of the copyright or other such rights

of that content. Panasonic has no authority to

and does not grant you that permission and

explicitly disclaims any right, ability or intention

to obtain such permission on your behalf. It is

your responsibility to ensure that your use of

this or any other devices complies with

applicable copyright legislation in your country.

Please refer to that legislation for more

information on the relevant laws and regulations

involved or contact the owner of the rights of

the content you wish to record or playback.

Panasonic bears no responsibility for data

and/or information that can possibly be

compromised during a wireless transmission.

Ű Note on disc

• This system can play CD-R/RW with CD-DA

or MP3 format content.

• Before playback, finalize the disc on the

device it was recorded on.

• Some CD-R/RW cannot be played because

of the condition of the recording.

Ű Note on USB device

• This system does not guarantee connection

with all USB devices.

• This system supports USB 2.0 full speed.

• This system can support USB devices of up

to 32 GB.

• Only FAT 12/16/32 file system is supported.

Ű Note on MP3 file

• Files are defined as tracks and folders are

defined as albums.

• Tracks must have the extension “.mp3” or

“.MP3”.

• Tracks will not necessarily be played in the

order you recorded them.

• Some files can fail to work because of the

sector size.

MP3 file on disc

• This system can access up to:

– 255 albums (including root folder)

– 999 tracks

– 20 sessions

• Disc must conform to ISO9660 level 1 or 2

(except for extended formats).

MP3 file on USB device

• This system can access up to:

– 800 albums (including root folder)

– 8000 tracks

– 999 tracks in one album

Customer Service Directory

Overview of controls

Do the procedures with the remote control.

You can also use the buttons on the main

unit if they are the same.

A Standby/on switch [`], [1]

Press to switch the unit from on to standby

mode or vice versa. In standby mode, the

unit is still consuming a small amount of

power.

B Select the audio source

On the main unit:

To start Bluetooth

®

pairing, press and hold

[ –PAIRING].

C Basic playback control

D View the setup menu

E View the content information

F Select or confirm the option

G Open or close the disc tray

H Decrease the brightness of the display

panel

To cancel, press the button again.

I Adjust the volume level

J Mute the sound

To cancel, press the button again.

“MUTE” is also canceled when you adjust

the volume or when you switch off the

system.

K View the play menu

L Select the sound effects

M Remote control sensor

Distance: Within approximately 7 m

Angle: Approximately 20° up and down,

30° left and right

N Select MP3 album or track

Press [ALBUM/TRACK] to select album or

track.

Browse tracks or albums

Turn [MULTI CONTROL] to browse.

To start playback from the selection, press

[4/9].

O USB A

USB port ( )

USB status indicator

Play MP3 tracks.

P USB B

USB port ( )

USB status indicator

Play MP3 tracks.

Record sound or music tracks.

Q Display panel

R Disc tray

S Recording operation control

T Select DJ jukebox

Preparing the remote control

Use alkaline or manganese battery.

Install the battery so that the poles (+ and –)

align with those in the remote control.

Placement of speakers

The left and right speakers are the same.

You cannot remove the net of the speakers.

Use only the supplied speakers.

You can cause damage to the system and

decrease the sound quality if you use other

speakers.

Note:

• Keep your speakers more than 10 mm from the

main unit for ventilation.

• Put the speakers on a flat safe surface.

• These speakers do not have magnetic shielding.

Do not put them near TVs, PCs or other

equipment easily influenced by magnetism.

• When you play at high levels for a long period, it

can cause damage to the speakers and

decrease the life of the speakers.

• Decrease the volume in these conditions to

prevent damage:

– When the sound is distorted.

– When you adjust the sound quality.

Making the connections

Connect the AC power supply cord only

after all the other connections have been

made.

1 Connect the AM loop antenna.

Stand the antenna up on its base until it

clicks.

2 Connect the FM indoor antenna.

Put the antenna where reception is best.

3 Connect the speakers.

4 Connect the AC power supply cord.

Do not use an AC power supply cord from

other equipment.

Conserving power

The system consumes a small amount of

power even when it is in standby mode.

Disconnect the power supply if you do not

use the system.

Some settings will be lost after you

disconnect the system. You have to set

them again.

Preparing media

Disc

1

Press [CD x] (main unit:

[x OPEN/CLOSE]) to open the disc tray.

Put in a disc with the label facing up.

Press again to close the disc tray.

2 Press [USB/CD] to select “CD”.

USB

Preparation

Before you connect a USB device to the

system, make sure you do a backup of the

data.

