Handleiding Panasonic WV-CL274 Beveiligingscamera

Handleiding

1. The following functions are built in.

(1) Auto Light Control (ALC)/Electronic Light

Control (ELC)

(2) Automatic Gain Control (AGC) +18 dB

and Automatic Tracing White Balance

(ATW)

(3) Camera synchronization mode selec-

table between internal (INT), Line-locked

(LL) and Multiplexed Vertical Drive

(VD2).

FEATURES

2. Minimum illumination of 0.8 lx (0.08 foot-can-

dle) at F1.4

3. Signal-to-noise ratio of 50 dB

(Equivalent to AGC Off)

4. Horizontal resolution of 480 lines

5. Auto iris lens control selectable between

video signal and DC power supply.

1. The installation should be made by

qualified service personnel or system

installers.

2. Do not attempt to disassemble the camera.

To prevent electric shock, do not remove

screws or covers.

There are no user serviceable parts inside.

Ask a qualified service person for servicing.

3. Handle the camera with care.

Do not abuse the camera. Avoid striking,

shaking, etc. The camera could be damaged

by improper handling or storage.

4. Do not expose the camera to rain or

moisture, or try to operate it in wet areas.

Turn the power off immediately and ask a

qualified service person for servicing.

Moisture can damage the camera and also

create the danger of electric shock.

5. Do not use strong or abrasive detergents

when cleaning the camera body.

Use a dry cloth to clean the camera when

dirty.

In case the dirt is hard to remove, use a mild

detergent and wipe gently. Afterwards, wipe

off the remained part of the detergent in it

with a dry cloth.

6. Clean the CCD faceplate with care.

Do not clean the CCD with strong or abrasive

detergents. Use lens tissue or a cotton tipped

applicator and ethanol.

7. Never face the camera towards the sun.

Do not aim the camera at bright objects.

Whether the camera is in use or not, never

aim it at the sun or other extremely bright

objects. Otherwise, blooming or smear may

be caused.

8. Do not operate the camera beyond the

specified temperature, humidity or power

source ratings.

Use the camera under conditions where tem-

perature is between –10 °C - +50 °C (14 °F -

122 °F), and humidity is below 90 %. The

input power source is 220 V - 240 V AC 50 Hz

for WV-CL270, and 24 V AC 50 Hz for WV-

CL274E.

PRECAUTIONS

GND

AC 24V IN

12

VIDEO OUT

VIDEO OUT

<WV-CL270>

<WV-CL274E>

LL

INT

ELC

ALC

SOFT

SHARP

OFF

BLC ON

DC

VIDEO

LL

INT

ELC

ALC

SOFT

SHARP

OFF

BLC ON

DC

VIDEO

LL

INT

ELC

ALC

SOFT

SHARP

OFF

BLC ON

DC

VIDEO

LOCK

Fixing screws

Camera mounting

screw holes

Mount adapter

WV–

GL270

WV–

GL270

t

ew

q

r

io!0!1!2

y

!3

u

!3

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

q Auto Iris Lens Connector

Supplies power and control signals to an auto

iris lens (not supplied).

w Flange-back Adjusting Ring

This ring adjusts the back-focal distance or

picture focus.

e Lens (option)

r Mount Adapter

The camera mounting screw hole is for

mounting the camera onto a mounting brack-

et. The camera is originally designed to be

mounted from the bottom, however, a top-

mounting type is also available. To mount

from the top, remove the mount adapter from

the bottom of the camera by removing two

fixing screws. Attach the mount adapter to

the top as shown in the diagram, then mount

the camera on the mounting bracket. Make

sure that two original screws are used when

mounting the mount adapter; longer type

screws may damage inner components, too

shorter type screws may cause the camera

drop.

t Focus Fixing Screw

y Power Cord (only for WV-CL270)

Connect this power cord to an electrical out-

let of 220 V - 240 V AC 50 Hz.

u AC 24 V Input Terminal

[AC 24V IN] (only for WV-CL274E)

This terminal is for connecting the 24 V AC

50 Hz power supply cord.

i Synchronization Mode Selector

[INT, LL]

Selects the camera synchronization mode as

either internal sync mode (INT) or line-lock

mode (LL).

INT: Sets to internal 2:1 interlace.

LL: Sets to Line-lock mode.

o Back Light Compensation Mode Selector

[BLC ON, OFF]

Lets you select the mode according to the

position of the object and light conditions on

the screen.

ON: Select this mode when a strong light

such as a spotlight is in the background.

OFF: Normal picture.

!0 Detail/Aperture Level Selector [SHARP,

SOFT]

The detail/aperture level can be selected with

this selector. Set it to the desired position

while observing the picture on the monitor.

SHARP: Normal position.

SOFT: Select this position when a Quad

System is connected to this camera.

!1 Automatic Light Control/Electronic Light

Control Selector [ALC, ELC]

Lets you select the mode according to the

lens type used.

ALC: Select this mode when an auto iris lens

(ALC lens) is used with this camera.

