Handleiding Panasonic WH-MXC09D3E5 Warmtepomp

Handleiding voor je Panasonic WH-MXC09D3E5 Warmtepomp nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

10
TROUBLESHOOTING
The following symptoms do not indicate malfunction.
The following symptoms do not indicate malfunction.
SYMPTOM
SYMPTOM
CAUSE
CAUSE
Flowing sound during operation. • Refrigerant ow inside the unit.
Operation is delayed a few minutes after restart. The delay is a protection to the unit’s compressor.
Mono bloc unit emits water/steam. Condensation or evaporation occurs on pipes.
Mono bloc unit emits steam during heating mode. This is due to defrost operation happens at the heat
exchanger.
Mono bloc unit does not operate. When the outdoor temperature is out of the operation
condition range, the heatpump system enter protection
control.
(Mono bloc) Air-to-water Heatpump system operation will
turn off.
If mono bloc unit water inlet temperature is lower than 20°C.
Backup heater power will turn on to heat up the water.
System dif cult to heat-up. When heating is operated together with oor heating or
panel heater simultaneously, there may be case where
warm water temperature is getting lower and cause oor
heating or panel heater heat-up is weaken.
When outdoor air temperature is low, it may be dif cult to
get warm.
Is the snow pile blocking the discharge outlet or intake
inlet of mono bloc unit.
When water outlet set temperature is low, it may be
dif cult to get warm.
System cannot get warm instantly. Due to the nature of the heatpump system, it may take
some time to heat-up the water if the unit is operated
from cold-start.
Operation starts after power resumes. Unit is operates under auto restart function.
Check the following before calling for servicing.
Check the following before calling for servicing.
SYMPTOM
SYMPTOM
CHECK
CHECK
Heating/cooling operation is not working ef ciently. Set the temperature correctly.
Is the panel heater valve closed.
Clear any obstruction at the air inlet and air outlet vents
of mono bloc unit.
Noisy during operation. Check if the unit has been installed at an incline or the
cover is not closed properly.
The unit does not work. Check if the circuit breaker is tripped.
Operation LED is no lit or remote control display
is blank.
Is the power supply off or power failure.
The operation LED blinks and error code appear on remote control display.
The operation LED blinks and error code appear on remote control display.
TIMER
TIMER
1
MON TUE WEDTHU FRI SAT SUN
2 3 4 5 6
ON
OFF
Turn the unit off and reveal the error code to authorized dealer.
Timer operation cancel when error code occur.
Force Heater Mode Button
Force Heater Mode Button
FORCE
In case of a failure of the (Mono bloc) Air-to-Water Heatpump system, the backup heater can be
used to heat up the heating water. Press
FORCE
to switch on the backup heater.
• Press
OFF
/
ON
to stop the force heater operation.
During Force Heater mode, all other operations are not allowed.
Download de handleiding in het Nederlands en/of Engels (PDF, 5.74 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Panasonic WH-MXC09D3E5 Warmtepomp vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Panasonic WH-MXC09D3E5 Warmtepomp?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Panasonic WH-MXC09D3E5 Warmtepomp. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Panasonic WH-MXC09D3E5 Warmtepomp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Panasonic. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Panasonic WH-MXC09D3E5 Warmtepomp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Panasonic
Model WH-MXC09D3E5
Categorie Warmtepompen
Bestandstype PDF
Bestandsgrootte 5.74 MB

Alle handleidingen voor Panasonic Warmtepompen
Meer handleidingen voor Warmtepompen

Handleiding Panasonic WH-MXC09D3E5 Warmtepomp

Gerelateerde producten

Gerelateerde categorieën