1 Decrease the volume and connect the

USB device to the USB port.

Hold the main unit when connecting or

disconnecting the USB device.

2 Press [USB/CD] to select “USB A” or

“USB B”.

USB status indicator lights up in red when

selected.

Note:

Do not use a USB extension cable. The system

cannot recognize USB device connected through a

cable.

Bluetooth

®

You can connect and play an audio device

wirelessly through Bluetooth

®

.

Preparation

• Switch on the Bluetooth

®

feature of the

device and put the device near the system.

• Read the operating instructions of the device

for details.

Ű Pairing a device

Preparation

If this system is connected to a Bluetooth

®

device, disconnect it (Z“Disconnecting a

device”).

1 Press [ ].

If “PAIRING” is shown, continue with

step 4.

2 Press [PLAY MENU] to select “PAIRING”.

3 Press [R, T] to select “OK? YES” and

then press [OK].

“PAIRING” is shown.

To cancel, select “OK? NO”.

4 Select “SC-AKX200” from the Bluetooth

®

menu of the device.

If prompted for a passkey, input “0000”.

The device connects with this system

automatically after pairing is complete.

The name of the connected device is

shown for a few seconds.

Using the main unit

1 Press and hold [ –PAIRING] until

“PAIRING” is shown.

2 Select “SC-AKX200” from the Bluetooth

®

menu of the device.

Note:

You can pair up to 8 devices with this system. If a

9th device is paired, the device that has not been

used for the longest time will be replaced.

Ű Connecting a device

Preparation

If this system is connected to a Bluetooth

®

device, disconnect it (Z“Disconnecting a

device”).

1 Press [ ].

“BLUETOOTH READY” is shown.

2 Select “SC-AKX200” from the Bluetooth

®

menu of the device.

The name of the connected device is

shown for a few seconds.

3 Start playback on the device.

Note:

• A device must be paired to connect.

• This system can only connect to one device at a

time.

• When “BLUETOOTH” is selected as the source,

this system will automatically try to connect to

the last connected device.

Ű Disconnecting a device

1 Press [ ].

2 Press [PLAY MENU] to select

“DISCONNECT?”.

3 Press [R, T] to select “OK? YES” and

then press [OK].

“BLUETOOTH READY” is shown.

To cancel, select “OK? NO”.

Using the main unit

Press and hold [ –PAIRING] until

“PAIRING” is shown.

Note:

A device is disconnected when you:

• Select a different source.

• Move the device out of the maximum range.

•

Disable the Bluetooth

®

transmission of the device.

• Switch off the system or the device.

Media playback

The following marks indicate the availability of

the feature.

Basic playback

CD USB BLUETOOTH

Note:

Depending on the Bluetooth

®

device, some

operations may not work.

Viewing available information

CD USB BLUETOOTH

You can view the available information, such as

MP3 album and track number, on the display

panel.

Press [DISPLAY].

Note:

• Maximum characters that can be shown:

Approximately 32

• This system supports ver. 1.0, 1.1 and 2.3 ID3

tags.

• Text data that the system does not support can

show differently.

Play menu

CD USB

1 CD

Press [PLAY MENU].

USB

Press [PLAY MENU] to select

“PLAYMODE”.

2 Press [R, T] to select the setting and

then press [OK].

Note:

• During random playback, you cannot skip to

tracks which have been played.

• The setting is canceled when you open the disc

tray.

Link mode

BLUETOOTH

You can change the link mode to suit the

connection type.

Preparation

If this system is connected to a Bluetooth

®

device, disconnect it (Z“Disconnecting a

device”).

1 Press [PLAY MENU] to select

“LINK MODE”.

2 Press [R, T] to select the mode and then

press [OK].

Note:

Select “MODE 1” if the sound is interrupted.

Obtain product information and operative

assistant; localize the closer distributor or

Service Center; buy spare parts and

accessories by our web site to Latin American:

http://www.lar.panasonic.com

Also you may contact us directly by our

Contact Center:

Panama 800-PANA (800-7262)

Colombia 01-8000-94PANA

(01-8000-947262)

Ecuador 1800-PANASONIC

(1800-726276)

Costa Rica 800-PANA737 (800-7262737)

El Salvador 800-PANA (800-7262)

Guatemala 1-801-811-PANA

(1-801-811-7262)

Chile 800-390-602

From a cell phone: 797-5000

Venezuela 800-PANA-800

(800-7262-800)

Uruguay 0-800-PANA (0-800-7262)

Peru 0-800-00-PAN (0-800-00726)

Argentina 0800-333-PANA

(0800-333-7262)

0810-321-PANA

(0810-321-7262)

Paraguay 0800-11-PANA

(0800-11-7262)

Dominican

Republic

809-200-8000

CAUTION!