ELC: Select this mode when a fixed iris lens

or manual iris lens is used with this cam-

era.

!2 Lens Drive Signal Selector [VIDEO, DC]

Lets you select the mode according to the

type of auto iris lens drive signal to be sup-

plied to the lens from the auto iris lens con-

nector.

VIDEO: Select this mode if you are using an

auto iris lens that requires a video drive

signal.

DC: Select this mode if you are using a auto

iris lens that requires a DC drive signal.

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

Ns0103-0 3TR001506AAA Printed in China

W

V–

GL270

(Lens: Option)

PREFACE

Panasonic’s WV-CL270/CL274E series digital sig-

nal processing colour CCD cameras introduce a

new level of high picture quality and high resolu-

tion through the use of a 1/2-inch interline transfer

CCD image sensor having 752 horizontal pixels

(picture elements), and digital signal processing

LSI’s. This model offers cutting-edge technology

for advanced video surveillance.

Colour CCTV Cameras

Operating Instructions

Model No. WV-CL270

WV-CL274E

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and mainte-

nance (servicing) instructions in the

literature accompanying the appli-

ance.

Power disconnection. Unit with or

without ON-OFF switches have

power supplied to the unit whenev-

er the power cord is inserted into

the power source; however, the

unit is operational only when the

ON-OFF switch is in the ON posi-

tion. The power cord is the main

power disconnect for all units.

The lightning flash with arrowhead

symbol, within an equilateral trian-

gle, is intended to alert the user to

the presence of uninsulated "dan-

gerous voltage" within the product's

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The serial number of this product may be found on

the bottom of the unit.

You should note the serial number of this unit in the

space provided and retain this instruction as a per-

manent record of your purchase to aid identification

in the event of theft.

Model No.

Serial No.

WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus

shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall

be placed on the apparatus.

Wij verklaren als enige aansprakelijke, dat het product

waarop deze verklaring betrekking heeft, voldoet aan

de volgende normen of andere normatieve docu-

menten, overeenkomstig de bepalingen van Richtlijnen

73/23/EEC en 89/336/EEC.

Vi erklærer os eneansvarlige for, at dette produkt, som

denne deklaration omhandler, er i overensstemmelse

med standarder eller andre normative dokumenter i

følge bestemmelserne i direktivene 73/23/EEC og

89/336/EEC.

Vi deklarerar härmed värt fulla ansvar för att den pro-

dukt till vilken denna deklaration hänvisar är i

överensstämmelse med standarddokument, eller andra

normativa dokument som framstölls i EEC-direktiv nr.

73/23 och 89/336.

Ilmoitamme yksinomaisella vastuullamme, että tuote,

jota tämä ilmoitus koskee, noudattaa seuraavia stan-

dardeja tai muita ohjeellisia asiakirjoja, jotka noudatta-

vat direktiivien 73/23/EEC ja 89/336/EEC säädöksiä.

Vi erklærer oss alene ansvarlige for at produktet som

denne erklæringen gjelder for, er i overensstemmelse

med følgende normer eller andre normgivende doku-

menter som følger bestemmelsene i direktivene

73/23/EEC og 89/336/EEC.

We declare under our sole responsibility that the prod-

uct to which this declaration relates is in conformity with

the standards or other normative documents following

the provisions of Directives EEC/73/23 and EEC/

89/336.

FOR YOUR SAFETY PLEASE READ THE FOL-

LOWING TEXT CAREFULLY.

WARNING: This apparatus must be earthed.

IMPORTANT

The wires in this mains lead are coloured in accor-

dance with the following code.

Green-and-yellow: Earth

Blue: Neutral

Brown: Live

As the colours of the wire in the mains lead of

this appliance may not correspond with the

coloured markings identifying the terminals in your

plug, proceed as follows.

The wire which is coloured green-and-yellow

must be connected to the terminal in the plug

which is marked with the letter E or by the earth

symbol I or coloured green or green-and-

yellow.

The wire which is coloured blue must be con-

nected to the terminal in the plug which is marked

with the letter N or coloured black.

The wire which is coloured brown must be con-

nected to the terminal in the plug which is marked

with the letter L or coloured red.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Panasonic WV-CL274 Beveiligingscamera. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Panasonic. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Panasonic WV-CL274 Beveiligingscamera in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Panasonic Beveiligingscamera's
Meer handleidingen voor Beveiligingscamera's

Beoordeling

Gerelateerde producten

Handleiding

Panasonic WV-CSR600 Beveiligingscamera

Handleiding

Panasonic WV-CW860 Beveiligingscamera

Handleiding

Panasonic WV-CP220 Beveiligingscamera

Handleiding

Panasonic WV-CS600 Beveiligingscamera

Handleiding

Panasonic WV-CSR650 Beveiligingscamera

Handleiding

Panasonic WV-CP230 Beveiligingscamera

Handleiding

Panasonic WV-CS650 Beveiligingscamera

Handleiding

Panasonic BL-C1CE Beveiligingscamera

Gerelateerde categorieën