Home > Dieren & Toebehoren > Elektronische halsbanden > PetSafe Elektronische halsbanden > PetSafe PDT00-15748 Smart Dog Elektronische halsband

Handleiding PetSafe PDT00-15748 Smart Dog Elektronische halsband

Handleiding voor je PetSafe PDT00-15748 Smart Dog Elektronische halsband nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 0 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

www.petsafe.net | Customer Care Center 1-800-732-2677 11

The Stay Command

1. Put a separate, non-metallic collar on your pet’s neck above the training collar, and attach a 10-foot

leash. NOTE: Be sure the extra collar does not put pressure on the contact points.

2. Visibly identify a designated area where you want your pet to sit by placing his bed or a large piece

of cloth on the ground.

3. After identifying a place, put your pet in that area. Hold your leash in one hand and your smartphone

in the other.

4. Staying within approximately 3 feet, walk around the perimeter of the designated area. Do not say

anything to your pet.

5. If your pet tries to leave that area, press and hold the tone button for 1 to 2 seconds, immediately

followed by continuously holding the vibration button while saying “Stay” and if necessary, use the

leash to guide your pet onto the designated area.

6. Immediately release the vibration button as soon as your pet returns to the area, and praise him

enthusiastically.

7. Once your pet has settled, release him and play calmly.

8. Repeat steps 3 to 7 several times.

9. If your pet stays reliably on receiving the spoken “Stay” command, then training is complete. Release

your pet and praise him. If your dog doesn’t respond to vibration after repeated attempts, switch to

static stimulation at your dog’s recognition level.

10. Put your pet on his designated area and walk around the perimeter as before.

11. Wait for your pet to try to leave that area. Using the recognition level for your pet, press and hold the static button while

saying “Stay” and if necessary guide your pet back onto the designated area.

12. Immediately release the buttons as soon as your pet returns to the area, and praise him enthusiastically.

13. Once your pet has settled, release him and play calmly.

14. Repeat steps 10 to 13 several times.

15. If your pet stays reliably on receiving the spoken “Stay” command, he may now be ready to respond without stimulation. Take

a play break and then go back and repeat from step 3 with tone only.

Eliminating Unwanted Behavior

Jumping Up

Jumping up on people is possibly the most common behavior owners would like to train their

dogs to not do. However, it’s likely it’s also the behavior our dog’s get the least consistent

response to. If you decide to train your dog not to jump, you must inform any friends, family

and visitors beforehand not to pet and play with your dog if they jump up on them. Any

inconsistency undermines your dog’s training and is unfair to your dog. If your dog is excited

by a newcomer, redirect their behavior by asking them to sit and reward them for doing so.

Use the steps below if your dog is having difficulty sitting with this added distraction:

1. Choose your pet’s recognition level.

2. As soon as your pet lifts his paws off the ground to jump on you, simultaneously give the “Sit” command and press and hold

the tone button for 1 to 2 seconds immediately followed by continuously holding the vibration button.

3. Release the vibration button immediately once your pet is sitting, and verbally praise him.

4. If your pet ignores the vibration, switch to static correction at your dog’s recognition level.

5. Practice this exercise in several different areas and use different people for distractions.

Beoordeling

Laat ons weten wat je van de PetSafe PDT00-15748 Smart Dog Elektronische halsband vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.

Bent u tevreden over de PetSafe PDT00-15748 Smart Dog Elektronische halsband?
Ja Nee

Beoordeel dit product als eerste

0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de PetSafe PDT00-15748 Smart Dog Elektronische halsband. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je PetSafe PDT00-15748 Smart Dog Elektronische halsband. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met PetSafe. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van PetSafe PDT00-15748 Smart Dog Elektronische halsband in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.