• Use the speakers only with the

recommended system. If not, you can

cause damage to the amplifier and

speakers and can cause a fire. Consult

an approved service personnel if

damage occurs or if there is a sudden

apparent change in performance.

• Do the procedures included in these

instructions when you attach the

speakers.

4

3

1

2

To household

AC outlet

CD :

USB :

BLUETOOTH :

CD-R/RW in CD-DA format or with

MP3 files.

USB device with MP3 files.

Bluetooth

®

device.

Play Press [4/9].

Stop Press [8].

USB

The position is memorized.

“RESUME” is shown.

Press again to stop fully.

Pause Press [4/9].

Press again to continue playback.

Skip Press [2/3] or [5 /6] to

skip track.

CD USB

Press [R, T] to skip MP3 album.

Search Press and hold [2/3] or

[5/6].

OFF

PLAYMODE

Cancel the setting.

1-TRACK

1

Play one selected track.

Press [2/3] or [5/6]

to select the track.

1-ALBUM

1

Play one selected MP3 album.

Press [R, T] to select the MP3

album.

RANDOM

RND

Play all tracks randomly.

1-ALBUM

RANDOM

1 RND

Play all tracks in one selected

MP3 album randomly.

Press [R, T] to select the MP3

album.

ALL REPEAT Repeat all tracks.

1-TRACK

REPEAT

1

Repeat 1-TRACK.

1-ALBUM

REPEAT

1

Repeat 1-ALBUM.

RANDOM

REPEAT

RND

Repeat random playback.

1-ALBUM

RANDOM

REPEAT

1 RND

Repeat 1-ALBUM RANDOM.

MODE 1 Emphasis on connectivity.

MODE 2 Emphasis on sound quality.

Operating Instructions

Instrucciones de funcionamiento

CD Stereo System

Sistema estéreo con reproductor de discos compactos

Model No. SC-AKX200

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

Panasonic Corporation

Web Site: http://panasonic.net

© Panasonic Corporation 2015

PS

RQT9969-M

L0115LC0

Sp

PR

Muchísimas gracias por haber adquirido este aparato.

Para un desempeño y seguridad óptimos, por favor lea estas instrucciones cuidadosamente.

Guarde este manual para su consulta en el futuro.

PN

En

Overview of controls / Visión general de los controles

LX

Radio

Preparation

Press [RADIO/AUX] to select “FM” or “AM”.

Manual tuning

1

Press [PLAY MENU] to select

“TUNE MODE”.

2 Press [R, T] to select “MANUAL” and

then press [OK].

3 Press [2/3] or [5/6] to tune in

to the station.

To tune automatically, press and hold the

button until the frequency starts changing

quickly.

“STEREO” is shown when a stereo

broadcast is being received.

Using the main unit

1

Press [TUNE MODE] to select “MANUAL”.

2

Press [

2

/

3

] or [

5

/

6

] to tune in

to the station.

Memory presetting

You can preset up to 30 FM and 15 AM stations.

Ű Automatic presetting

1

Press [PLAY MENU] to select “A.PRESET”.

2

Press [

R

,

T

] to select “LOWEST” or

“CURRENT” and then press [OK].

The tuner presets all the stations it can

receive into the channels in ascending order.

To cancel, press [8].

Ű Manual presetting

1 Press [PLAY MENU] to select

“TUNE MODE”.

2 Press [R, T] to select “MANUAL” and

then press [OK].

3 Press [2/3] or [5/6] to tune in

to the station.

4 Press [OK].

5 Press [R, T] to select a preset number

and then press [OK].

Do steps 3 through 5 again to preset more

stations.

The new station replaces any station that

occupies the same preset number.

Ű Selecting a preset station

1 Press [PLAY MENU] to select

“TUNE MODE”.

2 Press [R, T] to select “PRESET” and

then press [OK].

3 Press [2/3] or [5/6] to select

the preset station.

Using the main unit

1 Press [TUNE MODE] to select “PRESET”.

2 Press [2/3] or [5/6] to select

the preset station.

Improving the sound quality

When “FM” is selected

1

Press [PLAY MENU] to select “FM MODE”.

2

Press [

R

,

T

] to select “MONO” and then

press [OK].

To cancel, select “STEREO”.

“MONO” is also canceled when you change

the frequency.

To memorize the setting

Continue with step 4 of “Manual presetting”.

When “AM” is selected

1

Press [PLAY MENU] to select “B.PROOF”.

2

Press [

R

,

T

] to select the setting that

provides the best reception and then

press [OK].

Checking the signal status

When “FM” is selected

Press [DISPLAY].

AM/FM allocation setting

By main unit only

For South America

This system can also receive AM broadcasts

allocated in 10 kHz steps.

For Central America and the Caribbean

This system can also receive FM broadcasts

allocated in 0.2 MHz steps.

1

Press [RADIO/AUX] to select “FM” or “AM”.

2

Press and hold [RADIO/AUX].

After a few seconds, the display panel shows the

current minimum radio frequency. Release the

button when the minimum frequency changes.

• To go back to the initial setting, do the above

steps again.

• Preset frequencies are erased after you

change the setting.

Recording

This system can record up to 800 folders

(maximum 999 tracks in an album) or a total of

8000 tracks, depending on the available

storage capacity of the USB device in

USB B .

To check storage space

In the stop mode, press [DISPLAY].

• “UPDATE” is shown when the system is

reading the device.

• “NO DEVICE” is shown if there is no USB

device connected to

USB B .

Note:

• All recordings are in “.mp3” format.

• You cannot do recording when you are using

random playback mode.

• DJ jukebox is switched off during recording.

• Repeat playback mode is canceled during

recording.

• A new album is added each time you do a

recording.

• The sequence of album may change after the

recording.

• The recordings are kept in a folder named

“REC_DATA” in the USB device.

• USB status indicator blinks in red during

recording.

Basic recording

1

Select the source you want to record.

CD-DA

Prepare the disc playback mode.

Make sure the disc is stopped.

Radio

Tune in to the radio station.

External equipment

Connect and play the equipment

(Z“External equipment”).

2 Press [USB REC 7/9] to start recording.

The name of the folder that keeps the

recording is shown.

Note:

• Wait for a few seconds for the system to prepare

the USB device before you start recording.

• When the next track of the disc is being

recorded, it will be shown on the display.

Ű High-speed recording

CD-DA disc recording speed:

CD, CD-R: Three times (3x) the normal speed.

CD-RW: Two times (2x) the normal speed.

1 Put in the disc you want to record.

2 Press [SETUP] to select “REC MODE”.

3 Press [R, T] to select “NORMAL” or

“HI-SPEED” and then press [OK].

4 Press [USB REC 7/9] to start recording.

Note:

•

If you cannot record at high-speed because of

the condition of the disc, record at normal speed.

•

The sound is muted during high-speed recording.

Ű Adding track marks

When recording from radio or external equipment,

you can divide tracks using various modes.

Before recording

1 Press [SETUP] to select “REC MODE”.

2 Press [R, T] to select the mode and then

press [OK].

Note:

• During recording, if you press [OK] or pause

recording while using “TIME MARK” mode, the

5-minute counter is reset.

• You cannot add track marks manually in

“SYNCHRO” mode.

Recording MP3 tracks

You can record MP3 tracks from MP3 disc or

USB A to USB B .

1 Prepare the source you want to record.

2 Press [USB REC 7/9] to start recording.

Note:

• Some tracks can use a longer time to record.

• Some tracks cannot be recorded because of the

condition of the source.

• When recording from an MP3 disc, the recorded

file name is different from the original file.

• When recording from USB A , the recorded file

name is the same as the original file (maximum

32 characters).

Deleting the recorded tracks

1

Press [USB/CD] to select “USB B”.

2 Press [R, T] to select the album.

3 Press [2/3] or [5/6] to select

the track.

4 Press [SETUP] to select “EDIT MODE”.

5 Press [R, T] to select the mode.

6 Press [OK].

The selected item to be deleted is shown.

7 Press [OK].

“SURE? NO” is shown.

8 Press [R, T] to select “SURE? YES” and

then press [OK].

“WRITING” is shown.

To cancel, select “SURE? NO”.

Sound effects

Preset EQ

1 Press [SOUND] (main unit: [LATIN EQ]) to

select “PRESET EQ”.

2 Press [R, T] to select the desired preset

EQ setting and then press [OK].

Or turn [MULTI CONTROL] to select the

desired preset EQ setting.

Manual EQ

1 Press [SOUND] (main unit: [LATIN EQ]) to

select “MANUAL EQ”.

2 Press [R, T] to select the sound effect.

Or turn [MULTI CONTROL] to select the

sound effect.

3 Press [2/3] or [5/6] to select

the setting and then press [OK].

D.Bass

1 Press [SOUND] to select “D.BASS” and

then press [R, T] to select

“D.BASS LEVEL” or “D.BASS BEAT”.

Or press [D.BASS] on the main unit to select

“D.BASS LEVEL” or “D.BASS BEAT”.

To cancel, select “OFF D.BASS”.

2 Press [2/3] or [5/6] to select

the setting and then press [OK].

Or turn [MULTI CONTROL] to select the

setting.

DJ jukebox

USB

You can use DJ jukebox to add cross-fading

effect between songs. You can also use

additional features with the “Panasonic MAX

Juke” app (Zbelow).

1 Press [PLAY MENU] to select

“JUKEBOX”.

2 Press [R, T] to select the setting and

then press [OK].

Using the main unit

Press [DJ JUKEBOX] to select the setting.

Ű Changing the repeat setting

1 Press [PLAY MENU] to select

“PLAYMODE”.

2 Press [R, T] to select the setting and

then press [OK].

Using the main unit

In the stop mode, turn [MULTI CONTROL] to

select the setting.

Note:

DJ jukebox is switched off when you switch off the

system, change to another source or during

recording.

Clock and timers

Setting the clock

For South America

This is a 24-hour clock.

For Central America and the Caribbean

This is a 12-hour clock.

1 Press [SETUP] to select “CLOCK”.

2 Press [R, T] to set the time and then

press [OK].

To check the time

Press [SETUP] to select “CLOCK” and then

press [OK].

In standby mode, press [DISPLAY].

Note:

Reset the clock regularly to maintain accuracy.

Sleep timer

The sleep timer switches off the system after

the set time.

1 Press [SETUP] to select “SLEEP”.

2 Press [R, T] to select the setting (in

minutes) and then press [OK].

To cancel, select “OFF”.

Note:

• The remaining time is always shown on the

display. The display changes temporarily when

you perform other operations.

• The play timer and sleep timer or the record

timer and sleep timer can be used together.

• The sleep timer always comes first. Be sure not

to set an overlap of timers.

Play timer and record timer

(Except for Bluetooth

®

and AUX source)

You can set the timer to come on at a certain

time to:

• Wake you up (play timer).

• Record from the radio (record timer).

Play timer and record timer cannot be used

together.

Preparation

Set the clock.

1 Press [SETUP] to select “TIMER ADJ”.

2 Press [R, T] to select “#PLAY” or

“#REC” and then press [OK].

3 Press [R, T] to set the start time and

then press [OK].

4 Do step 3 again to set the end time.

5 Press [R, T] to select the source you

want to play or record and then press

[OK].

To start the timer

1 Prepare the source.

2 Press [SETUP] to select “TIMER SET”.

3 Press [R, T] to select the setting and

then press [OK].

“#” is shown.

The system must be switched off for the

timer to operate.

To check the setting

1 Press [SETUP] to select “TIMER ADJ”.

2 Press [R, T] to select “#PLAY” or

“#REC” and then press [OK].

In standby mode, press [DISPLAY] two times.

LOWEST Tuning begins from the

lowest frequency.

CURRENT Tuning begins from the

current frequency.

FM – – – – The FM signal is in monaural.

The system is not tuned in to a

station.

FM ST The FM signal is in stereo.

FM MONO “MONO” is selected as the

“FM MODE”.

Record all

tracks

Select “OFF PLAYMODE”

(Z“Play menu”).

Record a

specified track

Select “1-TRACK”

(Z“Play menu”).

Stop

recording

Press [8]. “WRITING” is shown.

Pause

recording

Press [USB REC 7/9] during

recording.

Press again to continue recording.

Note:

You can pause during recording

from the radio or AUX (except in

“SYNCHRO” mode). A track mark is

added every time you pause

(Z“Adding track marks”).

MANUAL Add a track mark manually.

Press [OK] during recording to

add a track mark.

SYNCHRO

(For AUX

source)

Recording starts automatically

when the other equipment

starts to play.

Recording pauses when it

detects silence for 3 seconds.

TIME MARK A track is automatically divided

at 5-minute intervals.

Record all

tracks

Select “OFF PLAYMODE”

(Z“Play menu”).

Record a

specified album

or track

Select “1-ALBUM” or

“1-TRACK”

(Z“Play menu”).

Stop

recording

Press [8].

Recording stops at the last fully

recorded track in the album. For

example, if you stop recording

during the fourth track, only the

first three tracks are recorded.

“NO FILE RECORDED” is shown

if no track is recorded.

TRK DEL Delete a single track.

ALB DEL Delete one album (maximum

999 tracks).

FORMAT Format the USB device.

OFF CROSSFADE Cancel cross-fading.

ON CROSSFADE Add cross-fading.

OFF Switch off DJ jukebox.

RANDOM REPEAT

RND

Repeat random

playback.

ALL TITLE REPEAT Repeat all tracks.

Using the “Panasonic MAX Juke” app

You can download and install the free

Android™ app “Panasonic MAX Juke” on

Google Play™ for additional features, such as

to request song playback from multiple

devices simultaneously.

Play timer Prepare the source you

want to listen to (disc, USB

or radio) and set the

volume.

Record timer Connect the USB device to

USB B and tune in to the

radio station.

PLAY ON Start the play timer.

PLAY OFF Cancel the play timer.

REC ON Start the record timer.

REC OFF Cancel the record timer.

Note:

• The play timer starts at a low volume and

increases gradually to the preset level.

• The record timer starts 30 seconds before the

set time with the volume muted.

• The timer comes on at the set time every day if

the timer is on.

• If you switch off the system and then switch on

again while a timer is in operation, the timer will

not stop at the end time.

External equipment

You can connect a VCR, DVD player etc. and

listen to the audio through this system.

Preparation

• Disconnect the AC power supply cord.

• Switch off all equipment and read the

appropriate operating instructions.

1 Connect the external equipment.

2 Press [RADIO/AUX] to select “AUX”.

3 Play the external equipment.

To adjust the input level

1 Press [PLAY MENU] to select

“INPUT LEVEL”.

2 Press [R, T] to select “NORMAL” or

“HIGH” and then press [OK].

Note:

• You cannot adjust the input level during

recording.

• Select “NORMAL” if the sound is distorted

during “HIGH” input level.

• Components and cables are sold separately.

• If you want to connect equipment other than

those described, refer to the audio dealer.

• Sound distortion can occur when you use an

adapter.

Others

Auto off

This system automatically switches off when

you do not use it for approximately 20 minutes.

1 Press [SETUP] to select “AUTO OFF”.

2 Press [R, T] to select “ON” and then

press [OK].

To cancel, select “OFF”.

Note:

This function does not work when you are in radio

source or when a Bluetooth

®

device is connected.

Bluetooth

®

standby

This function automatically switches on the

system when you establish a Bluetooth

®

connection from a paired device.

1 Press [SETUP] to select

“BLUETOOTH STANDBY”.

2 Press [R, T] to select “ON” and then

press [OK].

To cancel, select “OFF”.

Note:

Some devices may take longer to respond. If you

are connected to a Bluetooth

®

device before

switching off the system, wait for a minimum of

5 seconds before connecting to this system from

your Bluetooth

®

device again.

Software version

You can check the software version of the

system.

1 Press [SETUP] to select “SW VER.” and

then press [OK].

The software version is shown.

2 Press [OK] again to exit.

Troubleshooting

Before requesting service, make the following

checks. If you are in doubt about some of the

check points, or if the solutions indicated do

not solve the problem, consult your dealer for

instructions.

Ű Common problems

The unit does not work.

• The safety device has been activated. Do the

following:

1. Press [1] on the main unit to switch the unit

to standby mode. If the unit does not switch

to standby mode,

– Press and hold the button for a minimum of

10 seconds. Or,

– Disconnect the AC power supply cord and

then connect it again.

2. Press [1] again to switch on the unit. If the

problem persists, consult your dealer.

The display panel lights up and changes

continuously in standby mode.

• Press and hold [8] on the main unit to select

“DEMO OFF”.

No operations can be done with the remote

control.

• Examine that the battery is installed correctly.

Sound is distorted or no sound.

• Adjust the volume of the system.

• Switch off the system, determine and correct the

cause, and then switch on again. It can be

caused by straining of the speakers through

excessive volume or power, and when using the

system in a hot environment.

A humming sound can be heard during playback.

• An AC power supply cord or fluorescent light is

near the cables. Keep other appliances and

cords away from the cables of this system.

The sound level reduces.

• The protection circuit has been activated due to

the continuous use at high volume output. This

is to protect the system and maintain the sound

quality.

Ű Disc

Display not shown correctly.

Playback does not start.

• You have not put in the disc correctly. Put it in

correctly.

• Disc is dirty. Clean the disc.

• Replace the disc if it is scratched, warped, or

non-standard.

• There is condensation. Let the system dry for

1 to 2 hours.

The total number of tracks displayed is incorrect.

The disc cannot be read.

Distorted sound is heard.

• You put in a disc that the system cannot play.

Change to a playable disc.

• You put in a disc that has not been finalized.

Ű USB

The USB device or the contents in it cannot be

read.

• The format of the USB device or the contents in

it are not compatible with the system.

• USB devices with storage capacity of more than

32 GB cannot work in some conditions.

Slow operation of the USB device.

• Large content size or large memory USB device

takes longer time to read.

Ű Bluetooth

®

Pairing cannot be done.

• Check the Bluetooth

®

device condition.

• The device is out of the 10 m communication

range. Move the device nearer to the system.

The device cannot be connected.

• The pairing of the device was unsuccessful. Do

pairing again.

• The pairing of the device has been replaced. Do

pairing again.

• This system might be connected to a different

device. Disconnect the other device and try

pairing the device again.

• The system may have a problem. Switch off the

system and then switch on again.

The device is connected but audio cannot be

heard through the system.

• For some built-in Bluetooth

®

devices, you have

to set the audio output to “SC-AKX200”

manually. Read the operating instructions of the

device for details.

Sound from the device is interrupted.

• The device is out of the 10 m communication

range. Move the device nearer to the system.

• Remove any obstacle between the system and

the device.

• Other devices that use the 2.4 GHz frequency

band (wireless router, microwaves, cordless

phones, etc.) are interfering. Move the device

nearer to the system and distance it from the

other devices.

• Select “MODE 1” for stable communication.

Ű Radio

Sound is distorted.

• Use an optional FM outdoor antenna. The

antenna should be installed by a competent

technician.

A beat sound is heard.

• Switch off the TV or move it away from the

system.

• Move mobile telephones away from the system

if the interference is apparent.

• When in AM tuner mode, select the “B.PROOF”

setting that provides the best reception.

A low hum is heard during AM broadcasts.

• Move the antenna away from other cables and

cords.

Ű Main unit displays

“ADJUST CLOCK”

• The clock is not set. Adjust the clock.

“ADJUST TIMER”

• The play timer and/or record timer is not set.

Adjust the play timer and/or record timer.

“ALB FULL”

• The number of albums has exceeded the

supported limit.

“AUTO OFF”

• The system has not been used for 20 minutes

and will switch off within a minute. To cancel,

press any button.

“CAN’T REC”

“DEVICE FULL”

• You cannot do recording because the remaining

recording time of the USB device is less than the

total time of the music source. Change to a USB

device which has enough recording time and do

the recording again.

“ERROR”

• An incorrect operation was done. Read the

instructions and try again.

“ERROR” (during recording)

• You cannot select other playback source

(example: radio, USB etc.) or press [2/3] or

[5/6] during recording. Stop the recording

function.

• You cannot open the disc tray when recording

from an AM source.

“F61”

• Examine and correct the speaker cords

connection.

• Disconnect the USB device. Switch off the

system and then switch on again.

“F70”

• Examine the Bluetooth

®

connection.

• Disconnect the Bluetooth

®

device. Switch off the

system and then switch on again.

“F76”

• There is a problem with the power supply.

• Disconnect the AC power supply cord and

consult your dealer.

“F77”

• Disconnect the AC power supply cord and

consult your dealer.

“NO DEVICE”

• The USB device is not connected. Examine the

connection.

• You cannot do recording or check available

storage space because there is no USB device

connected to

USB B .

“NO DISC”

• You have not put in a disc.

“NO PLAY”

“UNSUPPORT”

• Examine the content. You can only play

supported format.

• The files in the USB device can be corrupted.

Format the USB device and try again.

• The system may have a problem. Switch off the

system and then switch on again.

“NO TRACK”

• There is no album or track in the USB device.

“PLAYERROR”

• An unsupported MP3 file has been played. The

system will skip that track and play the next one.

“REC ERROR”

• You disconnected the USB device during

recording. Connect the USB device and do

recording again.

• An error occurred during USB recording.

Disconnect the USB device and then connect it

again.

“REMOTE 1”

“REMOTE 2”

• The remote control and the main unit are using

different codes. Change the code of the remote

control.

– When “REMOTE 1” is shown, press and hold

[OK] and [ ] for a minimum of 4 seconds.

– When “REMOTE 2” is shown, press and hold

[OK] and [USB/CD] for a minimum of

4 seconds.

“TEMP NG”

• The temperature protection circuit has been

activated, and the system will switch off. Let the

unit cool down before switching it on again.

• Check that the ventilation opening of the unit is

not obstructed.

• Ensure this unit is well ventilated.

“TRK FULL”

• The number of files has exceeded the supported

limit.

“USB OVER CURRENT ERROR”

• The USB device is using too much power.

Disconnect the USB device, switch off the

system and then switch on again.

“VBR”

• The system cannot show the remaining play

time for variable bit rate (VBR) tracks.

Remote control code

When other Panasonic equipment responds to

the remote control of this system, change the

remote control code for this system.

Preparation

Press [USB/CD] to select “CD”.

Ű To set the code to “REMOTE 2”

1 Press and hold [USB/CD] on the main

unit and [USB/CD] on the remote control

until “REMOTE 2” is shown.

2 Press and hold [OK] and [USB/CD] on

the remote control for a minimum of

4 seconds.

Ű To set the code to “REMOTE 1”

1 Press and hold [USB/CD] on the main

unit and [ ] on the remote control until

“REMOTE 1” is shown.

2 Press and hold [OK] and [ ] for a

minimum of 4 seconds.

System memory reset

Reset the memory when the following

situations occur:

• There is no response when buttons are

pressed.

• You want to clear and reset the memory

contents.

1 Disconnect the AC power supply cord.

2 While you press and hold [1] on the

main unit, connect the AC power supply

cord again.

Continue to press and hold the button until

“– – – – – – – –” is shown.

3 Release [1].

All the settings are set back to the factory

preset.

It is necessary to set the memory items

again.

Specifications

Ű Amplifier section

RMS output power stereo mode

Front Ch (both ch driven)

200 W per channel (4 ȍ), 1 kHz, 30% THD

Total RMS stereo mode power 400 W

Ű Tuner, terminals section

Preset memory FM 30 stations

AM 15 stations

Frequency modulation (FM)

Frequency range

For South America

87.50 MHz to 108.00 MHz (50 kHz step)

For Central America and the Caribbean

87.5 MHz to 108.0 MHz (100 kHz step)

87.9 MHz to 107.9 MHz (200 kHz step)

Antenna terminals 75 ȍ (unbalanced)

Amplitude modulation (AM)

Frequency range

For South America

522 kHz to 1629 kHz (9 kHz step)

520 kHz to 1630 kHz (10 kHz step)

For Central America and the Caribbean

520 kHz to 1710 kHz (10 kHz step)

AUX

Audio input Pin jack (1 system)

Ű Disc section

Disc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3 )

MPEG-1 Layer 3

Pick up

Wavelength 790 nm (CD)

Ű USB section

USB port

USB standard USB 2.0 full speed

Media file format support MP3 (*.mp3)

USB device file system

FAT12, FAT16, FAT32

USB recording

Bit rate 128 kbps

USB recording speed 1x, 3x (CD only)

Recording file format MP3 (*.mp3)

Ű Bluetooth

®

section

Version Bluetooth

®

Ver. 2.1 + EDR

Class Class 2

Supported profiles A2DP, AVRCP, SPP

Operating frequency 2.4 GHz band, FH-SS

Operation distance 10 m line of sight

Ű Speaker section

Speaker unit(s)

Woofer 16 cm cone type

Tweeter 6 cm cone type

Impedance 4 ȍ

Dimensions (W x H x D)

200 mm x 334 mm x 233 mm

Mass 3.3 kg

Ű General

Power supply

For South America AC 220 V to 240 V, 50/60 Hz

For Central America and the Caribbean

AC 120 V, 60 Hz

Power consumption

For South America 60 W

For Central America and the Caribbean 53 W

Dimensions (W x H x D)

348 mm x 193 mm x 251 mm

Mass 2.5 kg

Operating temperature range 0°C to +40°C

Operating humidity range

35% to 80% RH (no condensation)

Note:

• Specifications are subject to change without

notice.

Mass and dimensions are approximate.

• Total harmonic distortion is measured by the

digital spectrum analyzer.

Rear panel of

this main unit

DVD player (not supplied)

Audio cable

(not supplied)

Power consumption in standby mode

(approximate)

For South America 0.5 W

For Central America and the Caribbean 0.3 W

Power consumption in standby mode

(approximate)

(With “BLUETOOTH STANDBY” set to “ON”)

For South America 0.6 W

For Central America and the Caribbean 0.4 W

B3 4 Portrait.indd 1B3 4 Portrait.indd 1 05/01/2015 5:08:05 PM05/01/2015 5:08:05 PM

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Panasonic SC-AKX200E Stereoset. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Panasonic. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Panasonic SC-AKX200E Stereoset in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Panasonic Stereosets
Meer handleidingen voor Stereosets